Diver 300M · photo-led identity check
Omega Seamaster Diver 300M 210.30.42.20.01.001 Replica Watch
This page is named for the black-dial 210.30.42.20.01.001, but the supplied product photographs show a green wave dial and green bezel. The green sample visually aligns more closely with 210.30.42.20.10.001. This difference is disclosed before any size, movement or quality comparison.
Important model-photo mismatch
Do not approve this as the black reference from these photos. Request black exact-unit media, or have the written order corrected to the green reference direction before paying the balance.
Evidence rule
Official Omega specifications describe genuine comparison watches. Photographs describe this sample. Neither source automatically proves the other.
Published black genuine context
42 mm · 49.90 mm lug-to-lug · 194 g
Omega lists a black dial, 13.56 mm thickness, 20 mm between lugs, Calibre 8800 and a 55-hour reserve for genuine 210.30.42.20.01.001.
Photographed green direction
Green dial/bezel · 196.5 g
The sample colour matches the green family more closely. The scale includes bracelet and protective film; material and exact reference remain unproved.
One timing state
+6 s/day · 286° · 0.3 ms
The screen also shows 28,800. Request a fully wound several-position test and do not infer calibre from one display.
For an omega super clone or omega seamaster replica comparison, begin with the identity conflict. A detailed test record cannot rescue a sample attached to the wrong colour reference unless the order itself is corrected.
Six supporting photo groups
Strap, Profile, Lume and Caseback Evidence
These six views complete the ten-photo record without turning visible marks into unverified specifications.
The complete photographed set
The watch is fitted to a protected steel-tone bracelet. Separate green rubber-style strap halves, a pin buckle and a spring bar appear alongside it; written confirmation is still required for inclusion.
Green strap front
The colour, holes, keepers, pin buckle and spring bar are visible. Length, compound, wrist range, lug fit and the final shipping set are not established by the photograph.
Strap and buckle underside
Omega-, 20-, HF- and code-style moulding plus stainless-steel-style buckle text can be compared in QC. Markings do not prove origin, compound or alloy.
Case and control profile
The side view shows case transitions, bracelet fit and a protected control area. Thickness, threading, sealing, metal and functional condition require separate evidence.
Immediate luminous response
Hands, hour plots and bezel pip respond blue to green-blue after directed light. No timed decay sequence is supplied, so duration and uniformity remain unknown.
Transparent decorated back
A rotor and bridge decoration plus 8800-, Diver 300M- and 300m-style text are visible. Decoration and inscriptions cannot identify the movement or prove pressure resistance.
Model-linked media retained
Native MP4 Kept, but Not Used as Unseen Evidence
The 32,697,217-byte MP4 passed HTTP Range delivery with status 206. It was not watched, so it contributes no claims about dial identity, functions, movement, timing, lume or water resistance. A new continuous clip should resolve the reference before approval.
Evidence chain
What Is Confirmed, What Conflicts and What Still Needs QC
Confirmed by still photos
Green wave dial and bezel, date at 6, steel-tone bracelet, separate green rubber-style strap and buckle, left control, decorated transparent back, immediate lume, about 42.0 mm shown span, 196.5 g scale state and one timing screen.
Direct conflict
The published reference is officially black, but the sample is green. It visually matches 210.30.42.20.10.001 more closely. Identity must be resolved before treating any photo as evidence for the named black reference.
Not confirmed
Factory, origin, alloys, ceramic, sapphire, exact case-only dimensions, Calibre 8800, certification, 55-hour reserve, pressure resistance, lume endurance, inclusion of both wearing options or multi-position stability.
Omega replica watch buyer guide
210.30.42.20.01.001: Reference Check, Green Sample, Measurements and QC
Resolve the black-title and green-photo mismatch first
The page name points to 210.30.42.20.01.001, which Omega officially identifies with a black dial. Every supplied watch photograph instead shows a green wave dial and green bezel. The closest genuine visual/reference match is 210.30.42.20.10.001. A buyer should pause reference comparison until the seller either supplies black exact-unit media or changes the order identity to green.
Use both Omega pages as separate comparison anchors
The Omega black-reference page lists 42 mm diameter, 49.90 mm lug-to-lug, 13.56 mm thickness, 20 mm between lugs and about 194 g. The Omega green-reference page lists 42 mm, 49.93 mm, 13.56 mm, 20 mm and about 198 g. These genuine facts clarify identity but never authenticate the sample.
Read the 42.0 mm calliper frame conservatively
The display is legible, yet jaw placement appears to include a broad front or crown-side span rather than an isolated case body. The honest description is photographed span about 42.0 mm. Fresh QC should show a zeroed calliper, case diameter excluding crown, maximum width including controls, lug-to-lug, thickness and lug opening in separate frames.
A 196.5 g photo is useful evidence, not a material certificate
The complete watch on its protected steel bracelet reads about 196.5 g. That sits between Omega's approximate genuine figures for the black and green steel-bracelet references, but similar weight cannot prove steel grade, internal construction, reference or authenticity. Ask for film-free weight with bracelet link count and scale zero visible.
The green wave dial is the main visual identifier
The straight-on image shows a green wave-pattern face, white raised-looking markers, skeletonised-looking hands, a date window at 6 and an orange/red-tipped seconds hand. Review marker alignment, print spacing, hand clearance, date centring, dial-to-rehaut relationship and bezel zero in the same head-on frame.
ZrO2-style text describes a visible mark only
A ZrO2-style inscription is visible on the dial, and the bezel has a glossy green insert. Neither visual cue establishes zirconium-oxide ceramic composition. If material matters, the order summary should name the actual sample bezel insert and crystal, with seller disclosure separated from Omega's genuine specifications.
The crown and helium-valve-style control need motion evidence
The classic Diver 300M silhouette includes a guarded right-side crown and a projecting control at the left side of the case. Still photographs cannot show threading, winding, time setting, date change, valve operation or sealing. Request one cut-free clip that operates each control and returns to the aligned dial view.
The loose green strap creates a second wearing option only if included
The front and underside photos show two strap halves, keepers, a pin buckle and spring bar. Record strap length, width, buckle width, wrist range, attachment hardware and whether a tool is included. Final QC should show the exact strap fitting the exact case rather than assuming compatibility from a flat-lay image.
The transparent back gives visual access, not calibre proof
The caseback exposes an automatic-looking decorated movement with an 8800-style rotor inscription. Omega uses genuine Calibre 8800 and lists a 55-hour reserve for both cited genuine references, but the sample decoration does not establish calibre. Ask for the installed movement name, beat rate, service expectations and a timed reserve test in writing.
Interpret +6 s/day as one recorded machine state
The screen shows +6 s/day, 286 degrees, 0.3 ms and 28,800, with recent rows varying. This is not the same as a multi-position, fully wound evaluation. Request dial-up, dial-down, crown-up and additional positions at the start and later in the reserve, with machine lift angle and beat-rate settings visible.
The lume photo confirms activation but not endurance
The directed-light frame shows an immediate blue to green-blue response on hands, plots and bezel pip. It does not document darkness, exposure settings or decay. Compare a controlled sequence immediately after charging and at one, five and fifteen minutes, using the same camera exposure for every frame.
Do not turn 300m / 1000ft-style text into a swimming promise
Omega lists 30 bar / 300 m for the genuine references. The replica archive contains no pressure-test result, and dial or back text is not a test. For any waterproof replica watch request, agree on a relevant pressure test for the exact unit and keep it away from water unless written guidance supports the intended use.
Search labels should lead to evidence
Terms such as omega copy watch, omega super clone, omega seamaster super clone, omega seamaster replica and high quality omega replica watches express buyer intent. They do not establish grade, factory, movement or reliability. A useful product page connects those searches to photos, measurements, limitations and an exact-unit approval process.
The retained MP4 is available, but this draft does not borrow unseen claims
The 32,697,217-byte product video passed an HTTP Range request with status 206 and stays attached below. It was not watched. The writing relies only on the ten stills, so no function, sound, motion, movement or wrist-behaviour statement has been inferred from the video.
Choose the related page by the question you need answered
The green 210.30.42.20.10.001 listing is the most important comparison because it matches the photographed colour direction. The white-dial 210.30.42.20.04.001 listing offers clearer contrast, while the black/orange 210.30.42.20.01.018 listing stays closer to the black family named in this URL. Each linked sample needs its own evidence review.
Build the inquiry around an identity decision
State either black 210.30.42.20.01.001 with replacement black QC media, or green 210.30.42.20.10.001-style with the photographed green set. Then record bracelet and strap contents, dimensions, weight, movement disclosure, functions, timing, lume, pressure-test request, price, warranty and shipping before the deposit.
Related Omega Seamaster comparisons
Three Diver 300M Pages with Different Buyer Roles
Use the first link to resolve the current colour mismatch, then compare two visibly different alternatives.
Closest match to these photos
Green Seamaster 210.30.42.20.10.001
Start here because the green dial and bezel correspond to the supplied sample direction. Compare that page's own media and exact-unit QC before moving the order identity.
Higher dial contrast
White Seamaster 210.30.42.20.04.001
The white-dial listing provides a clearer visual break from the current green set while keeping the steel-bracelet Diver 300M format.
Black-family alternative
Black/Orange Seamaster 210.30.42.20.01.018
Use the black/orange listing when a dark dial family is more important than matching these green photographs. Verify its details independently.
How Time-mimic Should Handle This Seamaster Inquiry
The ten photos give useful green-sample evidence. The order process must resolve the black title before turning that evidence into a purchase decision.
1 · Resolve the reference
Choose black 210.30.42.20.01.001 with corrected black media, or green 210.30.42.20.10.001-style with the matching green sample.
2 · Define the complete set
Record steel bracelet, green strap, buckle, spring bars, sizing, packaging, current US$567 price, warranty and delivery.
3 · Test one exact unit
Repeat film-free measurements and weight, controls, date, bezel, movement disclosure, several-position timing, lume and agreed pressure test.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for the chosen dial/reference, movement, crown, date, bezel, valve, bracelet, strap and any agreed pressure-test result.
Flexible options
Deposit, QC & Final Payment
After the black-or-green identity decision, included parts and test requests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm black 210.30.42.20.01.001 or green 210.30.42.20.10.001-style
- 2. Confirm US$567 and pay US$20 deposit to start sourcing/QC
- 3. Review included parts, dimensions, weight, functions, movement, timing, lume and requested tests
- 4. Pay balance only after exact-unit approval; then shipment begins
Identity, photo evidence, measurements, movement and order questions
Omega Seamaster 210.30.42.20.01.001 Replica Watch FAQ
Which reference does this product page name?
The title and URL name Omega Seamaster Diver 300M reference 210.30.42.20.01.001. Omega's official page describes that genuine reference as a black-dial, steel-bracelet watch. The supplied product photos are green, so the photographed sample should not be approved as the black reference without corrected exact-unit QC.
Why do the green photos not match 210.30.42.20.01.001?
Omega identifies 210.30.42.20.01.001 with a black dial, while the photographed green dial and bezel visually align much more closely with genuine reference 210.30.42.20.10.001. This page keeps both identities visible so the buyer can request either corrected media or a corrected order reference.
What do the ten product photos actually confirm?
They confirm a green wave-pattern dial and green minute bezel, date at 6, steel-tone case and bracelet, left helium-valve-style control, separate green rubber-style strap and pin buckle, immediate luminous response, a transparent decorated back, one calliper reading, one scale reading and one timegrapher screen.
Does the calliper prove a 42 mm replica case diameter?
No. The screen reads about 42.0 mm, but the jaws appear to span a broad front or crown-side area. Treat it as the photographed span, not a controlled case-only diameter. Request zeroed measurements of case excluding crown, crown width, lug-to-lug and thickness with protective film removed.
How does the photographed 196.5 g compare with Omega's figures?
The complete protected sample on a steel bracelet reads about 196.5 g. Omega lists approximately 194 g for genuine black reference 210.30.42.20.01.001 and approximately 198 g for genuine green reference 210.30.42.20.10.001. Similarity does not prove material, reference or authenticity; film and bracelet link count also matter.
Is the green rubber-style strap included?
The photos show separate green strap halves, keepers, a pin buckle and a spring bar beside the steel-bracelet watch. A product photograph is not a shipping guarantee. Put every included strap and hardware item into the written order summary and repeat them in final exact-unit QC.
What does the timegrapher image show?
One visible screen reads +6 seconds per day, 286 degrees, 0.3 milliseconds and 28,800. The rows show some variation, and this remains one machine session rather than a several-position test. It does not identify the installed movement or predict long-term wrist accuracy.
Do the 8800, ZrO2 and 300m markings prove the specifications?
No. Those photographed markings are useful for visual QC matching, but they do not prove Calibre 8800, ceramic composition, Master Chronometer certification, steel grade or 300 m pressure resistance. Those properties need sample-specific disclosure and appropriate testing.
Was the retained product video used to make these claims?
No. The model-linked MP4 remains embedded and passed an HTTP byte-range delivery check, but it was not watched. Every visual claim in this draft comes from the ten inspected still photos. Ask for a fresh continuous exact-unit QC clip before approval.
What should be confirmed before paying the balance?
First resolve whether the order is the black 210.30.42.20.01.001 or the green 210.30.42.20.10.001 direction. Then confirm included bracelet and strap parts, film-free dimensions and weight, installed movement, date/crown/bezel operation, several-position timing, lume, pressure-test request, current US$567 price, warranty and delivery terms.