Blue horizontal teak-style dial · blue seconds and quarter numerals · loose blue strap kit
Omega Seamaster Aqua Terra 150M 220.10.41.21.03.002 Replica Watch
This Omega Seamaster replica sample closely follows the visual specification of Aqua Terra 220.10.41.21.03.002: a blue horizontal teak/stripe-style dial, blue central seconds hand and blue quarter-minute numerals, date at 6, smooth steel-tone case and steel-tone bracelet. Ten still images also show two loose blue stitched strap sections, a detached clasp and small assembly pieces, plus about 40.0 mm on one calliper setup, about 155 g on one scale and one timing screen at +7 s/day, 244 degrees, 0.1 ms and 28,800. The visual match is strong, but the displayed 28,800 differs from genuine Calibre 8900's official 25,200 vph, so movement and accessory claims remain open. The video was not watched.
Visual similarity does not resolve the beat-rate mismatch
The sample's blue dial details align with OMEGA's exact reference description, but its timing screen displays 28,800 while genuine Calibre 8900 is listed at 25,200 vph. A timegrapher screen alone cannot identify the movement. Obtain the installed movement in writing and connect it to the same blue dial, back and clasp through one cut-free multi-position test.
Evidence boundary
OMEGA's official specifications describe genuine 220.10.41.21.03.002. The photographs describe this replica sample. Visual alignment and OMEGA-, 8900-, stainless-steel-, 150m/500ft-, accessory- and code-style marks cannot prove identity, material, calibre, certification, pressure, accessory compatibility/inclusion, source, serial validity or authenticity.
Strong visual alignment
Blue stripes · blue seconds · blue quarter numbers
The photographed dial and steel-bracelet direction closely follow OMEGA's exact reference description without proving official construction.
Pictured sample
About 40.0 mm · about 155 g
Both are one photographed state and differ from the genuine catalogue's 41 mm and approximately 149 g; recheck on the exact sized unit.
Movement evidence gap
28,800 displayed vs genuine 25,200 vph
The timing screen and 8900-style back text cannot together prove Calibre 8900. Require direct movement disclosure and multi-position timing.
A useful omega seamaster super clone comparison acknowledges the close visual match while keeping size, weight, beat rate and loose-accessory evidence specific to the photographed sample.
Six supporting photo groups
Accessory Parts, Case Profile, Lume, Decorated Back and Timing
The six supporting photographs make the page practical by showing exactly which loose parts and test states exist, without converting them into fit, movement or performance guarantees.
Uninstalled blue strap kit
Two strap sections, one clasp, two connector/link-like pieces and four pin-like pieces are visible. Compatibility, completeness, material, assembly and shipment inclusion need exact-unit confirmation.
Accessory trace markings
The marks help inventory the photographed pieces. They do not prove official manufacture, alloy, correct interface or final inclusion.
Crown-side case profile
Polished and brushed-looking facets, crown, smooth bezel, bracelet and clasp are visible. Threading, setting, sealing, alloy and dimensions remain untested.
Immediate lume-style response
Hands and indexes respond under a handheld light. Without controlled charge and timed decay, the image cannot establish usable duration.
Decorated back as an identity map
Movement-like components and marks are useful for matching later QC to one unit. They do not verify Calibre 8900, steel, 15 bar, certification or authenticity.
One timing state at 28,800
The displayed values are one-position evidence, not a daily guarantee. The beat-rate difference from genuine Calibre 8900 makes direct movement disclosure essential.
Model-linked media retained
Native MP4 Retained Without Borrowing Unseen Claims
The 38,797,245-byte MP4 passed HTTP Range delivery with status 206 and remains embedded. It was not watched, so it adds no evidence for accessory assembly, movement identity, beat rate, crown/date operation, calliper accuracy, weight, timing stability, reserve, lume duration or water resistance. Request a new cut-free exact-unit clip.
Photo-based evidence chain
What the Archive Shows and What Final QC Must Add
Confirmed by still photos
Blue horizontal-stripe date dial, blue seconds hand and quarter numerals, steel-tone case/bracelet, transparent decorated back, two loose blue stitched strap sections, detached clasp, connector/pin-like parts, dates 17 and 18 in separate images, one about 40.0 mm calliper state, one about 155 g scale state, immediate blue/cyan lume-style response and one timing screen at about +7 s/day, 244 degrees, 0.1 ms and 28,800.
Not confirmed
Certified dimensions or weight, final bracelet sizing, accessory compatibility/completeness/inclusion, steel or sapphire, Calibre 8900, true beat rate, multi-position timing, 60-hour reserve, date/time-zone function, lasting lume, crown/clasp operation, 15-bar performance, factory, serial validity or authenticity.
Best next request
Use one uncut film-free sequence connecting the blue dial and chosen date to back, clasp, visible-zero dimensions, weight, complete accessory inventory/installation, controls, movement disclosure, four-position timing, later-reserve timing, timed lume and any agreed pressure test.
Omega replica watch buyer guide
220.10.41.21.03.002 Aqua Terra: Blue Configuration, Measurements, Accessories and QC
The blue details define this Aqua Terra reference
Horizontal blue teak-style stripes, blue central seconds hand, blue 60/15/30/45 minute numerals, polished-looking baton indexes and a 6 o'clock date create the exact visual direction. It is an everyday steel-bracelet layout without a rotating dive bezel.
Visual alignment is strong but has a clear boundary
The OMEGA 220.10.41.21.03.002 page describes the same blue teak pattern, blue seconds hand and quarter numbers, date at 6 and steel bracelet. This supports configuration comparison only; it does not turn a replica sample into official material, movement or certification evidence.
The genuine reference supplies a clean dimensional baseline
OMEGA lists 41 mm diameter, 47.90 mm lug-to-lug, 13.20 mm thickness, 20 mm between lugs and approximately 149 g. Keep every one of those numbers labelled as genuine-reference data until the sample reproduces the matching measurement on camera.
The sample calliper displays about 40.0 mm
The jaws appear to cross the case body and likely exclude the crown, but there is no closed-jaw zero, second axis or repeated placement. The displayed result is about 1.0 mm below the genuine 41 mm catalogue diameter and should be rechecked on the exact order unit.
Record all dimensions in one uninterrupted sequence
Show a visible zero before crown-excluded diameter, maximum crown width, lug-to-lug and true thickness. Keep the blue dial, current date, back marks and clasp visible between axes so the readings cannot be mixed with another sample.
About 155 g is one bracelet-configuration state
The sample scale reads about 155 g, roughly 6 g above OMEGA's approximate 149 g genuine-reference value. Confirm scale zero, installed links, protective film, removed links and final wrist sizing before deciding whether the difference matters.
Steel-tone surfaces do not verify the alloy
The case and bracelet show polished and brushed-looking steel-colour facets. OMEGA specifies steel for the genuine watch, but appearance and STAINLESS STEEL-style accessory marks cannot establish alloy grade, corrosion behaviour, official parts or source.
The back provides several exact-unit anchors
Decorated rotor/bridge shapes, red jewel-like points, 8900-style lettering, Aqua Terra/depth wording and bracelet codes can connect later tests to one sample. Treat them as visual fingerprints, not proof of calibre, certification, pressure or authenticity.
Displayed 28,800 conflicts with genuine Calibre 8900 frequency
OMEGA lists 3.5 Hz or 25,200 vph for genuine Calibre 8900, while the sample screen displays 28,800. A timegrapher can be configured or interpreted incorrectly, so the frame does not identify the movement—but it prevents an evidence-based Calibre 8900 claim from the current archive.
Obtain a written installed-movement disclosure
Ask for movement family, operating rate, regulation method, spare-parts availability and service route. Then film the same blue dial, back and clasp throughout the timing sequence so decorative 8900-style wording cannot replace the disclosure.
One +7 s/day frame is not a daily-wear forecast
The screen also shows 244 degrees and 0.1 ms in one position. Request dial up, dial down, crown up and crown down after settling, report the spread, and repeat near the end of the tested reserve instead of advertising one favourable or unfavourable frame.
Dates 17 and 18 should be linked by one control test
Adjacent dates can be completely normal, so the page does not call this a conflict. A cut-free video should show crown positions, hour-hand or date-setting direction, alignment and the same movement/clasp trace points before and after the date changes.
The genuine time-zone function remains unproven on the sample
OMEGA describes independently adjustable hour-hand behaviour for genuine Calibre 8900. Static images never show crown operation. Do not promise jumping-hour setting, hacking, winding feel or correct date interaction without a continuous demonstration.
The blue strap kit is rich in parts but not assembled
Two stitched woven-texture strap sections, a detached clasp, two small connector/link-like pieces and four pin/spring-bar-like parts appear together. A useful QC clip should inventory every item, install the full set and show articulation, lock security and wrist fit.
Accessory markings are trace data only
OMEGA-, 20-, GJB-, 64-, YF2001779-, 94521883- and stainless-steel-style marks distinguish the photographed pieces. They do not establish official manufacture, material, compatibility, completeness or inclusion in the final shipment.
Immediate lume response needs a fixed decay test
Hands and indexes respond blue/cyan under a handheld light. Keep charge time, light source, distance and camera exposure fixed, then record lights-off and 5-, 15- and 30-minute frames to show persistence rather than only the initial flash.
Fifteen-bar data belongs to the genuine watch
OMEGA rates the genuine reference to 15 bar. The sample's 150m/500ft-style back wording cannot inherit that result. If water use matters, specify test pressure, unit, equipment, hold time, pass rule and post-test crown/movement checks on the exact assembled watch.
Search phrases should lead to measurable evidence
omega copy watch, omega super clone, omega seamaster super clone, omega seamaster replica and high quality omega replica watches are discovery phrases from the supplied workbook. Here they route to the exact blue configuration, measurements, beat-rate issue and accessory checklist instead of unsupported quality claims.
Compare three nearby Seamaster directions
Choose the 220.10.41.21.01.001 black striped Aqua Terra listing to keep the same older 41 mm everyday architecture in black, review the 220.10.41.21.01.002 glossy-black official-reference direction for a newer dial and bracelet concept while respecting its current photo warning, or use the 215.30.44.21.01.002 Planet Ocean listing for a larger black/orange diving-bezel profile. Verify each sample independently.
The retained MP4 adds availability only
The 38,797,245-byte video returned a valid 206 byte-range response and remains embedded. It was not watched, so no statement about accessory assembly, controls, movement, timing stability, reserve, lume duration or pressure comes from unseen footage.
Finish with one exact-unit proof chain
Begin with the blue dial and chosen date, then move without cuts to back, clasp, zeroed dimensions, scale and complete accessory installation. Continue through crown/date operation, movement disclosure, four-position timing, reserve, timed lume and any agreed pressure test.
Related model comparisons
Three Seamaster Alternatives by Dial Colour and Case Direction
These linked pages move from blue to two black Aqua Terra treatments or to a larger black/orange rotating-bezel Planet Ocean profile.
Black horizontal-stripe sibling
Aqua Terra 220.10.41.21.01.001
Choose this older black Aqua Terra reference to keep the 41 mm horizontal teak-style dial and steel-bracelet direction while changing colour.
Newer glossy-black direction
Aqua Terra 220.10.41.21.01.002
This official-reference direction uses a glossy black dial and newer bracelet concept; its current listing photos require configuration confirmation before ordering.
Larger diving-bezel profile
Planet Ocean 215.30.44.21.01.002
Use this alternative for a larger steel-bracelet case with black/orange rotating-bezel styling rather than the cleaner Aqua Terra dial.
How Time-mimic Should Handle Your Aqua Terra 220.10.41.21.03.002 Inquiry
The visual reference match is clear, but size, weight, beat-rate and accessory installation still belong to the exact sample. Build approval around one continuously documented watch.
1 · Confirm the blue configuration
Record blue horizontal stripes, blue seconds/quarter numerals, steel bracelet, wrist size and every promised blue-strap/clasp/connector part at the current $567 price.
2 · Repeat measurements and install accessories
Show the same dial, back and clasp while recording visible-zero dimensions, scale zero, full-link state and a complete alternate-strap assembly/fit test.
3 · Resolve movement and performance
Add written movement disclosure, crown/date operation, four-position timing, later-reserve timing, timed lume and any agreed pressure result before approval.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for the movement, date, crown, steel bracelet, blue strap, clasp, connectors and any accepted timing or pressure result.
Flexible options
Deposit, QC & Final Payment
After the configuration, sample evidence and requested tests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm the exact reference, visible configuration and wrist sizing
- 2. Confirm $567 and pay US$20 deposit to start sourcing/QC
- 3. Review fresh measurements, controls, movement, timing, reserve and requested tests
- 4. Pay balance only after exact-unit approval; then shipment begins
Blue configuration, dimensions, weight, beat rate, loose accessories and order questions
Omega Aqua Terra 220.10.41.21.03.002 Replica Watch FAQ
What configuration do the ten photographs show?
They show a blue horizontal stripe-style date dial with blue seconds hand and quarter-minute numerals, steel-tone case and bracelet, transparent decorated back, two loose blue stitched strap sections, a detached clasp, small connector-like pieces and four pin-like parts. Materials, assembly and functions remain subject to exact-unit proof.
Do the sample photos match genuine 220.10.41.21.03.002 visually?
The blue horizontal teak-style dial, blue seconds hand and quarter numbers, 6 o'clock date and steel-bracelet direction align closely with OMEGA's description. Visual alignment is useful for configuration selection but does not prove authenticity, official components, alloy, sapphire, calibre or water resistance.
Is the photographed sample really 41 mm?
The single calliper image displays about 40.0 mm across a case-body-style span that appears likely to exclude the crown. OMEGA lists 41 mm for the genuine reference. Because no visible zero or repeat is shown, request crown-excluded diameter, lug-to-lug and thickness again on the exact unit.
Why does the sample show about 155 g when OMEGA lists about 149 g?
The figures come from different evidence sources: one sample scale image versus an approximate genuine-reference catalogue weight. The roughly 6 g difference can be affected by bracelet sizing, protective film and scale setup, so it is a QC cue rather than construction proof.
Does the 8900-style transparent back prove Calibre 8900?
No. OMEGA lists genuine Calibre 8900 at 25,200 vph, while the sample timegrapher screen displays 28,800. A single setting/readout does not identify the movement, but the mismatch requires a written movement disclosure and continuous multi-position test.
Is +7 seconds per day a guaranteed accuracy figure?
No. About +7 s/day, 244 degrees, 0.1 ms and 28,800 describe one displayed state only. They do not establish the true beat rate, positional spread, repeatability, regulation quality, reserve or performance after shipping.
Do dates 17 and 18 indicate a problem?
Not by themselves. Separate stills can show different dates after ordinary adjustment or rollover. Ask for one cut-free sequence that shows crown positions, date/hour-hand operation, alignment and the same back/clasp trace points before and after the change.
Are the loose blue strap, clasp and pins guaranteed to fit and ship?
No. The parts are photographed but never installed as a complete wearing system. Confirm interface, width, length, material, clasp assembly, every connector/pin, wrist fit and written inclusion on the exact order.
Does the blue/cyan lume-style image prove lasting brightness?
No. It shows immediate response while a handheld light is applied. There is no controlled charge protocol or timed decay. Ask for identical exposures at lights-off, 5, 15 and 30 minutes if lasting legibility matters.
Was the retained product video watched for this rewrite?
No. The 38,797,245-byte MP4 remains embedded and passed HTTP Range delivery with status 206. Every sample statement comes from the ten inspected stills; request a new cut-free exact-unit clip for measurements, accessory assembly, controls and performance.