Audemars Piguet · Royal Oak · Black Dial
Audemars Piguet Royal Oak 15400ST Black Dial Rubber Strap Replica Watch
This Audemars Piguet Royal Oak 15400ST.OO.1220ST.01 replica watch is shown in ten model-matched QC photos with a black tapisserie-style dial, luminous baton markers, a date window at 3 o’clock, an octagonal bezel and a black rubber strap with an AP-signed deployant clasp. The pictured sample records about 41.1 mm across the case, a 46.1 mm photographed overall span and 11.7 mm thickness.
MODEL VIDEO
Audemars Piguet Royal Oak 15400ST Black Dial Rubber Strap Replica Watch QC Video
Reference highlights
Royal Oak 15400ST Black Dial & Rubber Strap Details
Black tapisserie-style dial with date
The straight-on photos show a black raised-grid dial, applied baton hour markers, Royal Oak hands, central seconds and a framed date aperture at 3 o’clock. The illuminated photo confirms that the hands and hour markers emit visible green-blue light; brightness and duration should be checked again on the sourced unit.
Octagonal bezel and contrasting finishes
The eight exposed bezel fasteners, vertically brushed bezel surface, polished edge highlights and angular case profile are visible under several angles. Use the close-ups to inspect screw orientation, brushing direction, bezel-to-case alignment, crown fit and transitions between brushed and polished areas.
Rubber strap, deployant clasp and display back
Although the page uses the 15400ST.OO.1220ST.01 reference, the photographed replica is fitted with a black rubber strap rather than an integrated steel bracelet. The AP-signed deployant clasp and exhibition caseback are both documented, together with a decorated automatic movement and gold-tone rotor.
Detailed inspection
What the 10 Royal Oak 15400ST QC Photos Show
Photo 1 establishes the black-dial, three-hand and date layout. Photo 2 shows the case profile, crown and rubber-strap fit; photos 3 and 6 show the display back, decorated movement and rotor. Photos 4 and 9 document the AP-signed deployant clasp. The calliper images record about 41.1 mm across the case, 46.1 mm across the photographed overall span and 11.7 mm in thickness, while photo 8 provides a lume check. Together, the sequence lets you compare alignment, finishing, strap fit, clasp operation and movement appearance before requesting new QC for the exact unit supplied.
Audemars Piguet replica watch buyer guide
Audemars Piguet Royal Oak 15400ST Replica: Configuration & Buying Guide
What exact configuration is pictured?
The current QC set shows a steel-tone 15400-style case, black tapisserie-style dial, luminous baton markers, date at 3 o’clock, black rubber strap and AP-signed deployant clasp. Treat those visible features as the listing configuration. Do not assume an integrated steel bracelet from the reference suffix; record the rubber strap and clasp explicitly in the order summary.
How the QC measurements relate to the 15400 family
Audemars Piguet’s historical material identifies the genuine Royal Oak 15400 as the 41 mm selfwinding model introduced in 2012. The pictured replica reads about 41.1 mm at the case, 46.1 mm across the photographed overall span and 11.7 mm thick. These are QC readings from this sample, not guaranteed factory or genuine-reference specifications.
Movement and everyday functions
The dial shows hours, minutes, central seconds and a date window. The display back reveals a mechanical movement with automatic winding and a decorated rotor. Ask the QC team to demonstrate manual winding, time setting, date change and stable running on the exact watch; AP-style decoration does not by itself establish the calibre, factory or batch.
How to use model and quality search terms
“Audemars Piguet Royal Oak 15400 replica” is the most precise search phrase for this model family. Broader terms such as “Audemars Piguet replica watch”, “super clone watches”, “high quality replica watch” and “automatic replica watch” describe shopping intent, not verified specifications. Compare the actual dial, strap, dimensions, movement and fresh QC evidence instead of relying on the label alone.
What to confirm before the deposit
Write down the exact reference label, black dial, rubber strap, clasp type, case finish, factory and batch, installed movement, current price and included accessories. Also confirm wrist sizing, warranty, shipping destination and whether a water-resistance test is required. Approve the balance only after order-specific photos and video match that record.
Dial, hands and bezel alignment checks
Use a straight-on photo to compare the 12 o’clock double marker, applied batons, minute track, hands, AP signature and date frame against the vertical and horizontal axes of the dial. Then inspect the eight bezel fasteners and the gap around the octagonal bezel. Angled photos help separate a real alignment issue from perspective distortion.
Case finishing and crown checks
The Royal Oak look depends on crisp transitions between brushed surfaces and polished bevels. Review the bezel grain, case edges, lugs and crown-side profile under even light. Ask for close-ups if any edge looks rounded, if the brushing changes direction unexpectedly or if the crown does not appear to sit square against the case.
Rubber-strap fit and wrist sizing
A rubber strap changes both the look and the fit compared with a steel bracelet. Confirm the usable hole range, keeper position, deployant-clasp orientation and whether the strap sits flush at both case attachments. Give your wrist circumference before sourcing so the seller can verify that the pictured-style strap closes comfortably.
Factory, movement and batch claims
Factory names and movement labels can change between batches, so they should be treated as order-level specifications. Request the current factory, movement designation and any service notes in writing, then use the caseback photos and a short operating video to check that the delivered unit matches those claims.
A practical QC approval sequence
First match the reference label, black dial and rubber strap. Next check measurements, dial and bezel alignment, case finishing, crown, clasp and caseback. Finally review winding, time setting, date change, running video and any requested water-resistance test. Approve only when the full record describes one consistent watch.
Compare nearby references
Similar Royal Oak Models to Compare
Use these pages to compare a different 15400 treatment or move to the later 15500 family. Each recommendation has its own photos and product record; confirm the exact dial, strap or bracelet, dimensions, movement and current batch before choosing.
Same reference family
Royal Oak 15400ST.OO.1220ST.03
Start here when you want another listed 15400ST configuration and need a direct comparison of the dial, attachment, case finishing and QC evidence.
Custom alternative
Royal Oak 15400 Iced-Out Custom
Compare this if you prefer a fully stone-set 15400-style watch with green baguette-style markers instead of the restrained black-dial and rubber-strap look shown here.
Later 41 mm family
Royal Oak 15500 Replica Watch
The genuine 15500 succeeded the 15400 at 41 mm. Use this listing to compare the later family’s visible dial proportions and available replica configurations.
See every Audemars Piguet replica watch, browse the full replica watch collection, or ask for a side-by-side recommendation.
How Time-mimic Handles Your
15400ST Rubber-Strap Order
We first record that you want the black-dial 15400ST-style watch on a black rubber strap. The pre-deposit summary identifies the strap and clasp, factory, movement, case finish, price and any requested options. After sourcing, you receive photos and video of the actual unit before paying the balance.
Confirm the rubber-strap configuration
The written order record states the black dial, rubber strap, AP-style deployant clasp, case finish, factory and movement so it is not confused with a steel-bracelet 15400 listing.
Review the exact watch before balance
Fresh dial, profile, caseback, movement, strap, clasp, measurement and lume photos are compared with this page. Shipping starts only after your approval and final payment.
Keep bracelet swaps and testing separate
A steel-bracelet swap, extra strap, refinishing or water-resistance testing is quoted and documented separately, including availability, cost and any fit trade-offs.
After-sales protection
Warranty & Shipping for This 15400ST Replica
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Confirm coverage for the rubber strap, deployant clasp, movement and any optional bracelet in the written order terms before payment.
Flexible options
Deposit, 15400ST QC Approval & Final Payment
After the black-dial rubber-strap configuration, factory, movement and options are confirmed, a US$20 deposit starts sourcing and QC. You pay the remaining balance only after approving the photos and video of your exact unit.
How it works
- 1 Confirm model, factory & any modifications
- 2 Pay US$20 deposit to start sourcing & QC
- 3 Review QC photos & video, approve or reject
- 4 Pay balance after approval -- we ship
Product, QC and order questions
Audemars Piguet Royal Oak 15400ST Black Dial Rubber Strap Replica Watch FAQ
What Royal Oak 15400ST configuration is shown?
The photos show a steel-tone 15400-style case with a black tapisserie-style dial, luminous baton markers, date at 3 o’clock, black rubber strap, AP-signed deployant clasp and exhibition caseback.
Does this 15400ST replica come on a steel bracelet?
The current gallery shows a black rubber strap, not an integrated steel bracelet. If you want a bracelet, ask whether a compatible option is available and have the supplied attachment and clasp written into the order summary.
What dimensions do the QC photos record?
The pictured sample reads about 41.1 mm across the case, 46.1 mm across the photographed overall span and 11.7 mm thick. Request the same three measurements for the exact watch sourced for your order.
What movement is visible through the caseback?
The display back shows a decorated mechanical movement with an automatic winding rotor. Confirm the installed calibre, factory and current batch in writing; the appearance alone does not prove a genuine AP calibre.
Do the hands and hour markers have lume?
One QC photo shows visible green-blue emission from the hands and baton markers. Because a still image cannot establish brightness or duration, request a fresh low-light test for the exact unit.
Does “super clone” guarantee high quality?
No. “Audemars Piguet super clone” and “high quality replica watch” are shopping labels rather than specifications. Verify the factory, movement, dimensions, finishing, strap, clasp, warranty and current-unit QC together.
How do deposit and QC approval work for this model?
After the black-dial rubber-strap configuration and written specifications are confirmed, a US$20 deposit starts sourcing. Review the actual watch’s photos, measurements and video; the balance is due only after approval.