Black horizontal-stripe dial · steel-tone bracelet · sample 40.0 mm / 155.2 g / 28,800 evidence
Omega Seamaster Aqua Terra 150M 220.10.41.21.01.001 Replica Watch
This Omega Seamaster replica sample follows the black horizontal-stripe Aqua Terra layout with baton indexes, a 6 o'clock date, steel-tone case and butterfly-style bracelet, plus a transparent decorated back. Ten still images add unusually useful buying evidence: about 40.0 mm on one calliper setup, about 155.2 g on one scale and one timing screen at about -5 s/day, 267 degrees, 0.2 ms and 28,800. Those sample states differ from the genuine reference's 41 mm, approximately 149 g and Calibre 8900 frequency of 25,200 vph, so the page keeps sample proof and official data separate. The video was not watched.
Do not infer Calibre 8900 from the decorated back
The sample back carries 8900-style wording, but its timegrapher display shows 28,800 while OMEGA lists genuine Calibre 8900 at 25,200 vph. A screen setting or single reading is not a movement identification; request the installed movement in writing and connect it to the same dial, back and clasp in one cut-free four-position timing sequence.
Evidence boundary
OMEGA's official specifications describe genuine 220.10.41.21.01.001. The photographs describe this replica sample. Steel-tone appearance and OMEGA-, 8900-, BARREL ONE/TWO-, stainless-steel-, 150m/500ft- and code-style marks cannot prove material, calibre, frequency, certification, pressure, source, serial validity or authenticity.
Exact genuine context
41 mm · 13.20 mm · about 149 g
OMEGA lists 47.90 mm lug-to-lug, 20 mm lugs, steel, Calibre 8900, 60 hours, 25,200 vph and 15 bar for the genuine reference.
Pictured sample
About 40.0 mm · about 155.2 g
One zero-unshown calliper state and one scale state differ from the genuine catalogue figures; verify them again on the exact sized unit.
Movement evidence gap
28,800 displayed vs genuine 25,200 vph
The timing screen and 8900-style back wording do not agree with an evidence-based genuine Calibre 8900 identity. Obtain a written movement disclosure and continuous tests.
A useful omega seamaster super clone comparison preserves all three sample states—size, weight and timing—while keeping genuine-reference specifications in a separate, clearly labelled column.
Six supporting photo groups
Case Profile, Butterfly Clasp, Measurements, Lume and Timing
The six supporting photographs make this listing more useful because they expose trace details and measured states, while leaving material, movement and functional claims open for exact-unit QC.
Crown-side case profile
Case facets, crown, smooth bezel, lugs, bracelet articulation and clasp profile are visible. Threading, winding, setting, sealing, alloy and dimensions are not established by this angle.
Butterfly-style clasp exterior
Logo-style presentation and protective film are visible. Release, relock, pull security, edge finish, link count, material and durability still need direct checks.
Clasp markings as trace points
JD, STZ006975, STAINLESS STEEL, 11 and logo-style marks can help match one unit. They are not proof of genuine hardware, steel grade, factory or provenance.
One about 40.0 mm calliper state
The setup appears likely to exclude the crown but lacks a visible zero and repeat. It is about 1.0 mm below the genuine 41 mm catalogue diameter and needs exact-unit confirmation.
Decorated movement close-up
Rotor, bridge pattern, red jewel-like points and multiple markings are identity anchors only. They cannot establish calibre architecture, beat rate, reserve, certification or authenticity.
One timing screen and second date state
The display is a single-position snapshot, not a movement ID or stability test. Date 31 versus 30 in another still is best resolved by a continuous crown/date sequence.
Model-linked media retained
Native MP4 Retained Without Borrowing Unseen Claims
The 34,511,587-byte MP4 passed HTTP Range delivery with status 206 and remains embedded. It was not watched, so it contributes no evidence for movement identity, beat rate, date operation, calliper accuracy, weight, crown/clasp function, timing stability, reserve, lume duration or water resistance. Request a new cut-free exact-unit clip.
Photo-based evidence chain
What the Archive Shows and What Final QC Must Add
Confirmed by still photos
Black horizontal-stripe date-dial styling, steel-tone case and bracelet, butterfly-style clasp, transparent decorated back, dates 30 and 31 in separate stills, one about 40.0 mm calliper state, one about 155.2 g scale state, immediate blue/cyan lume-style response and one timing screen at about -5 s/day, 267 degrees, 0.2 ms and 28,800.
Not confirmed
Certified dimensions or weight, full-link configuration, steel or sapphire composition, Calibre 8900, true beat rate, multi-position timing, 60-hour reserve, date/time-zone function, lasting lume, crown/clasp operation, 15-bar performance, factory, serial validity or authenticity.
Best next request
Use one uncut film-free sequence connecting the chosen date, back marks and clasp to zeroed dimensions, weight, crown/date operation, movement disclosure, four-position timing, later-reserve timing, timed lume and any agreed pressure test.
Omega replica watch buyer guide
220.10.41.21.01.001 Aqua Terra: Size, Weight, Beat Rate and Exact-Unit QC
This is the horizontal-stripe black Aqua Terra direction
The defining visual is the black dial with horizontal teak/stripe-style texture, polished-looking baton indexes, broad arrow-style minute hand and date at 6. A smooth steel-tone bezel and integrated-looking steel-tone bracelet keep it closer to an everyday sport-watch profile than a rotating-bezel dive watch.
Keep exact official data in a separate comparison column
The OMEGA 220.10.41.21.01.001 page lists the genuine watch at 41 mm diameter, 47.90 mm lug-to-lug, 13.20 mm thickness, 20 mm between lugs and approximately 149 g. Those numbers do not become sample specifications without matching measurements.
The sample's calliper shows about 40.0 mm
The jaws span the case-body area and appear likely to exclude the crown, but the archive does not show a visible zero, a second axis or a repeat. Record the result as one approximately 40.0 mm sample state—about 1.0 mm below the genuine catalogue diameter—not as certified manufacturing tolerance.
Measure diameter, length and thickness without a cut
Request a visible closed-jaw zero, then crown-excluded diameter, maximum crown width, lug-to-lug and true thickness. Keep the date, back marks and clasp visible while moving between views so the measurement cannot be borrowed from another Aqua Terra sample.
The scale displays about 155.2 g
That photographed sample state sits about 6.2 g above OMEGA's approximate 149 g genuine-reference figure. Before treating the difference as construction evidence, confirm scale zero, full-link count, removed links, protective film and whether any tag or support material touches the scale.
Appearance cannot verify the steel alloy
Case, bracelet and clasp have a steel-colour appearance with polished and brushed-looking surfaces. The genuine reference is officially steel, but the sample's look and STAINLESS STEEL-style clasp text cannot establish alloy grade, corrosion behaviour, machining source or official parts.
The decorated back is useful for identity tracking
The rotor shape, red jewel-like points, BARREL ONE/TWO wording, 8900-style text, wave-like finishing and surrounding codes give several exact-unit anchors. Keep them in frame during later tests; do not promote them into proof of calibre, architecture, certification or authenticity.
The beat-rate mismatch needs a direct answer
OMEGA lists genuine Calibre 8900 at 3.5 Hz or 25,200 vph. The sample's one timing screen displays 28,800. Because a timegrapher may be configured or read incorrectly, the screen alone does not identify the installed movement—but it directly prevents an evidence-based Calibre 8900 claim from the current archive.
Ask the seller to name the installed movement
The answer should include movement family, beat rate, regulation access, parts availability and service route. Then connect the same dial, back and clasp to an uninterrupted timing sequence so decorative 8900-style marks cannot substitute for the movement disclosure.
One timing position is only a snapshot
About -5 s/day, 267 degrees and 0.2 ms are visible on one screen. They do not show repeatability or positional spread. Ask for dial up, dial down, crown up and crown down after settling, followed by a later repeat near the end of the tested reserve interval.
Dates 30 and 31 are a continuity checkpoint
The front view shows 30 and the timegrapher view shows 31. Adjacent dates can be entirely normal, so the page does not label this a fault. A cut-free control clip should show crown positions, adjustment direction, alignment and the same physical watch before and after the date changes.
The genuine time-zone function is not demonstrated
OMEGA describes an independently adjustable hour-hand time-zone function for the genuine Calibre 8900. The sample stills never show crown operation. Do not promise jumping-hour behaviour, quick date interaction, hacking or smooth winding without a continuous control test.
Immediate lume response is not a duration test
Hands and indexes show a blue/cyan luminous-style response while a light is applied. To compare usable persistence, fix charge time, light source, distance and camera exposure, then photograph immediately and at 5, 15 and 30 minutes in the same dark setup.
Butterfly-clasp presentation needs functional follow-up
Exterior and interior views show logo-, reference- and stainless-steel-style marks, plus protective film. Verify both release points, positive relock, pull security, bracelet articulation, edge finish, full-link count and clasp centring after the bracelet is sized.
The crown and sealing remain untested
A crown-side profile makes the case facets and right crown visible, but static images do not demonstrate threading, winding, setting, gasket condition or sealing. If water use matters, agree pressure, units, equipment, hold time, pass rule and post-test checks in writing.
A 150m-style inscription is not a pressure result
OMEGA rates the genuine reference to 15 bar. The sample's dial or caseback wording cannot inherit that result. Treat the replica as unverified around water unless the exact assembled watch passes an agreed test after crown and caseback closure.
Search phrases should lead to concrete sample proof
omega copy watch, omega super clone, omega seamaster super clone, omega seamaster replica and high quality omega replica watches are discovery phrases from the supplied workbook. On this page they lead to model-specific dimensions, weight, beat-rate evidence and a practical QC request—not unsupported quality labels.
The retained MP4 contributes availability only
The 34,511,587-byte file returned a valid 206 byte-range response and stays embedded for customer access. It was not watched, so no statement about movement, date change, crown, clasp, timing stability, lume duration, reserve or water resistance comes from unseen footage.
Compare three nearby Seamaster directions
Choose the 220.10.41.21.01.002 black Aqua Terra listing for a newer glossy-black dial direction, the 220.10.41.21.03.002 blue Aqua Terra listing to keep the steel-bracelet everyday format with a blue dial, or the 215.30.44.21.01.002 Planet Ocean listing for a larger black/orange diving-bezel profile. Verify every sample independently.
Build one exact-unit evidence chain before payment
Start film-free with the chosen dial date, then move without cuts to the back marks, clasp, zeroed dimensions and weight. Continue through crown/date operation, movement disclosure, four-position timing, reserve, timed lume and any agreed pressure result while unique trace points remain visible.
Related model comparisons
Three Seamaster Alternatives by Dial Finish, Colour and Case Direction
These linked pages help decide whether you want a newer glossy-black Aqua Terra, a blue Aqua Terra or a larger rotating-bezel Planet Ocean profile.
Newer glossy-black sibling
Aqua Terra 220.10.41.21.01.002
Choose this sibling to compare a newer glossy-black dial treatment while retaining a 41 mm steel-bracelet Aqua Terra direction.
Blue Aqua Terra sibling
Aqua Terra 220.10.41.21.03.002
Use this page to keep the everyday steel-bracelet Aqua Terra format while moving from black horizontal stripes to a blue-dial direction.
Larger diving-bezel profile
Planet Ocean 215.30.44.21.01.002
This alternative adds a larger black/orange Planet Ocean case, rotating-bezel look and heavier steel-bracelet presence.
How Time-mimic Should Handle Your Aqua Terra 220.10.41.21.01.001 Inquiry
The visual configuration and three sample measurements are useful, but the beat-rate mismatch means movement identity must stay open until one exact watch is documented continuously.
1 · Choose the exact configuration
Confirm the black horizontal-stripe dial, date at 6, steel-tone bracelet, wrist size and written accessory list at the current $567 price.
2 · Repeat dimensions and weight
Show the same date, back and clasp while recording a visible calliper zero, all main case axes, scale zero, full-link state and final sized weight.
3 · Resolve movement and function evidence
Add installed-movement disclosure, crown/date operation, four-position timing, later-reserve timing, timed lume and any agreed pressure result before final approval.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for the movement, date, crown, bracelet, clasp and any accepted timing or pressure result.
Flexible options
Deposit, QC & Final Payment
After the configuration, sample evidence and requested tests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm the exact reference, visible configuration and wrist sizing
- 2. Confirm $567 and pay US$20 deposit to start sourcing/QC
- 3. Review fresh measurements, controls, movement, timing, reserve and requested tests
- 4. Pay balance only after exact-unit approval; then shipment begins
Sample dimensions, weight, beat-rate mismatch, date states, lume and order questions
Omega Aqua Terra 220.10.41.21.01.001 Replica Watch FAQ
What exact configuration appears in the ten photographs?
They show a black horizontal teak/stripe-style dial, baton indexes, date at 6, steel-tone case and bracelet, butterfly-style clasp, transparent decorated back, immediate blue/cyan lume-style response, one calliper state, one scale state and one timegrapher state. Materials and functions remain subject to exact-unit proof.
Is the photographed sample really 41 mm?
The single calliper image reads about 40.0 mm across a case-body-style span that appears likely to exclude the crown. OMEGA lists 41 mm for the genuine reference. Because the sample image has no visible zero or repeat, request a zeroed crown-excluded diameter plus lug-to-lug and thickness on the exact unit.
Why does the sample weigh about 155.2 g when OMEGA lists about 149 g?
The figures come from different evidence sources: 155.2 g is one photographed sample scale state, while 149 g is OMEGA's approximate genuine-reference catalogue weight. Bracelet sizing, protective film and scale verification matter, so the roughly 6.2 g difference is a comparison cue rather than proof of construction.
Does the 8900-style back text prove Calibre 8900?
No. OMEGA lists genuine Calibre 8900 at 3.5 Hz or 25,200 vph, while the sample timegrapher screen displays 28,800. A screen setting or single readout does not identify a movement, but this mismatch makes a seller movement disclosure and continuous multi-position timing essential.
What does the one timegrapher image actually prove?
It documents one displayed state of about -5 seconds per day, 267 degrees, 0.2 ms and 28,800. It does not establish the true beat rate, four-position performance, repeatability, regulation quality, service condition or behaviour near the end of reserve.
Do the dates 30 and 31 indicate a problem?
Not by themselves. Separate stills show two adjacent date states that could result from normal adjustment or rollover. The useful buyer check is a cut-free sequence showing crown positions, hour-hand or date-setting behaviour, alignment and the same back and clasp before and after the change.
Is the blue/cyan glow proven to last overnight?
No. One image shows an immediate luminous-style response while a handheld light is applied. There is no dark-adaptation baseline or timed decay series. Ask for consistent exposures at lights-off, 5, 15 and 30 minutes if lasting legibility matters.
Are the sample's stainless-steel and 150m markings reliable specifications?
No. They help trace the photographed unit but do not verify alloy grade, sapphire, gasket condition, 15-bar performance, factory, serial validity or authenticity. Material and water-use claims require separate documentation and an agreed test on the exact watch.
What should be checked on the butterfly-style clasp?
Confirm release, relock, pull security, link condition, sizing range, edge finish and centring on the wrist. Protective film and logo-style marks show presentation state only; they do not establish steel grade, genuine hardware or long-term durability.
Was the retained product video watched for this rewrite?
No. The 34,511,587-byte MP4 remains embedded and passed HTTP Range delivery with status 206. Every sample statement comes from the ten inspected still images; ask for a new cut-free exact-unit QC clip to close the dimensional, movement, date, clasp and control gaps.