Title and media conflict · Aqua Terra-style sample
Omega Seamaster Diver 300M 210.10.39.21.03.002 Replica Watch
The published name says Diver 300M, but the ten supplied photos show a blue vertical-dial, no-bezel Aqua Terra 150M-style watch with date at three, steel-tone bracelet and transparent 8500-style mechanical back. Images read about 43.6 mm across the crown direction, 13.3 mm and 160 g.
Choose the title or the photographs before ordering
A Diver 300M should not be sold from Aqua Terra-style media. The page must obtain a corrected reference and a fresh matching QC set before the US$20 deposit is treated as approval of a specific watch.
Identity conflict
Diver title, Aqua Terra-style media
No dive bezel, 150m dial text and Aqua Terra caseback wording make the mismatch visible without relying on the unseen video.
Closest official context
41.5 mm Aqua Terra 231.10.42.21.03.003
Omega lists a blue Teak dial, steel bracelet, 12.95 mm, about 134 g, Calibre 8500, 60 hours and 15 bar.
Strongest physical difference
160 g versus official about 134 g
The roughly 26 g displayed gap needs a bare exact-unit repeat and construction disclosure.
Relevant workbook searches include omega seamaster super clone, omega seamaster replica and omega aqua terra clone. The terms guide buyers to the page; the evidence prevents broad omega super clone wording from concealing the identity problem.
Six supporting views, six evidence limits
Read the Caseback, Lume and Timing Screen Carefully
The details help identify the photographed style but do not prove movement, material or performance claims.
Crown-side profile
The polished and brushed steel-tone transitions, logo crown and protected bracelet are visible. Crown construction, metal grade and sealing are not established.
Aqua Terra and 8500-style back
The transparent back shows a full rotor plus Aqua Terra, 8500 and anti-magnetic-style text. These markings make the title conflict clearer but do not prove movement identity.
Folding clasp under film
The clasp exterior and bracelet finishing are partly visible through film. Opening sequence, adjustment, internal markings and holding strength need exact-unit checks.
Immediate blue lume response
Directed light produces blue light on hands and several markers. One image cannot show charging consistency, brightness balance or useful duration.
Movement under directed light
Red jewel-like parts and decoration become more visible. The light is not a sapphire, jewel-count, calibre, magnetic or authenticity test.
One timing-machine state
The display shows +4 s/day, 237 degrees, 0.1 ms and 52.0 degrees. The last value is a lift-angle setting, not beat rate.
Original media retained
Keep the Video, Request a Corrected Continuous QC Clip
The native MP4 remains attached and supports partial-file delivery. It was not watched or used to settle the conflict. A replacement clip should begin with the corrected written reference and keep one watch in frame through the dial, bezel or no-bezel design, dimensions, scale, crown, date, bracelet, clasp, movement, timing, reserve and pressure checks.
Three evidence levels
Published Title, Supplied Sample and Closest Genuine Comparison
Published title
Diver 300M and 210.10.39.21.03.002-style reference language.
Supplied sample
No external dive bezel; blue vertical dial marked 150m / 500ft; Aqua Terra/8500-style transparent back.
Required proof
Choose the desired family, provide a corrected reference and issue a fresh matched media set.
Closest official dimensions
41.5 mm, 48.50 mm lug-to-lug, 12.95 mm and approximately 134 g.
Pictured readings
About 43.6 mm crown-side span, 13.3 mm and 160 g with film.
Required proof
Case-only diameter, crown width, lug-to-lug, repeated thickness and bare exact-unit weight.
Closest official performance
Calibre 8500, 60-hour reserve, 3.5 Hz, chronometer, anti-magnetism and 15 bar.
Pictured evidence
One +4 s/day, 237 degrees, 0.1 ms screen; 52.0-degree lift-angle setting; no bph shown.
Required proof
Movement disclosure, multi-position timing, timed reserve, magnetic claim evidence and exact-unit pressure result.
Identity-first Seamaster buyer guide
Aqua Terra Evidence, Diver 300M Conflict and Exact-Unit QC
The supplied watch is not visually a Diver 300M
The published title and slug suggest Diver 300M, but the photographs show no external diving bezel, no helium valve and no wave-pattern Diver dial. Instead, the dial says 150m / 500ft and the transparent-back ring says Aqua Terra. Buyers need this conflict before any style or quality discussion.
The page reference string does not resolve the conflict
The title uses 210.10.39.21.03.002-style numbers, while no matching exact Omega official page was found in the targeted official search. The body therefore keeps the public identity visible but does not pretend those numbers name the pictured sample. The written order must state the reference actually being sourced.
The closest official visual match is 231.10.42.21.03.003
Omega's discontinued Aqua Terra 150M 41.5 mm reference 231.10.42.21.03.003 has the blue vertical Teak Concept dial, date at three, steel bracelet, transparent back and Calibre 8500 context seen in the sample's design language. This is a comparison anchor, not authentication or an exact-reference conclusion.
Blue vertical lines define the photographed dial
The sample has a dark blue vertically striped or teak-style surface, applied baton markers, broad arrow minute hand, central seconds and date at three showing 12. Ask for diffuse light and slow oblique movement to check whether the grooves, print, markers and date frame remain straight and consistent.
The outer minute scale is not a diving bezel
Minute numerals sit on an inner dark ring under the crystal. There is no rotatable external bezel in the images. This makes the page's Diver 300M wording misleading for a buyer expecting dive timing, a 12 o'clock pip and bezel-action testing.
One 43.6 mm image appears to include the crown side
The horizontal caliper reads about 43.6 mm, but the right contact sits near the crown and the exact contact points are difficult to verify. Do not subtract that value directly from the closest official 41.5 mm case diameter. Request case-only diameter and maximum width including crown as separate zeroed readings.
The 13.3 mm thickness is close but sample-specific
A side caliper photo reads about 13.3 mm. Omega lists 12.95 mm for the genuine 231.10.42.21.03.003 comparison, a displayed difference of roughly 0.35 mm. Jaw angle, crystal/caseback contact and tool tolerance matter, so the page treats this as one photographic result.
The 160 g sample is materially heavier than the closest genuine reference
The complete bracelet watch appears on a scale reading about 160 g while Omega lists approximately 134 g for the genuine 231.10.42.21.03.003. The displayed gap is about 26 g. Protective film and bracelet sizing should be documented, but the difference is too large to hide behind a generic high quality replica watch label.
Weight affects both comfort and construction questions
A heavier bracelet watch may feel more substantial, but the number alone is neither praise nor criticism. Ask for the exact bracelet link count and a bare-watch repeat. Then request written case, bracelet and movement disclosure rather than assuming a 160 g total proves steel grade or accuracy.
The transparent back reinforces the Aqua Terra direction
The caseback ring visibly includes Aqua Terra, ANTI-MAGNETIC >15000 GAUSS and Stainless Steel-style wording, while the rotor carries OMEGA CO-AXIAL 8500-style text. These visual cues contradict Diver 300M branding, yet inscriptions remain decoration until the sample's movement and materials are actually verified.
8500-style lettering is not Calibre 8500 identity
Omega specifies genuine Calibre 8500 for the closest official match. The sample's full-size striped rotor and bridge decoration echo that look, but still photography cannot establish two-barrel architecture, co-axial escapement, 25,200 vph frequency, anti-magnetism or serviceability.
The timing display does not show beat rate
The screen visibly reads +4 s/day, 237 degrees, 0.1 ms and 52.0 degrees. The 52.0-degree field is the machine's lift-angle setting, not a frequency such as 25,200 or 28,800 bph. This page deliberately avoids inventing a beat rate that is absent from the photograph.
One +4 s/day state is not stable performance
A single trace in one undocumented position may change with wind level, position and machine settings. Request a full wind, confirm the lift angle and beat rate used, and record stable traces dial-up, crown-down and in at least one more vertical position. Printed chronometer wording is not a substitute.
The closest official 60-hour reserve must not transfer
Omega lists 60 hours for genuine Calibre 8500. The sample has no timed reserve record. A valid exact-unit test states how it was wound and the start time, leaves it under defined conditions and records the final stop time without resets or edits.
Fifteen-thousand-gauss text needs a magnetic test
The genuine comparison reference carries official anti-magnetic context above 15,000 gauss, and similar wording is visible on the sample's back. Engraving cannot prove magnetic performance. Unless a documented test and recovery procedure exist, treat this as appearance only.
Instant lume is only the first checkpoint
A flashlight produces a blue response on the hands and multiple hour markers. That confirms one immediate response in one exposure. A useful comparison charges the watch for a fixed interval, then photographs it immediately, at 30 minutes, two hours and later with identical settings.
The crown needs a continuous operation sequence
The right-side logo crown is visible, but screw-down construction, winding, setting positions, date adjustment and reseating are not shown. Omega lists a screw-in crown for the genuine Aqua Terra comparison; the sample needs its own continuous demonstration and pressure evidence.
The steel bracelet and clasp remain appearance facts
The three-link bracelet mixes brushed and polished-looking surfaces and the folding clasp carries a logo under film. Ask to remove agreed film, show link sides, end-link fit, removable-link count, clasp interior, adjustment and ten closure cycles. Photographs do not prove alloy or long-term wear.
Sapphire and anti-reflective treatment are unproved
The genuine closest match uses domed sapphire with anti-reflective treatment on both sides and a transparent sapphire back. The replica images only show clear windows and reflections. Material disclosure and agreed non-destructive testing are needed before using sapphire as a sample specification.
150 m on the dial is not a pressure result
The sample dial visibly says 150m / 500ft and the closest genuine Aqua Terra is rated 15 bar. Neither printed text nor an official reference proves the replica can withstand that pressure. If water contact matters, agree on an exact-unit test, duration and remedy before shipment.
The retained video contributes no unseen evidence
The original MP4 remains attached and passed a partial-file delivery check, but it was not watched under the image-first instruction. The rewrite makes no claim from its frames. A fresh continuous clip should begin with the written identity and keep one watch in view through every requested check.
Search terms should lead buyers to the correction
The workbook includes omega seamaster super clone, omega seamaster replica and omega aqua terra clone alongside broader omega copy watch and omega super clone phrases. Here those terms help a buyer find the listing, while the content prevents an Aqua Terra-style sample from being mistaken for a Diver 300M.
The order summary must choose title or photographs
Before any deposit, the buyer should state whether they want a genuine-style Diver 300M configuration matching the published title or the blue Aqua Terra 150M-style watch shown in the images. A corrected written reference and fresh matching media are mandatory; otherwise the order is ambiguous.
Approval belongs to one fully identified unit
After identity is fixed, record dial, bezel or no-bezel architecture, case, bracelet, clasp, current US$567 price, US$20 deposit, warranty, shipping terms and every requested test. Pay the balance only after the exact sourced unit matches the written record.
The closest genuine-reference comparison was checked against Omega's official Aqua Terra 150M 231.10.42.21.03.003 page. That source helps identify the photographed design direction; it does not authenticate the replica or repair the page title.
Identity before adjectives
The Corrected-Reference Gate
1 · Choose the watch family
Decide between a Diver 300M with external dive bezel and the pictured no-bezel Aqua Terra 150M style.
2 · Match reference and media
Require one corrected written reference, ten matching images and a continuous clip of the same unit.
3 · Then test the exact unit
Repeat size, weight, crown, date, clasp, movement, timing, reserve, lume and pressure evidence before balance.
Follow the media, follow the title, or go dressier
Three Related Omega Models with Clear Comparison Roles
The alternatives help the buyer resolve the current page's identity problem rather than merely adding links.
Follow the photographed family
Omega Seamaster Aqua Terra 220.10.41.21.01.001
Compare a newer Aqua Terra listing if the no-bezel, steel-bracelet everyday design is what attracted you to these images.
Follow the published title
Omega Seamaster Diver 300M 210.10.41.21.01.002
Choose a Diver 300M listing when an external diving bezel and true diver-style architecture are the intended features.
Dressier strap alternative
Omega De Ville 434.23.40.20.02.002
Move to a silvery dial, warm two-colour detailing and brown strap for a more formal Omega direction.
How Time-mimic Should Handle This Mislabelled Seamaster Inquiry
A high quality omega replica watches result should help the buyer detect the wrong family before money changes hands.
1 · State the conflict
The title says Diver 300M; the photos say no-bezel Aqua Terra 150M-style watch.
2 · Correct the reference
Do not treat the closest official 231.10.42.21.03.003 match as the sample's identity without written and visual proof.
3 · Reissue QC
All measurements, weight and mechanical tests should belong to one corrected exact unit.
After-sales protection
Warranty & Shipping
The published offer includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems and replacement for a shipment confirmed lost in transit. Identity errors and their remedy should also be written before payment.
Resolve before payment
Identity, Deposit, QC & Final Balance
First decide whether the order is a Diver 300M or the pictured Aqua Terra 150M-style configuration. Confirm the corrected reference, matched media and US$567 price. A US$20 deposit should start sourcing only after identity is clear; pay the balance only after exact-unit approval.
- 1. Choose Diver 300M or the pictured Aqua Terra-style watch
- 2. Receive a corrected reference and matching exact-unit media
- 3. Confirm US$567 and pay US$20 deposit to start sourcing/QC
- 4. Review dimensions, bare weight and functional evidence; pay balance only after approval
Identity, dimensions, weight, movement and order questions
Omega Seamaster Page 32078 Replica Watch FAQ
Is the photographed watch a Seamaster Diver 300M?
The supplied images do not show Diver 300M architecture. They show no external dive bezel or helium valve, and the dial says 150m / 500ft while the back says Aqua Terra. Confirm whether the buyer wants the title's Diver 300M or the pictured Aqua Terra-style watch.
What official Omega reference most closely matches the photographs?
The closest official visual match found is discontinued Aqua Terra 150M 41.5 mm reference 231.10.42.21.03.003. It is a comparison anchor only; the photographs do not prove that exact reference or authenticity.
Is the photographed 43.6 mm reading the case diameter?
It should be treated as an ambiguous crown-side maximum span because the right jaw appears near the crown. Request separate zeroed case-only diameter, crown-included width, lug-to-lug and thickness measurements.
How does the photographed thickness compare?
The sample reads about 13.3 mm, versus official 12.95 mm for the closest genuine comparison. The displayed difference is roughly 0.35 mm, but a second zeroed measurement is needed before judging it.
Why is the 160 g reading important?
Omega lists approximately 134 g for the genuine 231.10.42.21.03.003 comparison; the filmed sample reads about 160 g, roughly 26 g more. Repeat the exact unit without film and state bracelet sizing, then disclose construction rather than hiding the difference.
What do the timegrapher numbers mean?
One screen shows +4 s/day, 237 degrees, 0.1 ms and 52.0 degrees. These are a rate, amplitude-like value, beat-error-like value and lift-angle setting in one state. The image does not show bph and does not establish multi-position stability.
Do 8500 and 15,000-gauss markings prove movement and anti-magnetism?
No. They are visible style markings. Request movement disclosure, several timing positions, timed reserve and any documented magnetic test; do not transfer genuine Calibre 8500 specifications to the replica.
Are sapphire, steel and 150 m water resistance confirmed?
No. The images show steel-tone surfaces, clear windows and 150m text. Material and pressure performance require sample-specific disclosure and testing. Official specifications apply only to the genuine comparison reference.
Was the product video reviewed?
No. It remains attached and passed a Range delivery check, but it was not watched and supports no statement here. Request a fresh continuous video linked to the corrected identity and exact sale unit.
How should ordering proceed with the identity conflict?
First choose Diver 300M or the pictured Aqua Terra-style configuration and obtain a corrected written reference plus matching QC. Then confirm the US$567 price and US$20 deposit; pay the balance only after dimensions, weight and functional evidence are approved.