007 Edition direction · no-date tropical-tone dial · mesh bracelet plus separate woven strap pictured
Omega Seamaster Diver 300M 210.90.42.20.01.001 Replica Watch
This Omega Seamaster replica follows the 007 Edition / No Time To Die direction of reference 210.90.42.20.01.001. Ten still photographs document the no-date dial, warm-toned scale, mesh bracelet and clasp, military-style back, separate striped woven strap, visible markings and one thickness reading. The retained video was not watched.
One configuration is installed; the second strap and all material claims remain unverified
The mesh-style bracelet is mounted on the watch, while the striped woven strap is shown only beside it. TITANIUM-style inscriptions do not prove composition. The approximately 13.0 mm calliper display is a single thickness-direction reading without visible zero calibration or repetition.
Evidence boundary
OMEGA's official specifications describe the genuine reference. The photographs describe this sample and its pictured state. Similar styling, codes, engravings or TITANIUM text cannot prove genuine material, parts, licensing, calibre, certification or performance.
Official genuine context
42 mm · 49.60 mm · about 93 g
OMEGA also lists 13.48 mm thickness, Grade 2 titanium, Calibre 8806, 55 hours and 30 bar for the genuine reference.
Pictured sample
About 13.0 mm in one view
The single calliper photo follows a thickness direction but does not show zero calibration, repeated contact or a complete measurement set.
Accessory boundary
Mesh installed; woven strap separate
The striped strap, buckle and keepers are visible but never mounted, so inclusion, fit, material and hardware completeness need written confirmation.
A useful omega seamaster super clone comparison keeps official titanium specifications, sample inscriptions, installed bracelet state and accessory uncertainty in separate columns instead of treating similar 007 styling as proof.
Six supporting photo groups
Striped Woven Strap, Mesh Clasp and Military-Style Caseback
The remaining six photographs make the accessory set and bracelet hardware inspectable while keeping material and inclusion claims within the evidence.
Separate strap buckle and keepers
The pin buckle, Omega-style symbol, two keepers and 007-style detail are visible. The strap is not installed, and the image does not prove material, fit, completeness or genuine origin.
Accessory trace marks
TIZ012337-59-, GJB- and TITANIUM-style text can help match the pictured piece during final QC. It cannot certify titanium, an official part number, factory, batch or authenticity.
Woven strap construction overview
Both ends, hole row, stitching, buckle and keepers are visible. Width, length, fibre, wrist range, installation method and compatibility with this watch remain unmeasured.
Full-length colour and layout
A second overview confirms the black-edged, grey-and-warm-beige striped layout. It still does not connect the strap to the lugs, prove inclusion or show comfort on wrist.
Mesh clasp underside
Folding hardware, fine mesh and multiple style markings are visible under protective film. Composition, adjustment range, repeated lock security and sharp-edge condition need exact-unit testing.
Caseback and mesh adjustment points
The broad-arrow, 007, diving and number-style layout plus bracelet fasteners are clear visual checkpoints. They do not prove licensing, serial assignment, pressure, titanium or authentic manufacture.
Model-linked media retained
Native MP4 Retained Without Borrowing Unseen Claims
The 14,461,997-byte MP4 passed HTTP Range delivery with status 206. It was not watched, so it adds no evidence for bezel clicks, crown/valve operation, mesh security, woven-strap fit, timing, reserve, lume, water resistance or exact-unit continuity. Use a fresh cut-free clip for those checks.
Photo-based evidence chain
What the Archive Shows and What Final QC Must Add
Confirmed by still photos
No-date dark tropical-tone dial, warm beige-toned markers and bezel scale, broad-arrow-style details, steel/grey-tone case, installed mesh-style bracelet with folding clasp, military/007-style solid back, separate striped woven strap and one approximately 13.0 mm thickness-direction display.
Not confirmed
Factory, origin, licensing, Grade 2 titanium, aluminium, sapphire, standard diameter, lug-to-lug, sample weight, Calibre 8806, certification, accuracy, reserve, lasting lume, control function, pressure resistance, mesh durability or woven-strap inclusion/fit.
Best next request
One cut-free film-free sequence tying the exact dial and back to zeroed dimensions, mesh and woven configuration weights, strap swap, bracelet/clasp security, bezel/crown/valve operation, multi-position timing, reserve, lume and any agreed pressure result.
Omega replica watch buyer guide
210.90.42.20.01.001: 007 Styling, Two Wearing Systems and Sample QC
The pictured watch follows the intended 007 Edition configuration
The sample combines a no-date dark tropical-tone dial, warm beige-toned indexes and bezel scale, broad-arrow-style details, a military-style solid caseback and a mesh-style bracelet. Those elements align with the 210.90.42.20.01.001 design direction, but the photos cannot establish genuine manufacture or licensed origin.
Keep OMEGA specifications in a genuine-reference column
The OMEGA reference page lists 42 mm diameter, 49.60 mm lug-to-lug, 13.48 mm thickness, 20 mm between lugs and approximately 93 g. It also lists titanium, sapphire, Calibre 8806, 55 hours and 30 bar for the genuine watch only.
The 13.0 mm sample display is close, but not a certificate
One calliper image shows about 13.0 mm in a thickness direction, around 0.48 mm below the genuine reference's published 13.48 mm. The view lacks a visible zero check and repeat contacts. Request a film-free side-on measurement across the true highest crystal and caseback points.
A standard diameter and lug-to-lug view are still missing
No photograph measures the sample's crown-excluded case diameter or lug-to-lug length. Do not transfer OMEGA's 42 mm and 49.60 mm figures into the sample column. Final QC should show both axes with the calliper zeroed and its jaw endpoints unobstructed.
Dark tropical colour is visible; aluminium and brown classification need evidence
The dial and bezel appear very dark brown to black under the supplied lighting, with warm beige-toned printing and markers. OMEGA calls the genuine components brown tropical aluminium. Sample photographs prove the observed palette only, not aluminium, coating, ageing process or colour under neutral daylight.
No-date architecture separates this model from common Diver 300M pages
The lower dial carries a broad-arrow-style mark instead of a date window. That matters for model selection and movement claims: the genuine reference uses no-date Calibre 8806 rather than the date-equipped 8800. The sample's installed movement remains unverified behind its solid back.
Military and 007-style marks are visual checkpoints only
The back shows broad-arrow, 007, Diver 300M, 300m/1000ft, NAIAD LOCK- and military-number-style text. Use their spacing, orientation and surface finish in exact-unit QC. Never convert those inscriptions into evidence of licence, material, pressure, assigned number, provenance or authenticity.
Treat titanium-style words as claims that still need support
TITANIUM-style text is visible on the separate strap hardware and installed mesh-clasp assembly, alongside TIZ012337-59-, TIZ012342-, GJB-, HJB- and 54-style codes. These are trace details, not chemical analysis or confirmation of an OMEGA part number.
The installed mesh system deserves a complete mechanical check
The photographs expose the fine mesh, end connection, folding arms, adjustment holes/fasteners and filmed clasp. Ask for wrist sizing, full adjustment travel, repeated closure, pull security, edge inspection and a final film-free view before accepting comfort or durability.
The striped woven strap remains a pictured but unverified alternative
Black edging, grey central bands, warm beige stripes, holes, stitching, pin buckle and two keepers are clearly shown. Because it never appears on the watch, inclusion, width, total length, material, buckle completeness, installation route and wrist fit all remain open order questions.
Compare both wearing systems on the same exact unit
If the separate strap is part of the order, request one continuous swap from mesh to woven and back. The sequence should show all bars/tools, lug contact, clearance, security and final wrist fit. This connects the accessory to the physical watch rather than relying on a tabletop layout.
No photographed weight means no sample-weight claim
OMEGA publishes approximately 93 g for the genuine titanium-on-titanium reference, but this archive contains no scale image. A seller-stated or official weight cannot replace a reading for the sample. Ask for separate film-free weights on the mesh and woven configurations if both are supplied.
The solid back makes movement disclosure especially important
The sample photographs cannot expose the calibre. Ask the seller to name the installed movement, state service compatibility and show multi-position timing after full winding plus a later-reserve repeat. A dial layout or caseback inscription cannot establish Calibre 8806 or certification.
Bezel, crown and valve operation require continuous evidence
The front and side views show a right crown and left conical-valve-style control, but not threading, setting, winding, bezel clicks, valve action or sealing. One cut-free exact-unit clip should operate each control and return the bezel and hands to a documented final position.
Printed depth text is not a pressure test
OMEGA lists 30 bar for the genuine reference. The sample's 300m/1000ft- and Diver 300M-style markings do not prove water resistance. If the watch will contact water, agree on pressure, hold time, equipment, dry/wet method, pass criteria and post-test operation in writing.
Search phrases should route buyers to evidence, not grade slogans
omega copy watch, omega super clone, omega seamaster super clone, omega seamaster replica and high quality omega replica watches are discovery phrases from the supplied workbook. On this page they lead to the exact 007-style configuration, an accessory boundary and a measurable QC request.
The MP4 is retained without using unseen footage as evidence
The 14,461,997-byte video passed a 206 byte-range response and remains embedded, but it was not watched. No claim about control feel, mesh flexibility, woven-strap fit, timing, lume, water resistance or unit continuity is borrowed from unseen footage.
Compare nearby models by theme, date and wearing architecture
Choose the black/orange no-date 210.30.42.20.01.018 listing for another mesh-bracelet layout without military/007 styling, the 007-themed 210.22.42.20.01.004 listing for a date-equipped steel-bracelet direction, or the black 210.32.42.20.01.001 listing for a standard date window and grooved strap. Verify each linked sample independently.
Build a single identity chain for final approval
Keep the dark dial, no-date lower half, back engravings, mesh hardware and visible codes continuously identifiable while recording zeroed dimensions, both configuration weights, bezel/crown/valve operation, multi-position timing, reserve, lume and any agreed pressure test.
Write the accessory decision into the order record
Record installed mesh bracelet, whether the striped woven strap and all required fitting hardware are included, wrist size, installed movement, current price, accepted tolerances and water-use limits. Pay the balance only after the same unit and complete accessory set meet the written list.
Related model comparisons
Three Diver 300M Alternatives by Theme, Date and Bracelet
Use these pages to decide whether no-date clarity, 007 styling, a conventional date or a different wearing system matters most.
No-date mesh alternative
Seamaster 210.30.42.20.01.018
This black/orange option keeps a mesh-style bracelet and no-date layout while dropping the military/007 visual language.
007 date alternative
Seamaster 210.22.42.20.01.004
Choose this 007-themed direction for a date window, steel-tone bracelet weight and a separately pictured black strap.
Standard black strap alternative
Seamaster 210.32.42.20.01.001
The black date-equipped page uses a conventional wave-style dial and grooved strap rather than this no-date military-style presentation.
How Time-mimic Should Handle Your 210.90.42.20.01.001 Inquiry
The main watch and mesh bracelet direction is coherent, while the second strap remains only a tabletop accessory. Make material, fit and performance decisions from fresh exact-unit evidence.
1 · Lock watch and accessory set
Record no-date 007-style watch, installed mesh bracelet, striped woven strap, all fitting hardware, wrist size and current US$597 price.
2 · Keep one identity chain
Use the dial, military-style back, clasp and visible codes to connect measurements, strap swapping and testing to one physical unit.
3 · Complete missing QC
Add standard dimensions, both configuration weights, mesh/clasp/strap checks, controls, multi-position timing, reserve, timed lume and any agreed pressure test.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for the movement, crown, bezel, valve, mesh bracelet, clasp, woven strap/hardware set and any agreed pressure result.
Flexible options
Deposit, QC & Final Payment
After the configuration, sample evidence and requested tests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm the exact reference, visible configuration and wrist sizing
- 2. Confirm $597 and pay US$20 deposit to start sourcing/QC
- 3. Review fresh measurements, controls, movement, timing, reserve and requested tests
- 4. Pay balance only after exact-unit approval; then shipment begins
007 styling, titanium claims, bracelet, spare strap and QC questions
Omega Seamaster 210.90.42.20.01.001 Replica Watch FAQ
Do the photographs match reference 210.90.42.20.01.001?
They follow its 007 Edition / No Time To Die direction: no-date dark tropical-tone dial, warm beige-toned markers and bezel scale, broad-arrow-style detail, steel/grey-tone case, military-style solid back and installed mesh-style bracelet. This is visual alignment, not authentication or proof of titanium, aluminium, sapphire or movement identity.
What do the ten still photographs actually confirm?
They confirm the dark no-date dial, warm-toned scale, installed mesh-style bracelet and clasp, military/007-style back markings, a separate striped pass-through woven strap, visible code-style marks and one approximately 13.0 mm thickness-direction display. No weight, timing, reserve, pressure or lasting-lume result is pictured.
How should the 13.0 mm calliper display be interpreted?
It is a sample reading taken in a thickness direction, but the photograph does not document zero calibration, repeated contact or the exact highest points. OMEGA lists 13.48 mm for the genuine reference, so the pictured display is about 0.48 mm lower; that difference does not prove construction or identity.
Is the striped woven strap included and compatible?
The strap, buckle and keepers are clearly shown beside the watch, but it is never installed. Confirm in writing whether it is included, its material, width and total length, the buckle/keeper set, spring-bar or pass-through installation method, wrist fit and whether any adapters or tools are required.
Do TITANIUM-style markings prove the case, bracelet or buckle material?
No. TITANIUM-style text appears on woven-strap and mesh-clasp hardware, but an inscription is not a composition test. OMEGA specifies Grade 2 titanium for the genuine reference. The sample needs its own seller disclosure and, if material matters, an appropriate non-destructive verification method.
Do the 007 and military-style caseback marks prove authenticity?
No. Broad-arrow, 007, Diver 300M, NAIAD LOCK- and military-number-style details are visible and useful for visual QC. They do not establish licensing, serial allocation, manufacture, pressure rating, material or genuine origin. Check placement and consistency only as sample appearance.
Is the sample proven water resistant to 300 metres?
No. The sample has 300m / 1000ft-style caseback text, but no pressure result is pictured. OMEGA's 30 bar rating applies to the genuine watch. Define test pressure, unit, equipment, hold duration, pass criteria and post-test function checks before payment or water exposure.
Do the photographs prove Calibre 8806 or a 55-hour reserve?
No. The solid caseback hides the installed movement, and there is no timegrapher or reserve test. Calibre 8806 and 55 hours are genuine-reference specifications. Ask for the sample movement disclosure, service route, several timing positions and a full measured reserve cycle.
What should be checked on the mesh bracelet and folding clasp?
Request film-free close-ups of the mesh edges, end links, adjustment holes/fasteners, clasp arms and lock surfaces. Then record fit to wrist, repeated opening/closing, adjustment range, pull security and sharp-edge inspection on the exact watch. Visible hardware alone cannot establish durability.
Was the retained product video watched for this rewrite?
No. The 14,461,997-byte MP4 remains attached and passed HTTP Range delivery with status 206. Every claim in this draft comes from the ten inspected still photographs. Request a new continuous exact-unit clip for controls, bracelet, spare-strap installation, measurements and testing.