No-date dial · orange details · mesh bracelet
Omega Seamaster Diver 300M 210.30.42.20.01.018 Replica Watch
This Omega Seamaster replica follows the black-and-orange no-date direction of reference 210.30.42.20.01.018. Ten still photos show the dial, bezel, two case sides, mesh bracelet, clasp, transparent decorated back, 13.7 mm calliper state, immediate lume and 150.9 g scale state. The retained video was not watched.
The identity aligns, but the test record is incomplete
The photos match the official design direction well. They still do not establish sample diameter, movement identity, multi-position timing, reserve, materials or pressure resistance. Fresh exact-unit QC should close those gaps.
Evidence boundary
OMEGA's official specifications describe the genuine reference. The still photographs describe this sample. Similar appearance or close measurements do not prove authenticity or construction.
Official genuine context
42 mm · 13.80 mm · about 155 g
OMEGA lists 49.70 mm lug-to-lug, 20 mm between lugs, Calibre 8806 and 55 hours for the genuine reference.
Pictured sample
13.7 mm · 150.9 g
Both are single protected-watch photo states. Film, bracelet sizing, zeroing and repeatability remain part of final QC.
Missing sample test
No timegrapher photo
Do not copy a nearby watch's result. Request several positions, machine settings and a later-reserve repeat for this exact unit.
An omega seamaster super clone comparison becomes useful when the no-date dial, mesh bracelet, dimensions, movement disclosure and performance data all belong to the same physical watch.
Six supporting photo groups
Case Controls, Mesh Hardware and Transparent Back
The remaining stills make the configuration clearer while keeping mechanical and material claims separate.
Helium-valve-side profile
The left control, polished and brushed case transitions, bezel edge and mesh attachment are visible. Threading, function, sealing and case material are not established.
Crown-side profile
The crown, guards, layered case and bezel profile can be compared. Still images do not show winding, time setting, water sealing or long-term crown-tube condition.
Mesh sizing hardware
The protected logo-style clasp exterior and a mesh section with several reinforced holes are visible. Confirm the correct attachment point, sizing range and every fastener in exact-unit QC.
Open foldover clasp
Folding blades, hinge points and brushed surfaces are shown. Final QC should repeat opening and closure, show positive engagement and confirm the sized bracelet remains secure.
Movement-style and identifier view
Decoration, 8806-style rotor text and Z019264 HIG 59-style marks can be matched visually. They do not identify the calibre, origin, serviceability or ownership history.
Full mesh-bracelet layout
The complete watch, long mesh sections, adjustment holes and clasp are visible in one frame. Wrist fit and final bracelet length still need buyer-specific confirmation.
Model-linked media retained
Native MP4 Retained Without Borrowing Unseen Claims
The 42,129,274-byte MP4 passed HTTP Range delivery with status 206. It was not watched, so it contributes no evidence for bezel action, crown feel, mesh-clasp operation, movement, timing, lume decay or water resistance. Use a fresh exact-unit clip for those checks.
Photo-based evidence chain
What the Archive Shows and What Final QC Must Add
Confirmed by still photos
Black no-date dial, orange accents, black diving bezel, steel-tone case and mesh bracelet, both case controls, foldover clasp, transparent decorated back, 13.7 mm calliper state, 150.9 g scale state and immediate lume.
Not confirmed
Factory, origin, alloys, aluminium, sapphire, 42 mm sample diameter, lug-to-lug, Calibre 8806, certification, 55-hour reserve, timing, pressure resistance, lume endurance or clasp durability.
Best next request
One cut-free exact-unit sequence with film removed: dial and identifiers, bezel, crown and valve, back, bracelet sizing and clasp, full dimensions, weight, movement disclosure, multi-position timing, reserve, lume and agreed pressure test.
Omega replica watch buyer guide
210.30.42.20.01.018: No-Date Dial, Mesh Bracelet, Size and QC
The page reference and still-photo design are consistent
Reference 210.30.42.20.01.018 points to the current black and orange no-date Diver 300M direction. The sample shows the same broad visual language: black face and bezel, orange seconds/quarter-marker/wordmark details, steel-tone case, mesh bracelet and transparent back. This alignment reduces identity ambiguity but does not authenticate the watch.
Use the official specification as a target, not a sample certificate
The OMEGA reference page lists 42 mm diameter, 49.70 mm lug-to-lug, 13.80 mm thickness, 20 mm between lugs and approximately 155 g. It also describes a black aluminium dial/bezel, steel case and mesh bracelet, domed sapphire, Calibre 8806, 55 hours and 30 bar for the genuine watch only.
No-date construction is a buyer-facing difference
Many familiar Diver 300M pages place a date window at 6. This configuration does not. The cleaner lower dial, orange minute-track accents and mesh bracelet change both appearance and the QC checklist. Confirm the exact no-date dial rather than accepting a date-equipped substitute that merely shares a black bezel.
The orange details should be checked as one coordinated set
The central seconds hand, four quarter-index borders and Seamaster script show orange colour in the supplied photos. Check hue consistency, paint edges, print position and hand clearance in the same lighting. Camera white balance can shift colour, so final QC should include neutral light and a head-on view.
The sample thickness reads about 13.7 mm
One calliper photo shows about 13.7 mm across the side profile. Omega lists 13.80 mm for the genuine reference, a visually close value. The sample frame does not prove zeroing, repeatability or film-free measurement. Ask for two readings at the same defined points with the tool closed to zero first.
The 150.9 g scale result needs setup context
The complete protected sample on its mesh bracelet reads about 150.9 g. Omega's approximately 155 g is a genuine-product figure. Before comparing comfort, request film-free weight, final bracelet length and scale-zero evidence. A close number cannot establish steel grade, movement architecture or authenticity.
Mesh construction changes the fit conversation
The bracelet uses tightly woven steel-tone links with reinforced adjustment holes and a foldover-style clasp. Ask which holes or fasteners set length, the minimum and maximum wrist range, whether excess mesh is retained, and how the clasp sits under the wrist. Final QC should show the buyer's requested sizing.
The clasp needs a mechanical demonstration
Photos reveal the exterior plate, interior folding blades, hinge geometry and protective film. They do not show resistance, latch engagement or repeated reliability. One continuous clip should open and close the clasp several times, tug the secured bracelet gently and show that sharp edges or loose mesh do not interfere.
The aluminium, sapphire and steel claims belong to the genuine reference
OMEGA describes black aluminium for the genuine dial and bezel, a steel case/bracelet and a domed scratch-resistant sapphire crystal with internal anti-reflective treatment. The sample's black surfaces, reflections and stainless-steel-style text are appearance evidence. Ask the seller to disclose actual sample materials separately.
The decorated back does not identify the installed calibre
An automatic-looking decorated movement is visible, along with OMEGA MASTER CO-AXIAL 8806-style text. The genuine reference uses Calibre 8806, but the sample needs its own movement name, service expectations, beat rate and reserve test. Decorative similarity should not substitute for that disclosure.
The still set contains no timing record
Unlike some nearby pages, these ten photographs do not include a timegrapher screen. Do not borrow another watch's rate, amplitude or beat error. Request a fully wound several-position record with machine settings visible, then repeat later in the reserve to show how the exact unit changes.
Immediate lume and long-term lume are different questions
The directed-light photo shows bright blue to green-blue activation on the main hands, indexes and bezel pip. A high quality omega replica watches comparison should repeat the same exposure immediately after charging and at one, five and fifteen minutes. That reveals decay and uneven plots without relying on one dramatic image.
300m / 1000ft text is not a pressure test
OMEGA lists 30 bar for the genuine model. The replica photographs show the familiar depth text but no test result. If a buyer reaches this page through a waterproof replica-watch search, the order should specify the intended use, agreed pressure test and written limitations before exposure to water.
Search labels are useful only when they lead to model evidence
omega copy watch, omega super clone, omega seamaster super clone, omega seamaster replica and high quality omega replica watches are real search phrases from the supplied workbook. On this page they lead to exact-reference facts, visible sample details, missing tests and a specific order checklist rather than unsupported quality claims.
The product video stays available without adding unseen claims
The 42,129,274-byte MP4 passed HTTP byte-range delivery with status 206. It was not watched. The draft therefore does not infer bezel clicks, winding feel, movement sound, clasp operation or wrist behaviour from unseen footage. Request a fresh exact-unit video if those checks matter.
Compare three related pages by dial and wearing direction
Choose the standard black/date Diver 300M listing when a date and conventional bracelet matter. The green Diver 300M listing changes the colour identity, while the 007 limited-edition-style listing adds themed details and a photographed two-strap direction. Each page needs independent media verification.
Write the final order around one exact watch
Record the no-date black/orange dial, bezel, mesh bracelet, clasp, current price and wrist-size request first. Then add film-free diameter, lug-to-lug, thickness and weight; installed movement; crown and bezel operation; multi-position timing; reserve; lume; and any agreed pressure test. Match every result to the same serial-style marks before balance approval.
Related Omega Seamaster comparisons
Three Diver 300M Alternatives with Clear Differences
Compare date layout, colour and themed detailing before deciding which configuration to request.
Date-equipped black direction
Seamaster 210.30.42.20.01.001
Choose this listing when a 6 o'clock date and conventional bracelet direction matter more than the current no-date dial and mesh construction. Check its own media identity carefully.
Green colour alternative
Seamaster 210.30.42.20.10.001
The green-dial and green-bezel direction changes the colour identity while keeping a 42 mm-class Diver 300M format. Verify the linked sample independently.
Themed two-wearing-option direction
Seamaster 210.22.42.20.01.004
Use the 007 limited-edition-style page when themed dial/clasp details and photographed steel/rubber wearing options are the priority.
How Time-mimic Should Handle Your 210.30.42.20.01.018 Inquiry
The reference direction is clear. The remaining work is to connect materials, measurements, function and performance evidence to the exact physical watch being shipped.
1 · Lock the visible configuration
Record no-date black/orange dial, bezel, mesh bracelet, clasp, wrist-size request, packaging and current US$597 price.
2 · Identify one exact unit
Match dial, back, Z019264 HIG 59-style marks and bracelet hardware continuously before recording any result.
3 · Measure and test it
Repeat film-free dimensions and weight, controls, clasp, movement disclosure, multi-position timing, reserve, lume and agreed pressure test.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for movement, crown, bezel, valve, mesh bracelet, clasp and any agreed pressure-test result.
Flexible options
Deposit, QC & Final Payment
After the configuration, sample specifications and requested tests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm exact reference, no-date dial, mesh bracelet and wrist sizing
- 2. Confirm US$597 and pay US$20 deposit to start sourcing/QC
- 3. Review film-free measurements, weight, controls, movement, timing, reserve, lume and requested tests
- 4. Pay balance only after exact-unit approval; then shipment begins
No-date dial, mesh fit, dimensions, movement and order questions
Omega Seamaster 210.30.42.20.01.018 Replica Watch FAQ
Does the photographed watch match reference 210.30.42.20.01.018?
The visible direction is consistent: black no-date dial, orange details, black diving bezel, steel-tone case, mesh-bracelet construction, helium-valve-style control and transparent back. That supports model comparison, but photographs still cannot authenticate the sample or prove its movement and materials.
What is distinctive about this no-date Seamaster layout?
There is no date window. The dial uses white round and rectangular luminous-style plots, orange outlines at the quarter markers, orange Seamaster text and an orange central-seconds detail. The mesh bracelet also separates this direction from the familiar date-equipped five-link-style Diver 300M pages.
Does the calliper prove the replica is exactly 13.80 mm thick?
The sample calliper reads about 13.7 mm in one frame. Omega lists 13.80 mm for the genuine watch. The close readings are useful comparison points, but zeroing, repeat measurement and film removal are not documented, so they do not prove identical construction.
How should the 150.9 g sample weight be compared with Omega's 155 g figure?
Treat both as context. The protected sample on its mesh bracelet reads about 150.9 g, while Omega lists approximately 155 g for the genuine reference. Film, bracelet length, scale setup and internal construction can change the result. Similarity cannot prove material or authenticity.
What can be checked on the mesh bracelet and clasp?
The photos show the mesh pattern, end connections, adjustment-hole section, folding blades and logo-style exterior. Final QC should demonstrate wrist sizing, pin or fastener security, repeated closure, foldover engagement and comfort on the buyer's requested wrist size.
Do the back markings prove Calibre 8806?
No. A decorated automatic-looking movement and an 8806-style inscription are visible through the transparent back. Omega identifies Calibre 8806 for the genuine reference, but the sample needs an installed-movement disclosure, service expectations, beat-rate record and timed reserve test of its own.
What does the lume photograph confirm?
It confirms an immediate blue to green-blue response on the hands, hour markers and bezel pip after directed light. It does not show decay time or equal camera exposure. Ask for repeat frames immediately after charging and at one, five and fifteen minutes.
Is the replica proven water resistant to 300 metres?
No. The sample shows 300m / 1000ft-style text, but the still set contains no pressure test. Omega's 30 bar rating applies to the genuine reference. Agree on an exact-unit test and written use guidance before any water exposure.
Was the attached product video watched for this rewrite?
No. The MP4 remains attached and passed a 206 byte-range delivery check, but it was not watched. All visual descriptions come from the ten inspected still photographs. Request a fresh continuous exact-unit clip for functions and final approval.
What should be recorded before paying the balance?
Record reference 210.30.42.20.01.018, no-date black/orange dial, bezel, mesh bracelet and clasp, film-free dimensions and weight, installed movement, crown and bezel operation, several-position timing, reserve, lume, pressure-test request, current US$597 price, warranty and delivery terms.