Blue world map · city and 24-hour rings · 43.0 mm / 178.3 g sample evidence
Omega Seamaster Aqua Terra Worldtimer 220.10.43.22.03.001 Replica Watch
This Omega Seamaster replica sample follows the blue Aqua Terra Worldtimer layout with a central Earth image, surrounding 24-hour scale, outer city ring, red LONDON name, date at 6 and a steel-tone bracelet. Ten still images document the crown profile, clasp, decorated 8938-style back, immediate lume-style response and three useful sample states: about 43.0 mm, about 178.3 g and one timing screen at +10 s/day, 272 degrees, 0.0 ms and 28,800. The size display numerically matches the genuine 43 mm catalogue figure, but the weight is roughly 15.3 g higher and 28,800 differs from genuine Calibre 8938's official 25,200 vph. Static photos do not prove Worldtimer operation. The video was not watched.
A Worldtimer dial must be tested as a system
The map, cities and 24-hour ring are visible, but stills do not show synchronized destination times, independent-hour adjustment, 24-hour motion or date interaction. Request one cut-free setting sequence on the exact watch. Keep the same back and clasp visible, because 8938-style text plus a 28,800 timing screen cannot establish genuine Calibre 8938 architecture.
Evidence boundary
OMEGA's official specifications describe genuine 220.10.43.22.03.001. The photographs describe this replica sample. Visual similarity plus city, map, 8938-, steel-, depth- and code-style details cannot prove world-time operation, titanium/glass/laser process, material, calibre, frequency, certification, pressure, source, serial validity or authenticity.
Worldtimer dial architecture
Earth map · city ring · 24-hour scale
The photographs clearly show the travel-dial layout; a continuous crown and 24-hour advancement test is still required for function.
Pictured sample
About 43.0 mm · about 178.3 g
The diameter matches the catalogue number only visually; the weight is about 15.3 g above OMEGA's approximate genuine-reference figure.
Movement evidence gap
28,800 displayed vs genuine 25,200 vph
One timegrapher screen and 8938-style back text do not prove Calibre 8938. Obtain direct disclosure and multi-position timing.
A useful omega seamaster super clone page separates visible Worldtimer graphics from demonstrated Worldtimer operation, and keeps sample measurements distinct from genuine catalogue specifications.
Six supporting photo groups
Case Profile, Clasp Hardware, Lume, Movement Marks and Timing
The six supporting photographs add exact-unit trace details, but none replaces a continuous demonstration of the complication or a controlled performance test.
Crown-side profile
The crown, smooth bezel, case facets, bracelet and clasp are visible. Threading, winding, setting, world-time control and sealing remain untested.
Butterfly-style clasp exterior
Logo-style presentation and protective film are visible. Release, relock, pull security, material, link count and durability require direct checks.
Clasp trace markings
The markings help reconnect later tests to the same hardware. They do not prove official manufacture, steel grade, factory or authenticity.
Immediate lume-style response
Several dial areas respond under a handheld light. Without fixed charge and timed decay, persistence remains unknown.
Decorated back as an identity map
Movement-like components and markings are useful visual anchors. They cannot verify Calibre 8938, beat rate, materials, pressure, certification or authenticity.
One timing state at 28,800
This is one-position evidence, not a daily guarantee or movement ID. The beat-rate difference from genuine 8938 demands a written disclosure.
Model-linked media retained
Native MP4 Retained Without Borrowing Unseen Claims
The 13,839,677-byte MP4 passed HTTP Range delivery with status 206 and remains embedded. It was not watched, so it adds no evidence for world-time synchronization, independent-hour/date operation, movement identity, calliper accuracy, weight, timing stability, reserve, lume duration, clasp function or water resistance. Request a new cut-free exact-unit clip.
Photo-based evidence chain
What the Archive Shows and What Final QC Must Add
Confirmed by still photos
Blue Worldtimer-style map/city/24-hour layout, red LONDON, date 2, steel-tone case/bracelet, butterfly-style clasp, transparent decorated 8938-style back, one about 43.0 mm calliper state, one about 178.3 g scale state, immediate blue/cyan lume-style response and one timing screen at about +10 s/day, 272 degrees, 0.0 ms and 28,800.
Not confirmed
World-time/GMT synchronization, independent-hour/date operation, map titanium/glass/laser process, certified dimensions or weight, steel or sapphire, Calibre 8938, true beat rate, multi-position timing, 60-hour reserve, lasting lume, crown/clasp operation, 15-bar performance, factory, serial validity or authenticity.
Best next request
Use one uncut film-free sequence connecting the map, city ring, 24-hour ring and date to the back/clasp, zeroed dimensions, weight, world-time controls, movement disclosure, four-position timing, later-reserve timing, timed lume and any agreed pressure test.
Omega replica watch buyer guide
220.10.43.22.03.001 Worldtimer: Dial Operation, Weight, Beat Rate and Exact-Unit QC
The Worldtimer dial is the reason to choose this model
A central Earth image, a surrounding 24-hour ring and an outer ring of cities turn the dial into a travel-oriented display. Red LONDON, multiple global destinations and a 6 o'clock date give this page a more information-dense identity than a conventional three-hand Aqua Terra.
Use OMEGA's exact dial description as genuine context
The OMEGA 220.10.43.22.03.001 page specifies a sun-brushed blue exterior with vertical teak stripes, colour-coded destinations, a glass day/night ring and a laser-ablated grade 5 titanium Earth plate. The sample photos show a similar visual scheme without proving those materials or processes.
Visible world-time graphics are not functional proof
The still archive never shows the 24-hour ring moving, city indications remaining synchronized, independent hour adjustment or correct date interaction. Describe the graphics accurately, then leave GMT/Worldtimer operation open until one continuous setting sequence demonstrates it.
Request a practical Worldtimer control sequence
Start at a clearly chosen home-city/time state, show the crown position and adjustment direction, advance through several hours and across midnight, and keep the city ring, 24-hour ring, date, back and clasp visible. End by confirming the displayed home and destination times.
The 43.0 mm sample reading matches the catalogue number
OMEGA lists 43 mm and the sample calliper shows about 43.0 mm. That is useful preliminary evidence, but no visible closed-jaw zero or repeated placement exists. Similar digits do not prove identical measuring axes, tolerance, case construction or reference identity.
Complete the other three case measurements
OMEGA's genuine data also list 50.30 mm lug-to-lug, 14.12 mm thickness and 21 mm between lugs. Re-measure crown-excluded diameter, maximum crown width, lug-to-lug and true thickness without cuts while the dial and back trace marks remain identifiable.
The scale displays about 178.3 g
That one bracelet-configuration state is roughly 15.3 g above OMEGA's approximate 163 g genuine-reference weight. Confirm scale zero, installed and removed link count, protective film and final sizing before using the difference to discuss wearing feel.
Steel-tone appearance cannot verify the alloy
Polished and brushed-looking surfaces appear on the case, bracelet and clasp. OMEGA specifies steel for the genuine watch, but the sample's appearance and STAINLESS STEEL-style clasp text cannot establish alloy grade, corrosion behaviour, official parts or source.
The transparent back is useful for exact-unit tracking
Decorated rotor/bridge forms, red jewel-like points, 8938-style lettering, BARREL ONE wording, Aqua Terra/depth text and code marks create a visual fingerprint. Keep those details in later footage; do not treat them as calibre, certification or authenticity proof.
Displayed 28,800 conflicts with genuine Calibre 8938 frequency
OMEGA lists genuine 8938 at 3.5 Hz or 25,200 vph; the sample screen displays 28,800. A timegrapher may be configured or interpreted incorrectly, so the frame alone cannot name the movement. It nevertheless prevents a supported Calibre 8938 claim from the current archive.
Movement disclosure must cover the world-time mechanism
Ask for the movement family, beat rate, method used to drive the 24-hour ring, independent-hour behaviour, service parts and repair route. Then connect that explanation to the same back and dial in one uninterrupted control and timing sequence.
One +10 s/day state is not a finished QC result
The timing screen also shows 272 degrees and 0.0 ms in one position. Record dial up, dial down, crown up and crown down after settling, compare spread, and repeat near the end of reserve. A single frame cannot predict daily wear.
Reserve matters more on a complication-heavy dial
OMEGA lists 60 hours for the genuine reference, but the sample has no reserve interval. Fully wind the exact watch, record all indications, leave it undisturbed, and repeat timing and dial-state checks at agreed intervals until stop.
Map material and laser process remain unverified
The sample Earth image has relief-looking continents and blue areas, but photography cannot distinguish grade 5 titanium, plating, printing, applied layers or laser ablation. Keep the official material/process description strictly in the genuine-reference column.
Immediate illumination is not a duration result
Hands, indexes and some map/scale areas show blue/cyan response under a handheld light. Fix the light source, distance, charge time and camera exposure, then photograph lights-off plus 5, 15 and 30 minutes to compare persistence fairly.
Clasp markings should stay trace-only
The clasp interior shows UB, STZ007224, STAINLESS STEEL, 11 and OMEGA-style marks. They help confirm that later clasp tests use the same hardware; they cannot prove official origin, steel grade, factory or durability.
Test the butterfly-style clasp after sizing
Show both releases, positive relock, pull security, edge finish, bracelet articulation and clasp centring on the wrist. Record the full-link count and any removed links so the final weight and fit remain interpretable.
Fifteen-bar data belongs to the genuine watch
OMEGA rates the genuine reference to 15 bar. The sample's 150m/500ft-style marks cannot inherit that result. If water use matters, define pressure, unit, equipment, hold time, pass rule and post-test crown/movement checks on the exact assembled watch.
Search phrases should lead to complication-specific proof
omega copy watch, omega super clone, omega seamaster super clone, omega seamaster replica and high quality omega replica watches are discovery phrases from the supplied workbook. Here they lead to city-ring operation, sample measurements, beat-rate evidence and a Worldtimer QC sequence—not unsupported labels.
Compare three different Seamaster use cases
Use the 220.12.43.22.03.002 Worldtimer-style strap listing to compare a 43 mm travel-dial direction with a different wearing system, the 220.10.41.21.03.002 blue 41 mm Aqua Terra listing for a cleaner everyday dial and lighter visual footprint, or the 215.30.44.21.01.002 Planet Ocean listing for a black/orange rotating-bezel dive direction. Verify each sample independently.
The retained MP4 adds access but no unseen evidence
The 13,839,677-byte file returned a valid 206 byte-range response and remains embedded. It was not watched, so it does not support claims about world-time operation, dimensions, movement, timing stability, reserve, lume duration, clasp or pressure.
Finish with one continuous exact-unit proof chain
Connect the world map, city ring and date to the back and clasp, then record zeroed dimensions, weight, crown/date/world-time operation, movement disclosure, four-position timing, reserve, timed lume and any agreed pressure result without switching watches.
Related model comparisons
Three Seamaster Alternatives by Complication and Wearing Direction
These linked pages compare another 43 mm Worldtimer-style wearing system, a simpler blue Aqua Terra and a larger black/orange dive direction.
Worldtimer on strap direction
Aqua Terra 220.12.43.22.03.002
Choose this sibling to compare a 43 mm Worldtimer-style dial with a strap-based wearing system rather than the current steel bracelet.
Simpler blue Aqua Terra
Aqua Terra 220.10.41.21.03.002
This 41 mm direction keeps blue and a steel bracelet while replacing the map/city/24-hour layout with a cleaner three-hand date dial.
Black/orange dive profile
Planet Ocean 215.30.44.21.01.002
Use this alternative for a larger rotating-bezel dive appearance instead of travel-oriented Worldtimer graphics.
How Time-mimic Should Handle Your Worldtimer 220.10.43.22.03.001 Inquiry
The map/city dial is visible and the diameter reading is useful, but the complication, movement and full performance remain unverified. Approve one physical watch only after a continuous functional chain.
1 · Confirm the Worldtimer configuration
Record the blue map/city/24-hour dial, date, steel bracelet, wrist size and written accessory list at the current $627 price.
2 · Prove controls and measurements continuously
Show the same dial, back and clasp while recording visible-zero dimensions, scale zero, world-time/hour/date setting and final bracelet sizing.
3 · Complete movement and performance QC
Add installed-movement disclosure, four-position timing, later-reserve timing, timed lume and any agreed pressure result before final approval.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for the movement, world-time/24-hour display, date, crown, bracelet, clasp and any accepted timing or pressure result.
Flexible options
Deposit, QC & Final Payment
After the configuration, sample evidence and requested tests are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh media connects every approved detail to one physical watch.
- 1. Confirm the exact reference, visible configuration and wrist sizing
- 2. Confirm $627 and pay US$20 deposit to start sourcing/QC
- 3. Review fresh measurements, controls, movement, timing, reserve and requested tests
- 4. Pay balance only after exact-unit approval; then shipment begins
Worldtimer operation, dimensions, weight, beat rate, map materials and order questions
Omega Aqua Terra Worldtimer 220.10.43.22.03.001 Replica Watch FAQ
What configuration do the ten photographs show?
They show a blue Worldtimer-style dial with central world map, 24-hour scale, city ring, red London name, date at 6, steel-tone case and bracelet, butterfly-style clasp and transparent decorated back. One calliper, scale, lume-style and timegrapher state are also visible.
Do the map, city ring and 24-hour ring prove a working Worldtimer?
No. Static photos confirm the visible layout only. They do not show that the 24-hour ring advances correctly, cities stay synchronized, the hour hand adjusts independently or the date follows the intended sequence. Request one uninterrupted setting and 24-hour advancement demonstration.
Does the sample match the genuine 43 mm diameter?
Its one calliper display reads about 43.0 mm across a case-body-style span that appears likely to exclude the crown, matching OMEGA's 43 mm figure numerically. Without a visible zero, repeat, lug-to-lug or thickness reading, this is not certified dimensional equivalence.
Why is the sample about 178.3 g when OMEGA lists about 163 g?
The sample and catalogue figures come from different evidence sources. The roughly 15.3 g difference can reflect bracelet construction, sizing, protective film and scale setup. Repeat a zeroed weighing with full-link count and final wrist configuration before drawing conclusions.
Does the 8938-style transparent back prove Calibre 8938?
No. OMEGA lists genuine Calibre 8938 at 25,200 vph, while the sample timegrapher displays 28,800. A single screen setting/readout does not identify the movement, but the mismatch requires a written movement disclosure and continuous multi-position timing.
Is +10 seconds per day the watch's guaranteed accuracy?
No. About +10 s/day, 272 degrees, 0.0 ms and 28,800 describe one displayed position only. They do not establish repeatability, positional spread, regulation quality, reserve, world-time behaviour or performance after shipping.
Is the central map proven to be laser-ablated grade 5 titanium?
No. That material and process belong to OMEGA's genuine-reference description. The sample shows a relief-looking coloured map, but photographs cannot establish titanium grade, laser treatment, surface durability, glass composition or common construction.
Does the illuminated photo prove lasting lume?
No. It records immediate blue/cyan response on hands, indexes and some dial areas while a handheld light is applied. There is no fixed charge protocol or timed decay. Ask for identical exposures at lights-off, 5, 15 and 30 minutes.
Do stainless-steel and 150m-style marks prove material or water resistance?
No. They are useful trace points but cannot verify alloy grade, sapphire, gasket condition, 15-bar performance, factory, serial validity or authenticity. Material documents and pressure testing must be agreed separately for the exact watch.
Was the retained product video watched for this rewrite?
No. The 13,839,677-byte MP4 remains embedded and passed HTTP Range delivery with status 206. Every sample claim comes from the ten inspected stills; request a new cut-free exact-unit clip for world-time operation, dimensions, movement and performance.