Green-dial Constellation sample · ten-photo evidence review
Omega Constellation 131.23.41.21.10.001 Replica Watch
This listing shows a green gradient dial, gold-tone hands and indexes, black Roman-numeral bezel, four gold-tone claws, steel-tone case, transparent back and green crocodile-pattern strap. A scale reads about 119.6 g and one caliper placement reads about 44.0 mm.
The photographed card and tag do not match the page reference
They show 131.30.41.21.99.001 and watch number 80088688, while this page is titled 131.23.41.21.10.001. Omega identifies the card reference as a 41 mm Constellation Meteorite. The green two-tone watch, card and tag must therefore be re-matched during exact-unit QC.
Observed in this photo set
Green two-tone Constellation-style sample
Four claws, black Roman-numeral bezel, 6 o'clock date, transparent back, green patterned strap and folding clasp.
Official genuine reference
131.23.41.21.10.001
Omega lists 41 mm diameter, 44 mm lug-to-lug, 13.5 mm thickness, about 114 g, Calibre 8900 and 50 m. These are comparison facts only.
Resolve before payment
Card says 131.30.41.21.99.001
That official number belongs to a Constellation Meteorite, not the green title reference. Require a continuous exact-unit identity check.
For buyers comparing an Omega Constellation replica watch with a luxury replica watch catalogue, the important distinction is evidence: search labels such as high quality replica watch and super clone watches do not prove reference match, materials or performance.
Six additional stills, six limited conclusions
Visible Details That Help Build the QC List
Each caption separates what the photograph shows from what still requires a named test.
Paperwork mismatch is visible
The card and tag show 13130412199001 and 80088688 beside a green two-tone watch. Their presence does not prove they belong to the watch.
Crown and claw profile
A gold-tone logo crown and claw details are visible. Winding, crown positions, setting feel and sealing are not demonstrated.
Au750-style mark is not an assay
The opposite side shows gold-tone hardware and a small Au750-style marking. Composition and plating remain unverified.
Clasp remains under film
A logo folding clasp and green patterned strap are visible. Opening, locking, material and usable wrist range need exact-unit checks.
Blue light has no stated method
A blue or ultraviolet-style light is aimed at the movement. It does not prove sapphire, jewels, calibre identity or authenticity.
Angled dial and bezel view
The green dial, gold-tone furniture, claws and black bezel can be compared for alignment, dust and finish under changing light.
Native product media retained
Use the Video to Request a New Exact-Unit Sequence
The existing MP4 remains attached and its server supports partial-file delivery. It was not watched or used as evidence here. A useful replacement clip should keep one watch continuously in view while it resolves the card reference, repeats the measurements and demonstrates the crown, date, clasp, movement and timing result.
Three columns prevent borrowed specifications
Official Reference, Supplied Sample and Required Proof
Official 131.23.41.21.10.001
41 mm diameter, 44 mm lug-to-lug, 13.5 mm thickness and about 114 g.
Supplied sample
One ambiguous 44.0 mm caliper placement and one approximately 119.6 g scale reading.
Required exact-unit QC
Zero the tools, remove loose items, then repeat diameter, lug-to-lug, crown width, thickness and weight.
Official materials
Steel and yellow gold, green leather/rubber strap, sapphire crystal and black ceramic bezel.
Supplied sample
Steel-tone and gold-tone surfaces, crocodile-pattern strap, clear crystal and glossy black bezel.
Required exact-unit QC
Written construction disclosure plus any agreed metal, crystal, bezel and strap tests.
Official calibre and performance
Calibre 8900, self-winding, 60-hour reserve, Master Chronometer context and 50 m.
Supplied sample
8900-style rotor text and a blue-light photograph; no timing, reserve, magnetic or pressure result.
Required exact-unit QC
Movement disclosure, timegrapher positions, winding and date test, timed reserve and agreed pressure test.
Omega Constellation replica buyer guide
Reference Control, Measurements, Movement and Exact-Unit QC
Start with the reference mismatch, not the green dial
The page title names 131.23.41.21.10.001, but the red card and white hang tag in the first photograph show 13130412199001. That second number formats as 131.30.41.21.99.001. Because model identity affects every later comparison, exact-unit QC must first show the watch, its removable tags, any card and the seller's written reference in one continuous sequence.
The pictured paperwork points to a different official watch
Omega's official material identifies 131.30.41.21.99.001 as a 41 mm Constellation Meteorite. The sample shown here has a green sunburst or gradient dial, gold-tone furniture, a black Roman-numeral bezel and a green strap. A meteorite-reference card beside a green two-tone watch is not a minor typography error; it prevents the supplied paperwork from proving model match, warranty or authenticity.
Treat 131.23.41.21.10.001 as the genuine design reference
Omega's official page for the title reference describes a 41 mm steel and yellow-gold Constellation with a green dial and green leather strap. Those details explain the design being imitated and give buyers a disciplined comparison point. They do not establish that this replica uses the official materials, movement, tolerances, certification or after-sales coverage.
The green dial is the strongest visual match
A clean front photograph shows a green dial that shifts from brighter toward darker tones under the light. Gold-tone baton markers, hands, logo and star contrast with the green surface, and a framed date window sits at 6 o'clock. Ask for neutral daylight and low-angle video so colour, printing, dust and reflections can be separated.
Inspect the four claws as a matched set
Constellation claws sit at roughly 3 and 9 o'clock in upper and lower pairs. The photographs show gold-tone pieces against the steel-tone case, but do not prove equal height, screw seating or surface finish. Final QC should use straight-on macro images at both sides and a fingertip sweep to reveal sharp edges or looseness.
Roman numerals need alignment checks around the full bezel
The black bezel carries gold-tone Roman-numeral markings. The front view is useful for checking approximate spacing, yet glare and angle conceal some edges. Request a slow rotation under diffuse light and compare each numeral with the adjacent minute marker, claw and dial index rather than judging only the top half.
One 44.0 mm reading does not identify the measured dimension
The caliper display appears to read about 44.0 mm, but the jaw contact points are not labelled. Omega lists 41 mm for case diameter and 44.00 mm for lug-to-lug on the genuine reference. This makes the photographed number plausible for one dimension and questionable for another. Repeat diameter at 3-to-9, lug-to-lug at 12-to-6 and maximum width with crown as three separate readings.
The weight is close enough to require precision, not assumption
The scale shows about 119.6 g. Omega lists the genuine watch at approximately 114 g, a displayed difference of about 5.6 g. Protective film, strap construction, scale zero and replica materials can all change the result. Record the exact unit alone on a zeroed scale and state whether films and tags were removed.
Gold-tone is the accurate description until composition is tested
Several parts look gold-coloured, including the crown, claws, hands, markers and bezel numerals. One side image also includes an Au750-style mark. Neither colour nor engraving is an assay. If the buyer cares about solid gold, plating or coating life, the order record should name the claimed construction and the verification method.
Steel-tone surfaces need finish consistency checks
The case middle and clasp appear steel-coloured with a mixture of brushed and polished-looking planes. Photographs do not reveal every transition or whether protective film hides scratches. Use diffuse side lighting to inspect the case band, lug edges, clasp cover and bezel interface, then document any finishing line that changes direction or looks uneven.
The crown should be tested through its complete operating sequence
A gold-tone crown with an Omega-style logo is visible in profile. A still cannot show whether it screws down, pulls cleanly through positions, winds smoothly or sets the hour independently. Record winding, each crown position, forward and backward hand setting, date behaviour and final reseating without cutting the clip.
Date alignment matters at more than one number
The front photo shows date 17 in the 6 o'clock aperture. That confirms only one displayed state. Exact-unit QC should show a single-digit date, a double-digit date and the transition around midnight, while checking centring, numeral height, colour and whether the change is abrupt or prolonged.
Movement decoration is not movement verification
The transparent back reveals a broad striped rotor and red OMEGA MASTER CO-AXIAL 8900-style text. These are observable design cues, not proof of a genuine Calibre 8900 or matching clone architecture. Ask for clear video of the balance area, rotor travel, winding response, crown operation and timing measurement before describing the mechanism beyond what is visible.
The orange sticker blocks part of the movement view
A large orange label marked 80088688 covers the central back area and repeats the watch number printed on the mismatched card. Because it obscures components and may be removable, request a clean caseback image after confirming whether the sticker is meant to stay. Removal should not be forced if it affects return terms.
A blue-light photograph is not a materials certificate
One image places a blue or ultraviolet-style light over the movement. It may make jewel-like components and printing easier to see, but it does not authenticate the movement, prove sapphire, measure fluorescence or establish coating composition. Useful QC requires a named test, method and result rather than an unexplained light source.
Ask for a timegrapher in multiple positions
No timing display appears in the supplied stills. A useful report should show rate, amplitude and beat error after the watch is adequately wound, then repeat dial-up, crown-down and at least one vertical position. The machine, lift-angle setting and measurement duration should remain visible so the numbers are interpretable.
A 60-hour reserve belongs to the genuine specification only
Omega lists 60 hours for genuine Calibre 8900. The displayed movement markings do not transfer that figure to this sample. To test the exact watch, fully wind it using an agreed method, record the start time and dial state, leave it untouched and capture the stop time in a continuous evidence log.
Anti-magnetism and certification cannot be copied by text
Official Calibre 8900 carries Master Chronometer and anti-magnetic claims, but those are tied to Omega's tested watch and movement. Replica markings do not prove METAS certification or resistance to 15,000 gauss. This page therefore does not apply official certification language to the sample.
The green strap needs both appearance and fit checks
The strap shows a green crocodile-style pattern and a dark underside with Omega-style markings. Photos do not establish alligator leather, rubber composition, origin, allergy performance or long-term colour stability. Ask for strap width, usable wrist range, keeper condition, edge paint and flexibility at both lugs.
The folding clasp should lock and release consistently
The clasp exterior and logo are visible under protective film, but the mechanism is not shown open. Final QC should demonstrate both folding arms, pushers if present, positive closure, ten repeated open-close cycles and a gentle pull test. Also confirm whether the clasp material is steel or merely steel-coloured.
Water resistance needs an exact-unit pressure result
Omega specifies 5 bar for the genuine reference, but the sample has no pressure-machine evidence. Do not infer water resistance from the design, crown shape or caseback. If water exposure is expected, agree on the test pressure, whether it is dry or wet, and what happens if the watch fails before any balance payment.
The crystal and bezel materials remain unverified
The official model uses a sapphire crystal and black ceramic bezel. This replica's clear crystal and glossy black bezel may look similar, but no hardness, refractive or material test is supplied. Written disclosure plus careful inspection for chips, scratches, coating edges and distortion is more honest than repeating genuine specifications.
Use the video as a request for continuity, not as unseen proof
A native MP4 remains attached to the product record and responded correctly to a partial-file request. Per the current workflow it was not watched, so no visual or mechanical claim in this page depends on it. Ask the seller for a fresh continuous exact-unit clip that begins with the reference mismatch and ends with timing, measurements and clasp operation.
A high quality Omega replica page should reduce uncertainty
Search phrases such as high quality omega replica watches, omega copy watch and omega super clone express buyer intent, but quality is not created by repeating a keyword. It is demonstrated by matching the exact configuration, exposing mismatches early, measuring the same unit and documenting the functions that influence daily ownership.
Decide only after the order record is specific
Write down the title reference, green dial, black Roman-numeral bezel, gold-tone and steel-tone treatment, green strap, clasp, price, deposit, requested tests and the mismatched card number. If the sourced unit differs, pause before the balance payment and ask for a new QC set tied to that unit.
Genuine-reference facts were checked against Omega's official Constellation 131.23.41.21.10.001 product page and its official Constellation Meteorite reference context. Official facts identify the genuine watches only; they do not authenticate or test this replica sample.
A card beside a watch is not enough
The Exact-Unit Identity Gate
1 · Show the title reference
Write 131.23.41.21.10.001 beside the exact green watch and today's date.
2 · Explain the card number
State why 131.30.41.21.99.001 appears and whether the card/tag will be replaced or excluded.
3 · Carry one unit through QC
Keep dial, caseback, sticker, strap and identifying marks visible through all measurements and tests.
Same family, formal alternative, or sportier Omega
Three Related Models with a Clear Comparison Purpose
These internal links keep the comparison inside Omega while changing one major buying decision at a time.
Closest same-family option
Omega Constellation 131.33.41.21.01.001
Compare another 41 mm Constellation strap configuration when the claws and Manhattan design language are the priority.
More traditional formal route
Omega De Ville 434.23.40.20.02.002
A De Ville strap watch shifts attention toward classic dial balance and dress-watch proportions instead of Constellation claws.
Sportier everyday alternative
Omega Seamaster Aqua Terra 220.10.41.21.03.002
The Aqua Terra offers a cleaner sport-watch route for buyers who prefer bracelet practicality over a green dress strap.
How Time-mimic Should Handle This Constellation Inquiry
An omega copy watch or omega super clone label is not a substitute for evidence. The final record should link the exact dial and caseback to every measurement and mechanical test.
1 · Resolve identity
Match title reference, card, tag, watch number, dial, caseback and strap before judging quality.
2 · Repeat physical data
Measure diameter, lug-to-lug, crown width, thickness and bare-watch weight on camera.
3 · Prove daily operation
Test winding, setting, date, clasp, timing, reserve and any agreed pressure level.
After-sales protection
Warranty & Shipping
The published offer includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems and replacement for a shipment confirmed lost in transit. Record whether the movement, date, crown, clasp, coating, strap and any pressure claim are covered.
Flexible options
Deposit, QC & Final Payment
Confirm reference 131.23.41.21.10.001, green dial, black Roman-numeral bezel, gold-tone and steel-tone case, green strap and US$478 price in writing. A US$20 deposit starts sourcing and exact-unit QC. Pay the balance only after the 131.30.41.21.99.001 card mismatch and all agreed checks are resolved.
- 1. Confirm the exact visible configuration and US$478 listing price
- 2. Pay US$20 deposit to start sourcing and exact-unit QC
- 3. Resolve the paperwork mismatch and review measurements, mechanics, timing, reserve and pressure evidence
- 4. Pay the balance only after approval; then shipment begins
Reference, dimensions, weight, materials, movement and order questions
Omega Constellation 131.23.41.21.10.001 Replica Watch FAQ
What do the ten photos confirm about this Omega Constellation replica?
They show a green sunburst or gradient dial, gold-tone hands and applied baton markers, a black Roman-numeral bezel, four gold-tone claws, a steel-tone case, a date window at 6 o'clock, a transparent back, a green crocodile-pattern strap and a folding clasp. One scale image reads about 119.6 g and one caliper image reads about 44.0 mm.
Does the pictured card match reference 131.23.41.21.10.001?
No. The card and hang tag visibly show 13130412199001, which corresponds to Omega reference 131.30.41.21.99.001, rather than the title reference. They also repeat watch number 80088688. This mismatch must be resolved with exact-unit photographs before payment.
What are the official genuine 131.23.41.21.10.001 specifications?
Omega lists the genuine reference at 41 mm in diameter, 44.00 mm lug-to-lug, 13.50 mm thick and about 114 g, with a steel and yellow-gold case, green dial, green leather strap, Calibre 8900, 60-hour reserve and 5 bar water resistance. Those figures are comparison context, not test results for this replica.
Does the 44.0 mm caliper photo prove the case is oversized?
Not by itself. Omega's official page lists 41 mm case diameter and 44.00 mm lug-to-lug, while the photograph does not clearly label which span the jaws capture. The tool is not shown at zero and there is only one placement. Final QC should measure diameter and lug-to-lug separately and repeat each reading.
Is the sample's approximately 119.6 g weight close to the genuine figure?
It is about 5.6 g above Omega's approximate 114 g specification, based only on the displayed numbers. Scale zero, calibration, protective film and sample configuration are not documented, so the reading should be repeated on the exact unit without loose tags or packaging.
Do the Au750-style mark and gold colour prove solid gold?
No. A photographed stamp and gold-tone surface are visual evidence only. They do not establish alloy, plating thickness, precious-metal content or official origin. Request written material disclosure and, if composition matters, an agreed non-destructive metal test for the exact unit.
Do the movement markings prove a genuine Omega Calibre 8900?
No. A striped rotor and red Master Co-Axial 8900-style text are visible, but decoration cannot prove architecture, parts, certification, magnetic resistance or power reserve. Ask for timegrapher results, continuous winding and setting tests, date change and a timed reserve check.
Is the native video proof of quality?
The existing product record includes a native MP4 and the file responded to a Range request, but the video was not used to make claims in this rewrite. Ask for a fresh continuous clip of the exact watch showing the dial, card mismatch, crown, date, clasp, measurements, movement and timing test.
Which similar Omega replica watches can I compare?
The Constellation 131.33.41.21.01.001 is the closest same-family alternative. The De Ville 434.23.40.20.02.002 offers a more traditional formal strap-watch direction. The Seamaster Aqua Terra 220.10.41.21.03.002 provides a sportier 41 mm Omega comparison.
How should I order this Omega Constellation 131.23.41.21.10.001 replica?
Confirm the title reference, green dial, black Roman-numeral bezel, gold-tone and steel-tone case treatment, green strap, US$478 price and the mismatched 131.30.41.21.99.001 paperwork in writing. A US$20 deposit starts sourcing and exact-unit QC; pay the balance only after the agreed checks match.