James Bond Limited Edition direction · photo-led evidence
Omega Seamaster Diver 300M 210.22.42.20.01.004 Replica Watch
This Omega Seamaster 007 replica page documents a black gun-barrel-style dial, crest-style detail, gold-tone accents, steel-tone bracelet, separate black rubber-style strap, transparent decorated back and engraved 007 clasp. Ten still photographs support the description; the retained video was not watched.
Compare wearing options before comparing weight
The sample reads about 195.9 g on a protected steel bracelet. Omega's official approximately 111 g figure is for the genuine watch on rubber, so it is not a like-for-like difference. Request film-free weights for both exact-unit configurations.
Official genuine context
42 mm · 13.56 mm · rubber strap
Omega lists 49.90 mm lug-to-lug, about 111 g and Calibre 8800 with 55 hours for the genuine rubber-strap reference.
Pictured sample
195.9 g on steel bracelet
Protective film remains and link count is not stated. Measure the same replica on both wearing options before comparing comfort.
One timing state
+13 s/day · 299° · 0.1 ms
The screen also shows 28,800. Request a fully wound several-position test; do not infer movement identity from one display.
For an omega super clone or omega seamaster replica comparison, the useful question is not which label sounds strongest. It is whether the exact watch, both strap systems, dimensions, movement disclosure and performance record are connected in one verifiable QC set.
Six supporting photo groups
Strap, Valve and Clasp Details the Hero Grid Cannot Explain Alone
The additional stills make the configuration richer while keeping every limit visible.
Two wearing directions in one frame
The watch is fitted to a protected steel-tone bracelet while a separate black rubber-style strap, pin buckle and spring bar sit alongside it. The order still needs an exact contents list.
Separate rubber-style option
Front surfaces, strap holes, keepers, pin buckle and spring bar are visible. Compound, length, fit range and guaranteed inclusion are not established by this image.
Marks are not material tests
Logo, size and code-style moulding plus stainless-steel-style buckle text can support QC matching. They do not prove origin, rubber formulation or alloy.
Helium-valve-side profile
The projecting control, polished and brushed case transitions and protected bracelet are visible. Function, threading, sealing and case metal remain untested.
007-themed clasp exterior
The clasp exterior carries Omega, 007 and On Her Majesty's Secret Service-style engraving. Alignment and finish can be compared; authenticity and included-edition status cannot.
Open clasp construction
The folding blades, hinge points and mixed brushed/polished surfaces are visible. Fresh QC should show opening, closure, security and any adjustment with the exact unit.
Model-matched media retained
Keep the Native Video, but Base This Draft on the Ten Stills
The 37,106,040-byte MP4 passed HTTP Range delivery with status 206. It was not watched, so it contributes no claims about movement, functions, strap change, timing or water resistance. A fresh continuous exact-unit clip should replace those unknowns before approval.
Photo-based evidence chain
What the Archive Confirms—and What Still Needs Exact-Unit QC
All visual statements come from ten original still images. Genuine-reference values come only from Omega's official product sheet.
Confirmed by still photos
Black 007-themed dial/bezel direction, steel-tone bracelet, separate rubber-style strap and buckle, helium-valve-style control, transparent decorated back, engraved folding clasp, about 195.9 g scale state and one timing screen.
Not confirmed
Factory, origin, alloys, crystal, exact dimensions, Calibre 8800, 55-hour reserve, certification, magnetic resistance, pressure resistance, lume duration, strap fit, inclusion of both options or multi-position stability.
Best next request
One cut-free exact-unit QC sequence with film removed: dial/date/bezel, crown and valve, back and identifiers, both wearing options, dimensions, two weights, movement disclosure, several-position timing, lume and any agreed pressure test.
Omega replica watch buyer guide
Seamaster 210.22.42.20.01.004: 007 Design, Two Straps, Weight and QC
The reference and the photographed design point in the same direction
The page uses 210.22.42.20.01.004, and Omega's official product sheet identifies the genuine reference as a James Bond Limited Edition Seamaster Diver 300M. The sample also shows the associated 007-themed direction: black gun-barrel-style dial, crest-style detail, gold-tone accents and engraved clasp. This consistency is useful comparison evidence, not authentication.
Use the genuine 42 mm dimensions as a comparison target only
The Omega product sheet lists 42 mm diameter, 49.90 mm lug-to-lug, 13.56 mm thickness and 20 mm between lugs. No sample calliper images are supplied, so this replica's dimensions remain unknown until a zeroed, film-free exact-unit measurement is shown.
The 195.9 g scale photo is useful but not a like-for-like official comparison
The pictured replica is weighed on a steel bracelet and reads about 195.9 g with protective film. Omega's approximately 111 g official figure describes the genuine watch on its specified black rubber strap. The bracelet, film and link count change the comparison. Ask for two sample weights: complete on rubber and complete on the sized steel bracelet.
The black dial carries recognisable Bond storytelling
A gun-barrel-style spiral, crest-style emblem at 12, red 50 detail near 10, gold-tone central hands and red-tipped seconds hand make this configuration distinct from a standard black Seamaster Diver 300M. Review the straight-on photograph for print spacing, marker alignment, hand clearance, date centring and bezel-to-dial alignment.
The date window needs the special numeral demonstrated, not assumed
Photo 4 shows date 10 at 6. The genuine limited-edition design is associated with a stylised 7, but that numeral is not visible in the supplied stills. Fresh QC should advance the date through 6, 7 and 8 in one continuous clip so the font, centring and changeover can be checked.
The bezel and helium-valve-style control require functional proof
The glossy black minute-scale bezel and left-side projecting control create the Diver 300M silhouette. Photos do not show bezel direction, click consistency, zero return, valve threading or sealing. Ask for one cut-free sequence that operates each part and returns to the aligned dial view.
Steel-tone surfaces and stainless-steel-style text remain appearance evidence
The case, bracelet and folding clasp show polished and brushed steel-tone surfaces, while the strap buckle and caseback carry stainless-steel-style wording. Neither colour nor engraving proves an alloy. Record case, bezel, back, bracelet, clasp and pin-buckle materials as separate line items.
The supplied rubber-style strap should be treated as a configuration choice
The loose strap halves, keepers, pin buckle and spring bar are photographed from both sides. Confirm wrist range, hole spacing, buckle width, strap-to-case fit, included spring bars and whether changing between rubber and steel is covered by the final QC and shipment contents.
The decorated transparent back does not prove Calibre 8800
The back exposes an automatic-looking decorated movement with a dark crest-style central element and limited-edition-style ring text. Omega lists Calibre 8800 and a 55-hour reserve for the genuine reference. The sample needs its installed movement name, service expectations, timed reserve and multi-position performance recorded independently.
One +13 s/day screen is a snapshot, not a guarantee
The visible display reads +13 s/day, 299 degrees, 0.1 ms and 28,800 in one state. A buyer should ask for a fully wound test across several positions and later in the reserve, with machine settings visible. A single favourable amplitude or beat-error value cannot cancel an unverified movement identity or future drift.
Diver 300M markings are not a replica pressure rating
The dial and back show 300m / 1000ft-style wording, while Omega assigns the genuine watch a 30 bar / 300 m rating. The sample archive contains no pressure test. Searches for a waterproof replica watch must lead to this distinction: specify an agreed test and do not promise swimming or diving use from printed text.
Sapphire, anti-magnetism and Master Chronometer are genuine-reference facts
Omega's official sheet lists a domed scratch-resistant sapphire crystal, Master Chronometer certification and anti-magnetic genuine-watch context. The photographs cannot establish crystal composition, coating, magnetic resistance or certification for the replica. Request sample-specific disclosure and testing where those properties matter.
The 007 clasp engraving needs both visual and mechanical QC
The exterior engraving makes the steel-bracelet option visually distinctive, while the open-clasp photo exposes the folding architecture. Check text depth and alignment, then ask to see repeated opening and closure, safety engagement, link screws or pins, sizing and wrist fit without protective film.
No lume sequence is available
The dial uses luminous-style hands and markers, but the ten stills contain no dark-room charge-and-decay sequence. A high quality omega replica watches comparison should show initial colour and brightness, then repeat at one, five and fifteen minutes under the same exposure rather than relying on the printed appearance.
The attached video is retained but contributes no unseen facts
The model-matched MP4 remains in the page and passed HTTP byte-range delivery, but it was not watched. The copy therefore relies only on visible still-photo evidence. Ask for a fresh exact-unit clip that connects the dial, serial-style marks, back, both wearing options, functions and final timing without cuts.
Search phrases should open a useful comparison, not hide uncertainty
Buyers may search omega copy watch, omega super clone, omega seamaster super clone, omega seamaster replica or high quality omega replica watches. These phrases belong in an evidence-led guide: match the exact reference, separate genuine specifications from sample facts, state what is missing and require written QC before payment.
Choose the related model by dial, theme and everyday versatility
Compare the standard black steel Diver 300M when you want the closest non-007 look. Move to the white-dial Diver 300M for stronger contrast, or the green Diver 300M for a clear colour change. Verify each linked sample on its own page.
Related Omega Seamaster comparisons
Three Diver 300M Alternatives with Clear Buyer Roles
Keep the 42 mm-class dive-watch direction while changing theme or dial colour.
Closest non-007 alternative
Seamaster 210.30.42.20.01.001
Choose the standard black steel-bracelet Diver 300M direction when you like the black sports-watch palette but do not need the crest, gun-barrel motif or 007 clasp storytelling. Verify its separate media before carrying over any sample fact.
Higher-contrast dial
Seamaster 210.30.42.20.04.001
The white-dial listing changes the face more strongly while retaining a steel-bracelet Diver 300M silhouette. It suits buyers who prioritise dial contrast and easier visual separation from the black bezel.
Stronger colour change
Seamaster 210.30.42.20.10.001
Move to the green-dial and green-bezel direction when colour identity matters more than Bond-specific detailing. Compare its own dimensions, movement disclosure, timing and QC rather than assuming equivalence.
How Time-mimic Should Handle Your 210.22.42.20.01.004 Inquiry
The photographs establish a strong 007 limited-edition design direction. The order process must turn the remaining unknowns into written, exact-unit evidence.
1 · Define the complete set
Record reference, dial/bezel details, steel bracelet, rubber strap, both closures, spring bars, sizing, packaging and current US$567 price.
2 · Connect one exact unit
Show dial and identifiers, date 7, bezel, crown, valve, back, movement disclosure, strap change and clasp operation continuously.
3 · Measure and test it
Repeat film-free dimensions, rubber and steel weights, multi-position timing, reserve, lume and only the agreed pressure test before balance approval.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for movement, crown, date, bezel, valve, bracelet, rubber strap, both closures and any agreed pressure result.
Flexible options
Deposit, QC & Final Payment
After the complete two-strap configuration, sample specifications and test requests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm the exact 007-themed configuration and included parts
- 2. Confirm US$567 and pay US$20 deposit to start sourcing/QC
- 3. Review dimensions, both weights, functions, movement, timing, lume and requested tests
- 4. Pay balance only after approval; then shipment begins
Identity, two-strap set, weight, movement and order questions
Omega Seamaster 210.22.42.20.01.004 Replica Watch FAQ
What is confirmed about this Omega Seamaster 007 replica sample?
The ten photos confirm a black gun-barrel-style dial, crest-style detail at 12, date at 6, black diving bezel, helium-valve-style control, steel-tone bracelet, transparent decorated back and 007-themed clasp. They also show a separate black rubber-style strap and pin buckle. They do not prove authenticity, factory, calibre, materials or pressure resistance.
Is 210.22.42.20.01.004 a real Omega reference?
Yes. Omega's official product sheet identifies genuine 210.22.42.20.01.004 as a James Bond Limited Edition Seamaster Diver 300M, limited to 7,007 pieces. That confirms the genuine comparison identity only; it does not authenticate this replica sample or its edition-style markings.
Does the replica have the genuine watch's 42 mm dimensions?
That is not confirmed. The archive contains no calliper photos. Omega lists 42 mm diameter, 49.90 mm lug-to-lug and 13.56 mm thickness for the genuine watch, but the replica needs separate film-free measurements of diameter, crown width, lug-to-lug and thickness.
Why does the photographed weight differ so much from the official 111 g figure?
The sample reads about 195.9 g on a steel bracelet with protective film, while Omega's approximately 111 g figure is for the genuine rubber-strap configuration. This is not a like-for-like comparison. Ask for exact-unit weights on the rubber and steel options with film removed and link count stated.
Are both the steel bracelet and rubber strap included?
The photos place the watch on a steel bracelet and separately show black rubber-style strap halves, a pin buckle and a spring bar. A photograph does not guarantee the shipping set. List both wearing options and every piece of hardware in the written order summary and final QC.
What does the timegrapher screen show?
One screen reads +13 seconds per day, 299 degrees, 0.1 milliseconds and 28,800. These are one visible machine state, not a multi-position performance record. They do not identify Calibre 8800, prove Master Chronometer performance or predict long-term accuracy.
Does 300m / 1000ft text make this replica safe for diving?
No. The dial and back markings are appearance evidence, not a pressure test. Omega's 30 bar / 300 m rating applies to the genuine reference. Keep the replica away from water unless the exact unit passes an agreed test and the seller gives written use guidance.
Do the caseback and buckle markings prove genuine materials or limited-edition status?
No. The photographs show stainless-steel-style, limited-edition and 007 engravings, plus movement decoration. Markings cannot independently prove alloy, calibre, authenticity, production allocation or provenance. Record actual construction and movement identity separately.
Was the attached product video used to write this page?
No. The MP4 remains attached and passed a byte-range delivery check, but it was not watched. All visual statements on this page come from the ten still photographs. Request a fresh continuous exact-unit QC clip for functions, strap change and final identity.
What should be confirmed before the balance is paid?
Confirm reference, dial and bezel details, steel and rubber options, included hardware, film-free dimensions and weights, installed movement, crown/date/bezel operation, several-position timing, lume, pressure-test request, current US$567 price, warranty and delivery terms. Pay the balance only after exact-unit QC approval.