Audemars Piguet · Royal Oak · Blue Dial
Audemars Piguet Royal Oak 15400ST Blue Dial Steel Bracelet Replica Watch
This Audemars Piguet Royal Oak 15400ST.OO.1220ST.03 replica watch is documented in nine model-matched QC photos with a blue tapisserie-style dial, applied luminous baton markers, a date window at 3 o’clock, an octagonal bezel and an integrated steel-tone bracelet with an AP-signed folding clasp. The pictured sample records a 46.0 mm photographed span, 12.4 mm thickness and 178 g weight.
MODEL VIDEO
Audemars Piguet Royal Oak 15400ST Blue Dial Steel Bracelet Replica Watch QC Video
Reference highlights
Royal Oak 15400ST Blue Dial & Steel Bracelet Details
Blue tapisserie-style dial with date
The straight-on photo shows a blue raised-grid dial, applied baton hour markers, three central hands and a framed date aperture at 3 o’clock. A separate low-light image shows visible blue-green emission from the hands and markers; brightness and duration still need to be checked on the exact sourced unit.
Octagonal bezel and steel-tone finishing
Eight exposed bezel fasteners, a vertically brushed bezel face, polished edge highlights and the angular crown-side profile are visible. Compare screw orientation, bezel spacing, brushing direction and the boundary between brushed and polished surfaces under several angles.
Integrated bracelet, AP clasp and display back
The integrated steel-tone bracelet continues the alternating brushed and polished look into the links and AP-signed folding clasp. Caseback photos show a transparent window, a decorated automatic movement and a gold-tone rotor. Protective film remains on much of the bracelet, so request fresh uncovered finishing photos before approval.
Detailed inspection
What the 9 Royal Oak 15400ST QC Photos Show
Photo 1 establishes the blue dial, baton markers, three-hand display and date at 3. Photo 2 shows the case profile, signed crown and bracelet articulation; photos 3 and 8 document the exhibition back, decorated movement and gold-tone rotor. Photo 4 shows the AP folding clasp. The calliper views record a 46.0 mm photographed span and 12.4 mm thickness, photo 7 provides a lume check, and photo 9 records a 178 g sample weight. Because protective film covers many links, obtain uncovered close-ups of the final bracelet and clasp before paying the balance.
Audemars Piguet replica watch buyer guide
Audemars Piguet Royal Oak 15400ST Replica: Blue Dial Buying Guide
What exact 15400ST configuration is pictured?
The current QC set shows a steel-tone 15400-style case and integrated bracelet, a blue tapisserie-style dial, luminous baton markers, three central hands, a date window at 3 o’clock, an AP-signed folding clasp and an exhibition caseback. Those visible details, together with reference 15400ST.OO.1220ST.03, should be repeated in the written order summary.
How the QC measurements relate to the 15400 family
Audemars Piguet’s historical material identifies the genuine Royal Oak 15400 as the 41 mm selfwinding model introduced in 2012. The photos of this replica instead show a 46.0 mm calliper reading across the photographed span, 12.4 mm thickness and 178 g sample weight. Treat these as sample-specific QC readings rather than genuine-reference specifications.
Blue dial, hands and date-window checks
Use the straight-on view to compare the 12 o’clock double marker, applied batons, minute track, AP signature, three hands and date frame against the dial axes. The tapisserie-style grid makes uneven placement easier to spot. Ask for a fresh date-centred photo and a short time-setting demonstration for the sourced watch.
Integrated bracelet, clasp and protective film
The bracelet uses broad steel-tone links and an AP-signed folding clasp. Several photos still show clear protective film, which is useful for transit protection but can hide fine scratches, edge finishing and colour consistency. Confirm wrist size, removable links and clasp operation, then request uncovered close-ups before final approval.
Movement view and everyday functions
The display back reveals a decorated mechanical movement with an automatic winding rotor, while the dial provides hours, minutes, central seconds and a date. Ask the QC team to demonstrate winding, time setting, date change and stable running on the exact unit. Visible decoration alone does not establish the calibre, factory or batch.
How to use the strongest search terms
The closest model phrase is “Audemars Piguet Royal Oak 15400 replica”. Broader searches such as “Audemars Piguet Royal Oak replica”, “Audemars Piguet replica watch”, “super clone watches” and “high quality replica watch” have wider shopping intent, but none confirms the dial, movement, factory or finishing. Return to the exact reference and current QC evidence.
Case, bezel and crown finishing checks
Review the bezel grain, polished perimeter, case bevels and crown-side profile under even light. The eight fasteners should be assessed for spacing and orientation, while the crown should sit square to the case. Ask for a closer uncovered photo if film, glare or perspective prevents a reliable judgment.
Lume and low-light verification
The supplied lume photo shows emission from the hands and applied baton markers. A still image cannot prove charging time, brightness or duration, so ask for a short dark-room clip of the exact watch after a stated light exposure. Keep that test separate from any water-resistance claim.
Factory, movement and batch claims
Factory names and movement labels can change between batches. Record the current factory, movement designation, service notes and available parts in writing, then compare those claims with the fresh caseback photos and operating video. Do not infer a genuine AP calibre from rotor decoration.
A practical QC approval sequence
First match the 15400ST.OO.1220ST.03 reference, blue dial and integrated bracelet. Next review measurements, dial and bezel alignment, case finishing, crown, links, clasp and caseback. Finally check winding, time setting, date change, running video, lume and any separately requested test before approving the balance.
Compare nearby references
Similar Royal Oak Models to Compare
Compare the blue-dial steel-bracelet watch on this page with a black-dial rubber-strap 15400, a fully stone-set custom 15400 and the later 15500 family. The notes below explain the practical difference each link is meant to show.
Strap and dial alternative
Royal Oak 15400ST Black Dial on Rubber
Choose this comparison to see how a black dial and black rubber strap change the character and wrist fit versus the blue dial and integrated steel bracelet documented here.
Custom finish alternative
Royal Oak 15400 Iced-Out Custom
Use this page when the priority is a fully stone-set 15400-style case and bracelet with green baguette-style markers rather than the standard steel-tone surfaces shown on this model.
Later 41 mm family
Royal Oak 15500 Replica Watch
The genuine 15500 succeeded the 15400 while retaining a 41 mm family size. Compare the later dial layout and the actual configuration shown on that product page before deciding.
See every Audemars Piguet replica watch, browse the full replica watch collection, or ask for a side-by-side recommendation.
How Time-mimic Handles Your
15400ST Blue-Dial Order
We first record the 15400ST.OO.1220ST.03 label, blue dial and integrated steel-tone bracelet. Before sourcing, the order summary lists the factory, movement, clasp, wrist size, price and any requested test. After the deposit, you receive photos and video of the actual unit before paying the balance.
Confirm the blue-dial bracelet configuration
The written record identifies the blue dial, integrated steel-tone bracelet, AP folding clasp, case finish, factory and movement so this unit is not confused with the rubber-strap or custom iced-out 15400 pages.
Review uncovered finishing before balance
Fresh dial, profile, caseback, movement, measurement, bracelet and clasp photos are compared with this page. Because the gallery shows protective film, request uncovered finishing close-ups before final approval.
Keep sizing and testing in the order record
Record wrist size, bracelet-link adjustment, any extra links and any requested water-resistance or timegrapher test separately, including availability, result and cost.
After-sales protection
Warranty & Shipping for This 15400ST Replica
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm coverage for the bracelet, clasp, movement and any optional test in the written order terms before payment.
Flexible options
Deposit, 15400ST QC Approval & Final Payment
After the blue-dial bracelet configuration, factory, movement, sizing and options are confirmed, a US$20 deposit starts sourcing and QC. You pay the remaining balance only after approving photos and video of your exact unit.
How it works
- 1 Confirm model, factory & any modifications
- 2 Pay US$20 deposit to start sourcing & QC
- 3 Review QC photos & video, approve or reject
- 4 Pay balance after approval -- we ship
Product, QC and order questions
Audemars Piguet Royal Oak 15400ST Blue Dial Steel Bracelet Replica Watch FAQ
What Royal Oak 15400ST configuration is shown?
The photos show a steel-tone 15400-style watch with a blue tapisserie-style dial, luminous baton markers, date at 3 o’clock, integrated bracelet, AP-signed folding clasp and exhibition caseback.
What measurements do the QC photos record?
The pictured sample shows a 46.0 mm calliper reading across the photographed span, 12.4 mm thickness and 178 g weight. These are QC readings for this sample, not guaranteed genuine-watch or future-batch specifications.
What should I check on the integrated bracelet?
Confirm wrist size, removable links, bracelet articulation, AP clasp operation and the transition from case to first links. Protective film covers many surfaces in the gallery, so request uncovered finishing photos for the sourced unit.
Do the blue-dial hands and markers have lume?
One QC image shows blue-green emission from the hands and baton markers. Request a fresh low-light video to judge brightness and duration on the exact watch; a still photo cannot confirm either.
What movement is visible through the caseback?
The transparent back shows a decorated mechanical movement with an automatic winding rotor. Confirm the movement designation, factory and batch in writing; the visible decoration does not prove a genuine AP calibre.
Does “super clone” guarantee a high-quality replica watch?
No. “Super clone watches” and “high quality replica watch” are shopping terms, not specifications. Verify the exact reference, factory, movement, measurements, dial, bracelet, finishing and current-unit QC together.
How do deposit and QC approval work for this model?
After the blue-dial steel-bracelet configuration and written specifications are confirmed, a US$20 deposit starts sourcing. Review the actual unit’s measurements, uncovered finishing photos and video; the balance is due only after approval.