Audemars Piguet · Royal Oak Custom · Choose One Configuration
Audemars Piguet Royal Oak Custom Configuration Replica Watch
This photo archive contains two different Royal Oak-style custom samples—not ten views of one watch. Configuration A is a clean steel-tone, black square-pattern-dial time/date sample with a solid back and 36.2 mm pictured width. Configuration B is a full clear-stone pavé-style time/date sample with an exhibition back, decorated automatic-looking movement, 40.0 mm pictured width and 12.2 mm pictured thickness. The starting price remains US$776, but the selected base watch, movement, stones, setting coverage and finishing must be priced and verified separately.
Do not combine the two samples
A uses a black grid dial, clean bracelet and solid back; B uses a pavé-style dial/case/bracelet and exhibition back. Their 36.2 mm and 40.0 mm readings are not two measurements of one watch. Choose A or B before deposit and request new QC for that exact configuration.
PHOTO-ONLY ARCHIVE
No Matching Product Video Is Published for This Custom Page
The original page body contains ten JPEGs but no MP4, YouTube embed or other model-matched video source. That gap is kept visible because a generic Royal Oak clip could not prove which configuration is being offered. Before balance payment, request one continuous exact-unit video covering dial, both case sides, matching back and markings, bracelet/clasp, winding, setting, date change and stable running.
Two separate starting points
Choose the Base Configuration Before You Customize
Configuration A
Clean 36.2 mm Black-Dial Direction
Steel-tone octagonal case and integrated bracelet, black square-pattern dial, applied markers, date 4, signed-style crown, AP-style clasp and solid engraved-style back. Choose this when compact proportions and a restrained sports-watch look matter more than display-back movement visibility or jewellery impact.
Configuration B
Full Pavé-Style 40.0 mm Direction
Clear-stone-covered dial, bezel, case, bracelet and clasp, date 14, AUTOMATIC-style plaque, exhibition back and decorated automatic-looking movement. Choose this for maximum jewellery presence, accepting a thicker 12.2 mm pictured setup and the need to specify every stone and setting detail in writing.
Six supporting views
Profiles, Clasps & Configuration-Specific Measurements
A · Crown-side profile
A clean steel-tone case and protected bracelet are visible; thickness and metal grade are not recorded.
A · Clasp exterior
The AP-style clasp and link finishing are visible under film; closure security needs a final-unit test.
A · 36.2 mm pictured width
This front placement belongs only to configuration A and should be repeated film-free on the selected watch.
B · Pavé-style bracelet and clasp
Clear stones cover moving surfaces; their identity, setting method and retention are not established by the photo.
B · Open folding clasp
The interior construction and engraved-style text are visible; final sizing and closure should be shown in video.
B · 12.2 mm pictured thickness
The reading belongs only to configuration B and remains sensitive to film and stone-covered contact points.
Ten-photo inspection
The Archive Splits Cleanly at Photo Six
Photos 1–5 document configuration A: black grid dial, steel-tone case/bracelet, solid back, N°6105-style marking and 36.2 mm pictured width. Photos 6–10 document configuration B: clear-stone pavé-style surfaces, exhibition back, decorated automatic-looking movement, N°0688/WT H0867-style markings, 12.2 mm pictured thickness and 40.0 mm pictured width. The dial, back, decoration and measurements all change, so the two groups cannot be sold as one evidence chain.
Confirmed for A
Clean black time/date dial, steel-tone integrated construction, solid engraved-style back, protected clasp/links and one 36.2 mm front-width placement.
Confirmed for B
Full clear-stone pavé-style coverage, date 14, exhibition back, automatic-looking movement, protected clasp/links and 40.0 mm/12.2 mm placements.
Missing for both
Exact reference, metal/stone certification, weight, timing, lume, water-pressure result, long-term finish/stone-retention evidence and a model-matched continuous video.
Audemars Piguet custom replica buyer guide
Royal Oak Custom Replica: Configuration, Stone & QC Guide
Treat “Custom Configuration” as a choice, not a specification
This listing does not name one standard reference, and its archive proves why that matters: five photos document a clean compact sample while five document a larger full pavé-style sample. A useful Audemars Piguet replica watch inquiry should begin with configuration A or B, then identify every visible and technical choice. Without that selection, a shared price, movement claim or size line would blur two physically different watches.
Configuration A is the restrained 36.2 mm black-dial direction
Its black square-pattern dial, baton markers, date at 3, steel-tone octagonal case and integrated bracelet keep the Royal Oak vocabulary clean and recognizable. The pictured calliper reads 36.2 mm at a front-width placement, making it the more compact of the two samples. Protective film and jaw position still matter, so repeat width, crown-direction width and thickness on the sourced unit before calling the fit final.
The solid back on configuration A leaves movement questions open
The rear photo shows a solid engraved-style back with Royal Oak-style text, a blue protective film segment and an N°6105-style marking. It does not reveal the installed movement. Do not infer quartz or automatic operation from the dial alone; ask for the exact movement name plus continuous winding, setting, date-change and seconds-hand footage.
Configuration B is a separate 40.0 mm pavé-style build
The later photos switch to a clear-stone-covered dial, bezel, case, integrated bracelet and clasp, with date 14 and an AUTOMATIC-style plaque. A separate front placement reads 40.0 mm, while the side placement reads 12.2 mm. Those numbers belong to configuration B only. Film, angle and stone-covered contact surfaces limit precision and make fresh measurements especially important.
Stone coverage is visible; stone identity is not
The dense clear-stone layout explains why searches such as audemars piguet iced out replica, iced out replica watch, diamond replica watch and moissanite replica watch may reach this page. The words describe shopper intent, not test results. Photos cannot identify diamond, moissanite, zircon or crystal, nor can they prove grade, setting method, total weight or long-term retention.
Ask for a stone map and repair policy before approving the iced option
Configuration B covers moving bracelet links and clasp-adjacent surfaces as well as the dial, bezel and case. Those areas experience flex and contact during wear. The written order should specify which surfaces are set, which remain plain, stone size and material, setting type, replacement terms, polishing limits and what happens if a stone loosens during sizing or normal use.
The exhibition back confirms visibility, not calibre
Configuration B shows a decorated automatic-looking movement with a warm-tone rotor through the back. The N°0688 and WT H0867-style marks are visible, but they do not authenticate an AP calibre, a factory, a serial or genuine origin. An automatic replica watch buyer should request movement identification, service expectations, power-reserve target and a continuous function demonstration for the exact unit.
There is no weight, timing or pressure-test evidence for either sample
The archive contains no scale, timing-machine or pressure-test image. It therefore cannot support a weight promise, accuracy number or water-resistance claim. A high quality replica watch review should add sized weight, a longer timing clip in agreed positions and any requested pressure test after customization, because stone work, bracelet sizing and case opening can change the final setup.
The page is intentionally photo-only until a matching video exists
No MP4, YouTube embed or other model-matched video appears in the original page body. Reusing another Royal Oak's footage would hide the most important distinction—the two configurations. Before balance payment, request one uncut video that begins with the selected dial, moves around both case sides, shows its matching back and markings, opens and closes the clasp, and demonstrates winding, setting, date correction and running.
Use keywords to narrow the build, not to certify it
Queries such as audemars piguet royal oak replica, audemars piguet super clone and high quality replica watch should lead to a configuration sheet and exact-unit media. They do not prove a specific factory, movement, 1:1 geometry, steel grade or stone material. The stronger page is the one that exposes what changes between versions and gives the buyer a repeatable approval checklist.
Choose a related model by the ambiguity you want to remove
Open the Royal Oak 15450SR comparison for a named, restrained 37 mm-family direction. Choose the Royal Oak 15510ST black-dial page when you want a larger clean steel-tone reference target. Use the Royal Oak 15412BC stone-set skeleton comparison when jewellery impact matters more than a conventional time/date dial.
Related Royal Oak comparisons
Three Named Models That Remove Different Custom-Page Ambiguities
Use these comparisons to decide whether your real priority is compact restraint, a clean black-dial full-size watch, or high-jewellery architecture.
Named compact-family direction
Royal Oak 15450SR.OO.1256SR.01
Its genuine-reference context is a 37 mm Royal Oak, while the completed replica page shows a restrained two-tone, silver/white-dial, exhibition-back direction. Choose it when configuration A's compact idea appeals but you want a named reference, warmer accents and visible automatic-looking movement instead of a solid back.
Clean black-dial full-size direction
Royal Oak 15510ST.OO.1320ST.07
This named 41 mm genuine-reference direction keeps a black square-grid dial and steel-tone integrated-bracelet appearance without the pavé treatment. Its completed replica page records 10.5 mm thickness and 169 g. Choose it when configuration A's colour scheme matters more than compact 36.2 mm-class presence.
Stone-set openworked direction
Royal Oak 15412BC.ZZ.1220BC.01
Its completed page documents an approximately 41.0 mm, 165.4 g sample with clear baguette-style stones and an openworked/skeleton presentation. Choose it when configuration B's jewellery impact is the priority but you prefer architectural movement visibility over a conventional pavé time/date dial.
How Time-mimic Should Handle a Royal Oak Custom Inquiry
Start by discarding the idea that the ten photos form one watch. Select A or B, define the desired changes, price every variable, then replace this mixed archive with a fresh exact-unit photo and video record before the balance is paid.
1 · Select the base
Choose clean 36.2 mm-class A or pavé-style 40.0 x 12.2 mm-class B; do not combine their photos or dimensions.
2 · Define and price every change
Record dial, metal/finish, stone material and coverage, movement, clasp, bracelet sizing, starting-price additions and warranty impact.
3 · Rebuild the evidence chain
Capture film-free dimensions, sized weight, timing, function, matching back/marks, stone inspection and one continuous video.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. For a custom build, confirm how dial, stones, finish, movement, bracelet/clasp work and any case opening affect coverage.
Flexible options
Starting Price, Deposit & Exact-Unit QC
US$776 is the preserved starting price. After configuration A or B and every modification are itemized, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after fresh exact-unit photos and a continuous video replace the mixed archive for your order.
- 1. Choose configuration A or B and record every modification
- 2. Approve the itemized quote; pay US$20 deposit to start sourcing
- 3. Review fresh exact-unit photos, measurements, tests and continuous video
- 4. Pay balance only after approval; then shipment begins
Configuration, stone and order questions
Audemars Piguet Royal Oak Custom Replica Watch FAQ
Do all ten photos show one Royal Oak Custom watch?
No. Photos 1–5 show a clean steel-tone, black square-pattern-dial sample with a solid back and 36.2 mm pictured width. Photos 6–10 show a full clear-stone pavé-style sample with an exhibition back, 40.0 mm pictured width and 12.2 mm pictured thickness. Select one configuration before price or specifications are finalized.
What does the starting price of US$776 cover?
US$776 is the existing starting price preserved from this listing, not a promise that both photographed configurations cost the same. The order summary should price the selected base watch, stone or finish work, movement, bracelet sizing, extra QC and any other modification separately before the deposit.
Are the clear stones confirmed as diamond or moissanite?
No. The photos show closely set clear stones across the dial, bezel, case, bracelet and clasp of configuration B, but they cannot establish whether the material is diamond, moissanite, zircon, crystal or something else. Request the stone identity, grade, setting method, coverage, replacement policy and care limits in writing.
Are 36.2 mm and 40.0 mm two measurements of the same case?
No. The 36.2 mm reading belongs to configuration A and the 40.0 mm reading belongs to configuration B. The watches also have different dials, decoration and casebacks. Both readings remain subject to jaw position, angle and protective film and should be repeated on the exact chosen unit.
Does either custom configuration have a verified movement?
No. Configuration A has a solid back, so its movement is not visible. Configuration B shows a decorated automatic-looking movement and warm-tone rotor, but the photograph does not authenticate calibre, factory, origin, power reserve or serviceability. Request written movement identification and a continuous function video.
What do the N°6105, N°0688 and WT H0867-style markings prove?
They are only visible markings on the photographed backs. They help distinguish the two samples but do not authenticate a serial, factory, model reference or genuine provenance. The final QC should show the markings on the physical unit being supplied.
Why is there no product video on this page?
The original archive contains ten JPEGs but no model-matched MP4, YouTube embed or other video source. A borrowed Royal Oak video would be misleading, so the page stays photo-only and asks for a continuous exact-unit dial, case, back, clasp, setting and running video before balance payment.
Which related Royal Oak should I compare first?
Choose the 15450SR for a named, restrained 37 mm-family two-tone direction; the 15510ST black-dial page for a larger clean 41 mm reference direction; or the 15412BC for a roughly 41 mm, stone-set openworked jewellery direction. Each solves a different part of this custom-page decision.
What should the custom order record contain?
Record configuration A or B, final reference direction, dial and date layout, case/bracelet material, stone identity and setting details if applicable, movement, film-free dimensions, sized weight, timing target, pressure-test request, clasp and link work, price breakdown, warranty, delivery terms and a fresh exact-unit video.