Audemars Piguet · Royal Oak · Baguette-Set Openworked
Audemars Piguet Royal Oak 15412BC Baguette-Set Openworked Replica Watch
This Audemars Piguet Royal Oak 15412BC-ZZ-1220BC-01 replica watch is documented in ten model-matched QC photos with a white-metal-tone octagonal case and integrated bracelet, a clear baguette-cut-style bezel, a dark openworked display and an exhibition back. The photographed sample shows an approximately 41.0 mm calliper reading, 165.4 g weight and a timegrapher screen displaying 0 s/day, 288° amplitude, 0.1 ms beat error and 21,600 frequency.
MODEL VIDEO
Audemars Piguet Royal Oak 15412BC Baguette-Set Openworked Replica Watch QC Video
Reference highlights
Royal Oak 15412BC Baguette-Set Look & Openworked Details
Clear baguette-cut-style bezel around the octagonal case
Straight-on photographs show clear rectangular inserts arranged around the octagonal bezel, separated by exposed fastener positions. Check each insert's orientation, height, edge spacing and reflections. The photographs support the look, but not a diamond, topaz or other gemstone identification.
Openworked front with two prominent balance-style areas
The dark chapter ring frames exposed bridges, gears, jewels and two visually prominent oscillating assemblies in contrasting gold and silver tones. Still images show the layout; they do not confirm the movement calibre or that the replica duplicates the genuine double-balance mechanism.
White-metal-tone bracelet, exhibition back and recorded QC
Brushed surfaces, polished bevels, an AP-signed crown, integrated bracelet, folding clasp and exhibition back are visible. Separate QC photographs show an approximately 41.0 mm calliper reading, 165.4 g weight and the recorded timegrapher screen.
Detailed inspection
What the 10 Royal Oak 15412BC QC Photos Show
Photos 1 and 2 show the openworked front, clear baguette-cut-style bezel, dark chapter ring, applied markers and central hands. Photo 3 documents the case profile, signed crown and integrated bracelet; photo 4 shows the exhibition back and decorated automatic movement; photo 5 records the AP-signed folding clasp. Photo 6 shows an approximately 41.0 mm calliper reading, photo 7 checks luminous response, photo 8 provides a closer rear movement view, photo 9 records 165.4 g, and photo 10 shows 0 s/day, 288° amplitude, 0.1 ms beat error and 21,600 on the timegrapher. Protective film and a THB Factory sticker are visible, but a sticker alone does not authenticate the source or materials.
Audemars Piguet replica watch buyer guide
Audemars Piguet Royal Oak 15412BC Replica: Baguette-Set Openworked Buying Guide
What exact 15412BC configuration is pictured?
The current QC set is labelled 15412BC-ZZ-1220BC-01 and shows a white-metal-tone case and integrated bracelet, transparent baguette-cut-style bezel inserts, an openworked front, AP-signed crown and clasp, and an exhibition back. Keep the full listing code and these visible attributes together in the written order.
Why the listing code needs a reference check
Audemars Piguet's current official page for a visually related gem-set 15412BC uses reference 15412BC.TO.1220BC.01, not the ZZ suffix shown in this listing. The official TO watch is described as a Double Balance Wheel Openworked model in 18-carat white gold with 32 baguette-cut Swiss topaz. That genuine-reference description must not be transferred automatically to this replica.
How to inspect the baguette-set-style bezel
Compare the insert size and orientation around all eight sides, the gaps beside the fastener positions, corner symmetry and whether any piece sits high or tilted. Ask for slow angled video under neutral light. Clear appearance alone cannot distinguish diamond, topaz, glass or synthetic material.
Does the replica prove a double-balance mechanism?
The genuine 15412BC.TO reference is named Double Balance Wheel Openworked. These photos show two prominent balance-style areas from the front and movement components through the caseback, but still images do not establish the replica's architecture, calibre or functional relationship. Request a clear running video from both sides.
White-metal-tone finishing and bracelet checks
Review brushing direction on the bezel, case and links, polished bevel continuity, crown alignment, first-link articulation and clasp closure. Protective film covers much of the bracelet, so ask for uncovered close-ups before approval and record wrist size plus the number of removable links.
How to read the photographed measurements
The calliper screen appears to show approximately 41.0 mm in the photographed position, while the scale records 165.4 g for this sample. The measurement method and protective film affect interpretation; neither reading proves white gold, stainless steel, gem material or the specification of a different sourced unit.
What the timegrapher screen establishes
The supplied screen displays 0 seconds per day, 288° amplitude, 0.1 ms beat error and 21,600. It is a useful single-position snapshot, not a long-term accuracy guarantee. Ask for a fresh fully wound, multi-position test tied to the exact unit being sourced.
Search terms that describe the look, not the material
Relevant workbook phrases include “Audemars Piguet Royal Oak replica”, “Audemars Piguet replica watch”, “Audemars Piguet iced out replica”, “iced out replica watch”, “diamond replica watch” and “skeleton replica watch”. Here, “iced out” and “diamond” describe search intent only; the photographs do not verify the insert material. Broader phrases such as “super clone watches” and “high quality replica watch” are also not specifications.
Factory sticker, movement and material claims
A THB Factory sticker is visible on the bracelet, but labels can be copied or reused. Record the current supplier's factory and batch, base metal, coating, insert material and setting method, movement designation, service notes and available parts. Do not infer any of these from the sticker or caseback decoration alone.
A practical 15412BC QC approval sequence
First match the listing code, white-metal-tone colour, openworked layout and baguette-set-style bezel. Then inspect insert seating, dial-side alignment, case and bracelet finishing, crown, clasp, caseback and measurements. Finally verify winding, hand setting, both visible balance areas in motion, fresh timing results and any requested water-resistance test before approving the balance.
Compare nearby Royal Oak configurations
Similar Audemars Piguet Royal Oak Models to Compare
These three Royal Oak pages isolate the choices that matter most next to this 15412BC: openworked versus closed dial, warm versus white-metal-tone finishing, and gem-set styling versus a simpler octagonal bezel.
Openworked without the gem-set look
Royal Oak 15407OR Openworked
Compare the 15407OR when the exposed movement is the priority but you prefer a warm rose-gold-tone case and a conventional eight-fastener bezel instead of the clear baguette-set-style surround shown here.
Steel-tone blue-dial alternative
Royal Oak 15400ST Blue Dial
Use the 15400ST page if you want the steel-tone integrated-bracelet profile with a calmer blue closed dial and date at 3 o'clock. It removes both the openworked visual density and the baguette-set-style bezel.
Rose-gold-tone closed-dial alternative
Royal Oak 15500OR
Choose the 15500OR comparison for a warmer precious-metal-style presentation with a conventional dial and date display. It is visually richer than steel tone but less jewellery-led than this 15412BC configuration.
See every Audemars Piguet replica watch, browse the full replica watch collection, or request a side-by-side QC recommendation.
How Time-mimic Handles Your
15412BC Openworked Order
We record the exact listing code, openworked layout, white-metal-tone finish and clear baguette-set-style bezel before sourcing. The order summary separately states the factory and batch, movement, base material, insert material and setting method, bracelet size, price and requested tests. You approve fresh media of the actual unit before paying the balance.
Record the code, inserts and factory separately
The written order preserves the 15412BC-ZZ-1220BC-01 listing code while separately recording the current factory and batch, case material, clear insert material and setting method. This avoids turning a search label or nearby genuine reference into an unsupported specification.
Verify the openworked movement in operation
Fresh front and rear video should show winding, hand setting and both visible balance-style areas in motion. A new timegrapher screen is tied to the actual sourced unit rather than treating the photographed 0 s/day result as a promise.
Inspect every bezel insert and bracelet surface
Request slow angled footage of the complete bezel, uncovered case and bracelet, first links and clasp. Check insert seating, symmetry, brushing, polished edges, crown alignment, bracelet fit and any requested functional test before approval.
After-sales protection
Warranty & Shipping for This 15412BC Replica
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm written coverage for the movement, bracelet, clasp, finish and bezel inserts before payment.
Flexible options
Deposit, 15412BC QC Approval & Final Payment
After the listing code, factory and batch, movement, case and bracelet material, insert material and setting method, sizing and options are confirmed, a US$20 deposit starts sourcing and QC. You pay the remaining balance only after approving photos and video of your exact unit.
How it works
- 1 Confirm model, factory & any modifications
- 2 Pay US$20 deposit to start sourcing & QC
- 3 Review QC photos & video, approve or reject
- 4 Pay balance after approval -- we ship
Product, QC and order questions
Audemars Piguet Royal Oak 15412BC Baguette-Set Openworked Replica Watch FAQ
What Royal Oak 15412BC configuration is shown?
The photos show a white-metal-tone case and integrated bracelet, transparent baguette-cut-style bezel inserts, a dark openworked front, AP-signed crown and clasp, and an exhibition back. The listing is labelled 15412BC-ZZ-1220BC-01.
Why does the listing say ZZ while the official related reference says TO?
The current Audemars Piguet page for the visually related model uses 15412BC.TO.1220BC.01 and describes Swiss topaz. This listing uses a ZZ suffix. Keep the listing code as recorded, but confirm the intended reference and replica configuration instead of assuming the two suffixes are interchangeable.
Are the clear bezel inserts diamonds or Swiss topaz?
The photos show transparent baguette-cut-style inserts, but appearance cannot verify material. The genuine TO reference's Swiss topaz description does not prove the replica uses topaz, and search phrases such as diamond replica watch do not prove diamonds. Get the insert material and setting method in writing.
What do the 41.0 mm and 165.4 g photos mean?
The calliper appears to show approximately 41.0 mm in the pictured measuring position, and the scale shows 165.4 g for this sample. They document this QC set only and do not establish case material or the dimensions of another sourced unit.
Is the replica's double-balance mechanism confirmed?
No. Two prominent balance-style areas are visible, and the genuine related reference is a Double Balance Wheel Openworked model. Still photos do not confirm the replica movement's exact architecture or calibre; request front-and-back running video and a written movement designation.
What timing result is shown for this sample?
The photographed timegrapher displays 0 seconds per day, 288° amplitude, 0.1 ms beat error and 21,600. Request a fresh fully wound, multi-position test because one screen cannot guarantee future or long-term performance.
How do deposit and QC approval work for this model?
After the exact listing code, factory, movement, materials, insert specification, sizing and written terms are confirmed, a US$20 deposit starts sourcing. Review fresh bezel, front, back, bracelet, clasp, timing and operating media; the balance is due only after approval.