Warm two-colour De Ville sample · ten-photo evidence review
Omega De Ville 434.23.40.20.02.002 Replica Watch
This pictured Omega De Ville replica watch combines a silvery crystal-textured-looking dial, warm-yellow-tone bezel and details, polished steel-tone case, brown crocodile-pattern strap, pin buckle and transparent mechanical back. Photos read about 40.0 mm, 10.7 mm and 63 g; a single timegrapher state shows +4 s/day, 273 degrees, 0.2 ms and 28,800 bph.
The sample's displayed 28,800 bph does not match genuine Calibre 8800 frequency
Omega publishes 3.5 Hz, equal to 25,200 vph, for the authentic reference. The visible 28,800 bph reading is a different rate, so rotor and dial lettering cannot prove Calibre 8800 identity or Master Chronometer status.
Observed sample
Elegant proportions, clear movement caveat
The sample visually follows the reference closely, yet its timegrapher frequency provides a concrete reason to keep movement claims separate.
Official reference context
40 mm third-generation Prestige
Omega lists steel and 18K yellow gold, sapphire, brown alligator/calf strap, Calibre 8800, 55 hours and 3 bar.
Mechanical mismatch
28,800 is not 25,200
Printed 8800-style wording does not erase the different rate shown by the sample's single timegrapher screen.
Whether the search starts with omega copy watch, omega super clone, high quality omega replica watches, super clone watches or luxury replica watch, the useful buying decision comes from the exact photographed configuration and the limits of its evidence.
Six supporting views, six limited conclusions
Examine Finish, Strap, Buckle and Movement Separately
Every caption says what the photo can support and keeps material or performance claims behind a proper exact-unit test.
Thin two-colour profile
A warm-yellow-tone bezel and crown sit against polished steel-tone case sides. Appearance does not prove 18K yellow gold, steel grade or crystal material.
Transparent mechanical back
A full-size rotor and red 8800-style lettering are visible. They reproduce a design direction but do not prove Calibre 8800 architecture or certification.
Brown strap and pin buckle
The glossy crocodile pattern, stitching, keepers and logo-style buckle are visible. Leather species, origin, lining and long-term comfort remain untested.
Buckle inscriptions
STAINLESS STEEL and number-like text can be read underneath. Markings alone do not verify alloy, supplier, batch, serial validity or load capacity.
Inspection light on the movement
Directed light reveals red jewel-like parts and finishing. It is not a sapphire, jewel-count, magnetic, calibre or authenticity test.
Approximately 63 g
The complete open-strap watch appears on a scale reading about 63 g. Repeat the exact sale unit on a zeroed scale before comparison.
Original media retained
Keep the Video, Request a Fresh Continuous QC Clip
The native MP4 remains attached and supports partial-file delivery. It was not watched or used for claims. A fresh clip should keep the same watch in view through reference, dimensions, scale, crown, date, buckle, movement, several timing positions, timed reserve and any agreed pressure test.
Three evidence levels
Genuine Reference, Supplied Sample and Required Proof
Official dimensions
40 mm, 46.26 mm lug-to-lug, 9.93 mm thickness and about 64 g.
Pictured sample
About 40.0 mm, 10.7 mm and 63 g in separate single photographs.
Required proof
Zeroed repeated diameter, lug-to-lug, thickness and exact bare-watch weight.
Official materials
Steel/18K yellow gold, sapphire and brown alligator/calf strap with steel pin buckle.
Pictured sample
Steel- and warm-yellow-tone surfaces, clear windows, brown patterned strap and marked buckle.
Required proof
Written case, coating, crystal and strap disclosure plus buckle cycle/pull checks.
Official performance
Calibre 8800, 25,200 vph, Master Chronometer, 55 hours and 3 bar.
Pictured sample
8800-style text; one +4 s/day, 273 degrees, 0.2 ms, 28,800 bph state.
Required proof
Movement disclosure, multi-position stable traces, timed reserve and exact-unit pressure result.
Two-colour De Ville buyer guide
Dimensions, Frequency, Movement, Strap and Exact-Unit QC
A warm two-colour dress-watch configuration
The ten images consistently show a silvery dial, warm-yellow-tone hands, markers, bezel and crown, polished steel-tone case, brown crocodile-pattern strap, pin buckle and transparent mechanical back. Record all of those visible choices in the order so an Omega De Ville replica watch inquiry cannot drift to a nearby variant.
The page title matches a real Omega reference
Omega's official page identifies 434.23.40.20.02.002 as a third-generation De Ville Prestige 40 mm in steel and 18K yellow gold on brown leather. That is useful genuine-reference context, not an authentication certificate or a ready-made specification for this pictured replica.
The silvery crystal-finish look needs moving light
The dial appears pale silver with a soft, faceted or crystal-like surface rather than the vertical brushing of the previous 424 reference. Ask for slow oblique light around the dial to check texture continuity, printing clarity and whether the outer minute track is evenly spaced.
Roman numerals and cabochon-like markers alternate
Warm-tone Roman XII, IX and VI are joined by a Roman-style marker near three plus small rounded or baton-like hour details. Inspect centring, height, adhesive residue and the relationship between every marker, the minute track and the date window.
Date at six changes the dial balance
The supplied front views show a date window at six with 2 displayed. Confirm centring, background tone and print weight, then request a continuous quickset and midnight-change sequence. Different hand positions across stills are not enough to prove correct date operation.
Warm colour is not a gold-content test
The bezel, crown, hands and hour details have a yellow-gold visual tone, while the case and lugs look steel coloured. Omega specifies 18K yellow gold and steel for the genuine watch, but the replica needs written material and plating disclosure. Colour alone cannot establish karat, thickness or wear resistance.
The 40.0 mm reading is encouraging but still single-shot
The front caliper image reads about 40.0 mm and appears to meet the case rather than the crown. That visually aligns with Omega's nominal 40 mm genuine diameter. Even an apparent match should be repeated with the zero and both contact points visible; identical diameter does not mean identical internal construction.
The photographed thickness is about 0.77 mm higher
The side caliper reads about 10.7 mm. Omega lists 9.93 mm for the genuine reference, making the displayed difference about 0.77 mm. Jaw angle, crystal profile, caseback contact and tool tolerance can affect one image, so request a second zeroed placement instead of overstating precision.
Lug-to-lug is missing
Omega publishes 46.26 mm lug-to-lug and a 19 mm lug width for the genuine watch. Neither sample dimension is shown. Ask for straight, labelled measurements because lug span and strap bend often influence fit more than nominal round-case diameter.
The 63 g reading sits close to the official 64 g
The complete watch and open strap appear on a scale reading about 63 g, while Omega lists approximately 64 g for the genuine reference. The visible gap is roughly 1 g. Scale resolution, strap position and unit variation matter, and a close total does not prove matching gold, steel, leather, crystal or movement.
Frequency is the strongest mechanical mismatch
The sample's timegrapher-style display shows 28,800 bph. Omega publishes 3.5 Hz for genuine Calibre 8800, equal to 25,200 vibrations per hour. Those rates are not the same, so visible 8800-style rotor text must not be used to claim the genuine movement or matching escapement.
The single +4 s/day figure is not a certificate
One displayed test state shows +4 s/day, 273 degrees and 0.2 ms. These are a momentary rate, amplitude-like and beat-error-like reading in one undocumented position with unknown settings. Repeat after a full wind in several positions and preserve the full traces before describing performance.
Master Chronometer wording remains unproved
The dial and movement carry Master Chronometer and 8800-style wording. The genuine Omega watch is METAS Master Chronometer certified, but printed text on a replica does not establish laboratory certification, 0/+6 second standards or 15,000-gauss resistance. Describe the markings, then ask for the tests that actually matter to the exact unit.
A full-size rotor is only visual evidence
The transparent back shows a striped rotor spanning much of the movement window, red lettering and visible bridges. Request slow rotation to check rotor travel, rubbing and noise. A photograph cannot establish winding efficiency, parts architecture, serviceability or genuine Calibre 8800 identity.
Directed light reveals details, not materials
A handheld or directed light produces bright reflections from red jewel-like components under the back. It does not identify sapphire, ruby composition, jewel count, anti-reflective coating or magnetic resistance. A credible test names the property, method and result.
Fifty-five hours must be timed on the sample
Omega specifies a 55-hour reserve for genuine Calibre 8800. The current image set has no elapsed-time record. A useful reserve test documents the winding method and start time, then records the stop time under stated conditions without restarting the watch.
Crown and date should be demonstrated together
The warm-tone crown is visible in profile, but the images do not establish winding direction, setting positions, hand feel or date quickset. Request one continuous clip from winding through time and date adjustment and back to the normal seated position.
The brown strap is pattern evidence only
The outer strap has a glossy brown crocodile-style pattern and stitching, while the underside is black and pebble grained with logo-like embossing. Omega specifies alligator upper and grained calf underside for the genuine watch; the sample photos cannot prove either species, source or treatment.
Pin-buckle details need a practical test
The strap uses a pin-buckle layout rather than a folding clasp. Exterior and underside views show a logo and STAINLESS STEEL plus number-like markings. Ask for pin alignment, hole condition, tang engagement, ten cycles and a gentle pull test; inscriptions do not prove load capacity or steel grade.
Sapphire and anti-reflective treatment are not visible facts
Omega lists domed scratch-resistant sapphire with internal anti-reflective treatment on the genuine watch, plus a transparent sapphire back. The replica images show clear front and back windows only. Written construction disclosure and appropriate non-destructive testing are required before making a material claim.
Three bar is not inherited by the replica
The genuine reference is rated to 3 bar or 30 m, but the sample has no pressure-test image. If the watch may encounter water, agree on the exact pressure, duration and remedy before testing the sale unit. A similar case shape or printed wording provides no seal evidence.
The native video remains outside the evidence set
The original 31 MB MP4 is retained and responded to a partial-file request, but it was not watched under the image-first instruction. No frame-derived claim appears here. Ask for a new continuous clip that ties the exact reference to measurements, scale, crown, date, buckle and timing checks.
Keywords do not resolve the mismatch
Search demand includes omega copy watch, omega super clone and high quality omega replica watches. These phrases help shoppers find the page, but they cannot turn a 28,800 bph display into the genuine 25,200 vph Calibre 8800 frequency or prove materials, certification and water resistance.
Approval should name one unit and one evidence pack
Before the US$20 deposit, record reference 434.23.40.20.02.002, visible dial/case/strap/buckle configuration, current US$507 price, warranty, shipping terms and test requests. Pay the balance only after the exact sourced watch matches the continuous QC record.
Genuine-reference facts were checked against Omega's official De Ville Prestige 434.23.40.20.02.002 page. The source identifies the genuine watch only; it does not authenticate or test this replica sample.
Do not let close size and weight hide a rate mismatch
The Exact-Unit Mechanical Gate
1 · Repeat physical readings
Show the zero and both contacts for diameter, lug-to-lug, thickness and bare-watch weight.
2 · Explain 28,800 bph
Disclose the actual movement and do not label it Calibre 8800 merely because the visible rotor carries matching style text.
3 · Prove stability
Repeat timing after full wind in several positions, then add reserve, crown/date and pressure evidence.
Earlier De Ville, bolder formal, or sportier steel
Three Related Omega Models with Real Reasons to Compare
Each alternative changes a clear design, attachment or wearing decision.
Earlier silver-dial De Ville
Omega De Ville 424.10.40.20.02.001
Compare a steel-bracelet Prestige with blue dial details, a solid back and a different generation of De Ville proportions.
Bolder two-tone dress option
Omega Constellation 131.23.41.21.10.001
Move toward a green dial, darker bezel, Constellation claws and matching green strap for a stronger visual statement.
Sportier steel alternative
Omega Seamaster Aqua Terra 220.10.41.21.01.001
Choose a steel bracelet and more casual Aqua Terra architecture when daily versatility matters more than the De Ville dress profile.
How Time-mimic Should Handle This Two-Colour De Ville Inquiry
A high quality replica watch page should preserve the attractive configuration while stating the frequency mismatch clearly.
1 · Lock the configuration
Reference, dial, warm-tone parts, steel-tone case, brown strap and pin buckle belong in writing.
2 · Name the discrepancy
The sample displays 28,800 bph; the official genuine Calibre 8800 figure is 25,200 vph.
3 · Link tests to one watch
Measurements, scale, crown, date, buckle, movement, timing, reserve and pressure should stay in one continuous record.
After-sales protection
Warranty & Shipping
The published offer includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems and replacement for a shipment confirmed lost in transit. Record whether movement, date, crown, buckle, strap, finish and any pressure claim are covered.
Flexible options
Deposit, QC & Final Payment
Confirm 434.23.40.20.02.002, silvery dial, warm-yellow-tone details, steel-tone case, brown patterned strap, pin buckle and US$507 price in writing. A US$20 deposit starts sourcing and exact-unit QC. Pay the balance only after the measurement and mechanical evidence matches.
- 1. Confirm exact configuration and US$507 listing price
- 2. Pay US$20 deposit to start sourcing and QC
- 3. Review repeated dimensions, weight, movement disclosure, crown/date, buckle, multiple-position timing, reserve and any pressure evidence
- 4. Pay the balance only after approval; then shipment begins
Configuration, size, frequency, movement, strap and order questions
Omega De Ville 434.23.40.20.02.002 Replica Watch FAQ
Which Omega De Ville 434.23.40.20.02.002 configuration is shown?
The sample shows a silvery crystal-textured-looking dial, warm-yellow-tone hands, indexes, bezel and crown, polished steel-tone case, brown crocodile-pattern strap, pin buckle and transparent mechanical back. Confirm all of those visible choices in writing.
Do the photographs prove an 18K yellow-gold and steel case?
No. The sample has warm-yellow and steel-tone surfaces. Omega's official genuine reference uses 18K yellow gold and steel, but the replica needs its own written material and coating disclosure.
How do the sample measurements compare with Omega's official figures?
The sample images read about 40.0 mm and 10.7 mm; Omega lists 40 mm and 9.93 mm for the genuine watch. Diameter looks close, while photographed thickness is about 0.77 mm higher. Repeat both with a visible zero and add lug-to-lug.
How does the photographed weight compare?
The open-strap sample reads about 63 g and Omega lists approximately 64 g for the genuine reference. A roughly 1 g displayed difference is close but does not prove matching materials, movement or construction. Reweigh the exact unit on a zeroed scale.
Why is 28,800 bph important?
The sample's timegrapher display shows 28,800 bph, while official genuine Calibre 8800 runs at 3.5 Hz or 25,200 vph. This visible mismatch means 8800-style text should not be treated as proof of genuine or matching movement architecture.
Does +4 s/day prove Master Chronometer performance?
No. The screen is a single momentary position showing +4 s/day, 273 degrees and 0.2 ms with unknown setup. Master Chronometer is an official genuine-watch certification. Request stable traces after full wind in several positions for the sample.
Is the brown strap confirmed as alligator leather?
No. It has a glossy crocodile-style pattern and a black grained underside. Species, material, source and lining are not established by photographs or embossed logos; confirm the actual strap construction in writing.
Are sapphire, 55-hour reserve and 30 m water resistance confirmed?
No. Those are official genuine-reference facts. The sample needs crystal/material disclosure, a timed reserve record and an exact-unit pressure result before any equivalent claim is made.
How should the retained product video be used?
The MP4 remains attached and passed a partial-file delivery check, but it was not watched and supports no statement on this page. Request a fresh continuous exact-unit QC clip for the selected watch.
What are the price and order steps?
The current listing price is US$507. Confirm the configuration, movement disclosure, required tests, warranty and shipping terms; pay the US$20 deposit to start sourcing and QC, then pay the balance only after approval.