White wave dial · black bezel · steel-tone bracelet
Omega Seamaster Diver 300M 210.30.42.20.04.001 Replica Watch
This Omega Seamaster replica follows the white steel-bracelet direction of reference 210.30.42.20.04.001. Ten still photos show the wave-pattern-style dial, black diving bezel, date window, both case profiles, bracelet, clasp hardware, transparent decorated back and an approximately 13.7 mm calliper display. The retained video was not watched.
One sample measurement is pictured; performance testing is still absent
The colour, date layout, bracelet direction and pictured calliper reading are useful exact-listing evidence. The archive does not establish sample weight, movement identity, timing, reserve, lume endurance, materials, control operation or pressure resistance. Fresh exact-unit QC must supply those results.
Evidence boundary
OMEGA's official specifications describe the genuine reference. The ten still photographs describe this sample. Similar colour, layout, markings, measured appearance or decoration cannot prove authentic materials, calibre, certification or performance.
Official genuine context
42 mm · 13.56 mm · about 192 g
OMEGA also lists 49.90 mm lug-to-lug, 20 mm between lugs, Calibre 8800, 55 hours and 30 bar for the genuine reference.
Pictured sample
White-date layout and thickness view
The photographs establish the visible configuration and show an approximately 13.7 mm calliper display with protective film present.
Missing sample evidence
No scale, timing or pressure test
Request film-free full dimensions, weight, multi-position timing, reserve, lume, control operation and any agreed pressure result.
An omega seamaster super clone comparison becomes useful only when the measurement procedure, movement disclosure and performance tests belong to the same physical white-date watch shown in the order QC.
Six supporting photo groups
Case Controls, Clasp Hardware and Trace Markings
The remaining six stills document construction details while keeping appearance, materials and function as separate claims.
Clasp exterior
The wide brushed cover and Omega-style logo are clearly visible. Surface appearance alone cannot establish steel grade, latch security, adjustment range or durability.
Valve-side profile
The conical-valve-style control, case layering, bezel edge and bracelet articulation can be compared. Valve operation, gasket condition and pressure performance remain untested.
Inner clasp inscription
IJC, 50, STAINLESS STEEL, STZ001159 and Omega-style marks are visible. They are trace details, not laboratory material proof or a factory certificate.
Push and adjustment hardware
The PUSH control and extension-like components appear at rest. Final QC should show the full adjustment sequence, every position and positive lockup on the exact bracelet.
Open folding blades
The open view shows blade length, hinges, pivots and brushed surfaces. Repeated closure, latch engagement and resistance under normal load still require video evidence.
Full clasp assembly
The wider view connects inner marks, folding blades, clasp cover and bracelet links in one frame. Use those details to trace the same unit through fresh sizing and function QC.
Model-linked media retained
Native MP4 Retained Without Borrowing Unseen Claims
The 26,201,700-byte MP4 passed HTTP Range delivery with status 206. It was not watched, so it contributes no evidence for bezel clicks, crown/date action, valve function, clasp travel, movement, timing, lume decay or water resistance. Use a fresh exact-unit clip for those checks.
Photo-based evidence chain
What the Archive Shows and What Final QC Must Add
Confirmed by still photos
White wave-pattern-style dial, black diving bezel, date at six showing 18, red dial accents, steel-tone case and bracelet, both side controls, clasp cover/blades/push hardware, transparent decorated back, visible style marks and an approximately 13.7 mm calliper display.
Not confirmed
Factory, origin, steel grade, ceramic, enamel, sapphire, film-free complete dimensions, weight, Calibre 8800, certification, reserve, timing, lume endurance, control function or pressure resistance.
Best next request
One cut-free film-free exact-unit sequence: dial and identifiers, bezel, crown, valve, date change, back, bracelet sizing and clasp travel, zeroed full dimensions, zeroed weight, movement disclosure, multi-position timing, reserve, lume and agreed pressure test.
Omega replica watch buyer guide
210.30.42.20.04.001: White Dial, Pictured Thickness and Exact-Unit QC
The exact reference and the visible white-dial layout agree
The listing names 210.30.42.20.04.001, while the stills show the characteristic white-date steel-bracelet direction: white wave-pattern-style face, black diving scale, six-o'clock date, red Seamaster script, blackened skeleton-style hands, conical-valve-style control and transparent back. That is strong identity alignment, not authentication.
Use the official specification only as a genuine-reference benchmark
The OMEGA reference page lists 42 mm diameter, 49.90 mm lug-to-lug, 13.56 mm thickness, 20 mm between lugs and approximately 192 g. It also lists steel, sapphire, Calibre 8800, 55 hours and 30 bar for the genuine watch only.
White and black contrast is confirmed; ceramic is not
The front view clearly separates the light dial, dark bezel, dark hand/marker surrounds and red accents. OMEGA describes a black ceramic bezel, white enamel diving scale and polished white ceramic dial for the genuine reference. The sample's colour, gloss and wave pattern are visual facts; its chemistry and hardness are not established.
The photographed thickness reading is valuable but conditional
One close-up displays about 13.7 mm on a digital calliper placed across the case-thickness direction. Protective film is present, the zero display is not shown and a still cannot prove jaw pressure or exact placement. Request a film-free repeat that starts at zero and keeps the dial, back and identifiers in the same uncut sequence.
The six-o'clock date is a useful model anchor
The window is centered at six and displays 18. It helps distinguish this familiar date-equipped design from no-date variants. Final QC should demonstrate crown positions, quickset behaviour and a complete date change, then return the numeral to a centered position.
Inspect wave alignment and print edges without protective film
The wave pattern, applied marker positions, minute track, red wordmark and lower dial text can be compared in the front photograph. Glare and film can disguise edge quality. Ask for a neutral-light, camera-level, film-free frame before accepting dial cleanliness and alignment.
Bezel appearance is visible; bezel mechanics remain unknown
The black insert, white scale and luminous-style pip are visible. Rotation direction, click count, backlash, vertical play and return-to-twelve alignment are not. A cut-free close-up should rotate the bezel through a full turn and finish exactly at twelve.
Both crown-side and valve-side profiles are represented
The archive shows the guarded crown, the conical-valve-style control, bezel edge, caseback depth and polished/brushed transitions. It does not show threading, winding, setting, valve operation, gasket condition or sealing. Treat shape and function as separate QC lines.
The clasp archive supports a real hardware comparison
The broad brushed cover, folding blades, pivots, inner markings, PUSH control and adjustment/extension-style parts are visible from several angles. The photos do not prove steel grade, adjustment travel, link tolerances, latch security or long-term durability.
Ask to see comfort setting and diver extension through every position
OMEGA specifies a foldover clasp with comfort setting and diver extension for the genuine reference. The photographed sample contains similar-looking hardware, but only a continuous demonstration can prove travel, detents, positive lockup and repeatability on the exact sized bracelet.
Decorated movement appearance cannot identify the installed calibre
The transparent back shows an automatic-looking decorated movement with an 8800-style inscription. That visual resemblance cannot establish architecture, parts compatibility, service route, accuracy or reserve. Request the seller's installed-movement name plus several-position timing and a full reserve record.
Visible marks help trace one unit, not certify it
STZ001159-, IJC-, Stainless Steel-, 8800- and number-like text appears in the archive. Use the same marks to connect new dial, measurement, function and test footage to one physical watch. Do not treat them as proof of factory, material, serial allocation or authenticity.
Diameter, lug-to-lug and weight are still missing
The thickness image does not replace a full measurement set. Ask for the calliper zero followed by film-free diameter, lug-to-lug and thickness, plus the final sized-bracelet weight on a zeroed scale. Never copy those results from the blue, green or no-date alternative.
No timegrapher screen means no sample rate claim
There is no rate, amplitude, beat-error, frequency or lift-angle display. A serious omega seamaster super clone comparison should show the fully wound exact unit in several positions with machine settings visible, then repeat later in the reserve.
Lume colour and endurance need their own evidence
The hands, markers and bezel pip carry pale luminous-style fills, but there is no charge-and-decay sequence. For a high quality omega replica watches comparison, request equal-exposure frames immediately after charging and after one, five and fifteen minutes.
Diver 300M wording is not a pressure certificate
OMEGA lists 30 bar for the genuine reference. The sample's 300m / 1000ft and Diver 300M-style wording is printed appearance only. If water use matters, define the test pressure, equipment, duration and written limits before payment and before water exposure.
Search phrases should narrow evidence, not manufacture grades
omega copy watch, omega super clone, omega seamaster replica and high quality omega replica watches are useful discovery phrases from the supplied workbook. Here they lead to the exact white-dial configuration, documented photos, missing tests and a practical order checklist instead of unsupported factory or quality labels.
The retained MP4 remains available without unseen claims
The 26,201,700-byte MP4 passed a 206 byte-range response and remains embedded. It was not watched. This draft therefore does not infer bezel sound, crown feel, calendar action, clasp movement, timing, lume or wrist behaviour from unseen footage.
Compare three nearby choices by colour, date and bracelet format
Use the blue-dial 210.30.42.20.03.001 listing for a lower-contrast ocean colourway, the green 210.30.42.20.10.001 listing for a different colour identity, or the black/orange no-date 210.30.42.20.01.018 listing for mesh-bracelet construction and a cleaner lower dial. Verify every linked sample independently.
Build the final order record around one exact white watch
Record white wave dial, black bezel, six-o'clock date, steel-tone bracelet, clasp configuration, visible trace marks and current price. Then require film-free dimensions and weight, movement disclosure, crown/date/bezel/clasp operation, several-position timing, measured reserve, lume sequence and any agreed pressure result tied to that same unit.
Related model comparisons
Three Diver 300M Alternatives with Clear Buyer Differences
Compare dial colour, date layout and bracelet architecture first; then verify the media and tests on each linked page independently.
Blue colour alternative
Seamaster 210.30.42.20.03.001
Choose the blue wave-dial and blue-bezel direction for a more traditional ocean colourway while retaining a date-equipped steel-bracelet layout.
Green colour alternative
Seamaster 210.30.42.20.10.001
The green dial and bezel direction changes the colour identity while staying within a date-equipped steel-bracelet Diver 300M format.
No-date mesh alternative
Seamaster 210.30.42.20.01.018
Use the black/orange no-date page when mesh-bracelet construction and a cleaner lower dial matter more than this white-date arrangement.
How Time-mimic Should Handle Your 210.30.42.20.04.001 Inquiry
The reference and visible direction align, and a sample thickness view exists. The remaining job is to tie the full measurements, materials, function and performance evidence to the exact white watch that will ship.
1 · Lock the visible configuration
Record white wave dial, black bezel, six-o'clock date, steel-tone bracelet, clasp style, wrist-size request and current US$567 price.
2 · Identify one exact unit
Keep dial, back, clasp marks and bracelet details continuously visible across fresh QC before accepting any measurement or result.
3 · Repeat dimensions and add missing tests
Show zeroed film-free full dimensions and weight, installed movement, controls, several-position timing, reserve, lume and any agreed pressure test.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for movement, crown, date, bezel, valve, bracelet, clasp and any agreed pressure-test result.
Flexible options
Deposit, QC & Final Payment
After the configuration, sample evidence and requested tests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm the exact reference, visible configuration and wrist sizing
- 2. Confirm $567 and pay US$20 deposit to start sourcing/QC
- 3. Review fresh measurements, controls, movement, timing, reserve and requested tests
- 4. Pay balance only after exact-unit approval; then shipment begins
White dial, measurement, clasp, movement and order questions
Omega Seamaster 210.30.42.20.04.001 Replica Watch FAQ
Do the photographs match reference 210.30.42.20.04.001?
The visible configuration is consistent with that white steel-bracelet direction: white wave-pattern-style dial, black diving bezel, six-o'clock date, red Seamaster script, blackened skeleton-style hands, steel-tone case and bracelet, conical-valve-style control and transparent decorated back. This supports design identification, but it does not authenticate the sample or prove its materials and movement.
What do the ten photos actually confirm?
They confirm the dial and bezel colours, date layout, red accents, both case profiles, bracelet links, clasp exterior, folding blades, push/extension-style hardware, transparent decorated back, visible style markings and an approximately 13.7 mm calliper display. They do not show weight, timing, reserve, lume endurance, pressure or continuous control tests.
Is the pictured dial proven to be white ceramic?
No. OMEGA describes polished white ceramic with laser-engraved waves for the genuine reference. The sample photographs confirm a glossy white wave-pattern appearance only. Ceramic composition, surface hardness and production method require seller disclosure or independent testing.
Is 13.7 mm the guaranteed thickness of the delivered sample?
No. One still shows an approximately 13.7 mm calliper display across the case-thickness direction, with film still present. It is useful evidence for the pictured unit, but a final film-free measurement should show the tool at zero, jaw placement and the same exact-unit identifiers before the reading is treated as an order condition.
Does the six-o'clock date prove the calendar works?
No. The window visibly displays 18 and confirms the layout. A still image cannot show quickset behaviour, numeral alignment across the month, midnight change or crown operation. Ask for one continuous exact-unit date demonstration.
Do the caseback markings prove Calibre 8800?
No. A decorated automatic-looking movement and OMEGA MASTER CO-AXIAL 8800-style text are visible. Calibre 8800 is the official genuine-reference specification. The sample needs an installed-movement disclosure, beat-rate evidence, several-position timing and a measured reserve test of its own.
What can be checked on the bracelet and clasp?
The photos show steel-tone multi-link construction, a broad brushed clasp cover, folding blades, inner markings, a PUSH control and adjustment/extension-style hardware. Final QC should show wrist sizing, comfort adjustment, extension travel, positive latch engagement and repeated opening and closure on the exact watch.
Are 42 mm, 49.90 mm, 13.56 mm and 192 g sample specifications?
No. Those are OMEGA's official figures for the genuine reference. Only the approximately 13.7 mm photographed calliper display belongs to this sample archive. Diameter, lug-to-lug and final sized-bracelet weight still need fresh exact-unit measurements.
Is this replica proven water resistant to 300 metres?
No. The dial and back carry Diver 300M-style wording, but the sample archive contains no pressure result. OMEGA's 30 bar rating applies to the genuine watch. Agree on an exact-unit test and written use limits before exposing the replica to water.
Was the retained product video watched for this rewrite?
No. The 26,201,700-byte MP4 remains attached and passed HTTP Range delivery with status 206. All visual claims in this draft come from the ten inspected still photographs. Request a fresh continuous exact-unit video for bezel, crown, valve, date, clasp and final identity checks.