Green 3716 chronograph · ten-photo QC
IWC Schaffhausen Portugieser IW371615 Replica Watch
Ten photographs show a green vertical two-register chronograph-style dial, bright steel-colour case, crown and two pushers, black glossy crocodile-pattern fitted strap, deployant clasp and transparent-back automatic mechanical appearance. The set also shows a separate loose strap pair, about 43.9 mm across the crown-side envelope and about 13.6 mm thickness.
The 97 g screen includes the watch and loose spare strap sections
It is a combined pictured load, not a watch-only weight. The extra strap is visible but not automatically promised, fitted, measured or material-verified. Final QC should weigh the watch alone and record separately whether the accessory is included.
Retained product media
Existing IW371615 Video
The original MP4 remains on the page and its server returned HTTP 206 for a Range request. It was not watched, so no dial, accessory, movement, chronograph, material or performance statement in this copy comes from it.
Request a new film-free exact-unit record that keeps the 6205001-style number visible and weighs the watch separately from every loose strap.
Three readings with three different meanings
Overall Width, Thickness and a Mixed Scale Load
About 43.9 mm
Appears to include the crown-side envelope; not equivalent to a 41 mm crown-excluded case diameter.
About 13.6 mm
Around 0.6 mm above IWC's 13.0 mm genuine specification, pending a centred calibrated repeat.
97 g is not watch-only
The watch and detached strap sections are all on the platform; separate them for a usable net-weight record.
Six supporting QC views
The Loose Strap Record and the Combined Weight
Watch beside a bagged loose strap pair
The photograph documents a separate accessory, but not its inclusion, compatibility, material or condition.
Loose strap front surfaces
Glossy crocodile-pattern sections are visible; no installed fit or measured dimensions are shown.
Loose strap undersides and marks
IWC-style and other markings are appearance evidence, not proof of official manufacture or material.
Loose strap edge comparison
The viewed padding differs in profile, but there is no ruler, compression control or full-length installed test.
Fitted strap hole and stitch view
The current black patterned strap is visible in use; smallest and largest closed wrist sizes remain unmeasured.
A 97 g combined pictured load
The watch and separate spare strap sections share the scale, so 97 g is not a watch-only weight.
Accessory and weight disclosure
A Pictured Spare Strap Is Not an Included, Compatible Accessory Until Written Down
Visible
A separate black glossy crocodile-pattern strap pair appears in a bag and in three loose close views.
Not established
Inclusion, material, widths, lengths, condition, clasp compatibility, spring bars and actual installed fit are unproven.
Required record
List the accessory and its dimensions in writing, then weigh the watch and loose strap separately on a zeroed scale.
Ten-photo boundary
What Is Visible and What Still Needs Exact-Unit Proof
Confirmed in the photos
Green vertical-register face, steel-colour exterior, crown and two pushers, fitted and loose black patterned straps, deployant clasp, transparent back, C.69355/27 JEWELS/6205001-style text, about 43.9 mm, 13.6 mm and a 97 g combined load.
Not independently confirmed
Stainless steel, alligator, rhodium plating, sapphire, actual 69355, 205 components, 27 functional jewels, Swiss manufacture, full chronograph operation, timing, 46-hour reserve, 3 bar, watch-only mass, spare-strap inclusion or compatibility, serial validity or authenticity.
Best next request
One film-free continuous record with back number, neutral-light face, separate case and crown-side measurements, centred thickness, watch-only and accessory weights, written spare-strap details, actual movement, complete chronograph cycles, multi-position timing, timed reserve and agreed material/pressure evidence.
IWC Portugieser replica buyer guide
IW371615 Guide: Green Dial, Spare Strap, Measurements & QC
Green is the unmistakable model cue
The straight-on photograph shows a saturated green dial field with bright applied-looking Arabic numerals, dot markers and leaf-style hands. IWC also identifies green as the genuine IW371615 colour. This is a strong visual direction match, but colour agreement alone does not establish dial construction, material, reference identity or authenticity.
Radial light play should be recorded under neutral conditions
The dial changes from dark emerald to brighter green as light crosses it, producing a pronounced radial or sunburst-like impression. Final QC should include diffuse neutral light, a straight-on view and slow angle changes so the buyer can separate actual surface treatment from reflection, exposure and camera processing.
The vertical two-register layout remains clear
A counter sits at 12 and a small-seconds-style display sits at 6, leaving the broad green field relatively open. Large Arabic numerals and the fine peripheral scale preserve the Portugieser chronograph look. Still photographs confirm arrangement, not the mechanical role or engagement of each hand.
A complete chronograph cycle is still missing
The genuine reference records minutes and seconds, but this replica's still set cannot demonstrate start, upper-register accumulation, stop or reset. Request several uninterrupted cycles, watch for hand jump or stutter, and confirm that the central hand and counter return cleanly to zero.
Small seconds and hacking require a setting demonstration
IWC lists small hacking seconds for the genuine watch. The lower register's appearance does not prove continuous running or whether it stops when the crown is pulled on this sample. Ask for winding, setting and crown-position footage with the 6205001-style back number tied to the same unit.
Blue films obscure crown and pusher finishing
Protective film remains on all three control ends. It can hide scratches, logos, uneven polishing or colour mismatch. The final record should remove the film, show each control head-on and from the side, then demonstrate winding, setting and repeated chronograph operation.
Steel colour is not a material test
The case, bezel, controls, back ring and clasp look bright steel-colour with polished and brushed-looking areas. IWC specifies stainless steel for the genuine reference. The photos cannot identify the sample alloy or surface treatment, so the seller should state those points in writing.
The fitted black strap broadly matches the genuine colour direction
IWC specifies a black alligator leather strap for the genuine IW371615. The sample is fitted with a black glossy crocodile-pattern strap and deployant clasp. This supports a colour and texture comparison only; it does not prove species, tannery, official manufacture, origin or long-term durability.
A separate loose strap pair appears in four photographs
The first images show another black glossy crocodile-pattern strap set in a clear bag, from the front, underside and edge. These views are useful for identifying the pictured accessory, but they do not show a completed installation or a written promise that the pair belongs to every order.
Do not treat the loose strap as included by default
Before payment, record whether the extra pair is included, its material, lug width, buckle-end width, two lengths, spring-bar type, taper, clasp compatibility and condition. If it is an optional purchase or demonstration item, the final order summary should say so clearly.
The edge view does not prove equal construction
One photo places two loose strap sections edge-on. Their thickness and padding appear different at the viewed points, but there is no ruler, compression control or full-length comparison. Ask for measured thickness at the lug, centre and tip if strap feel matters.
The transparent back follows the genuine 3716 direction
IWC lists a sapphire display back for genuine IW371615, and the replica also exposes a decorated automatic mechanical appearance. That is a meaningful platform-level visual match. It does not prove sapphire, sealing, exact case architecture or the movement installed underneath the decoration.
C.69355-style text is not a movement identity card
The photographed bridge area carries C.69355-style wording, while IWC names calibre 69355 for the genuine reference. A reproduced label can sit on a different mechanism. Ask for the actual replica movement designation, balance frequency, functional layout, parts availability and repair route.
Twenty-seven-jewel wording remains appearance evidence
TWENTY-SEVEN (27) JEWELS-style text is also visible and matches the official jewel count numerically. The photographs cannot count functional jewels or establish their locations, quality or origin. Use the wording to match the delivered unit, not to certify genuine movement construction.
Decoration and rotor shape should be judged visually
The display back shows a rotor-style component, striped surfaces, red jewel-like points and engraved-looking bridges. These can be reviewed for cleanliness, scratches and symmetry. They do not prove IWC finishing, 205 components, Swiss manufacture, column-wheel design or service compatibility.
The 6205001-style number is a continuity marker
The back ring carries a 6205001-style string beside PORTUGIESER, CHRONOGRAPH and 3 BAR-style text. Keep that string visible through final front, back, sizing and test records so the evidence remains attached to one unit. It is not official serial registration or provenance.
About 43.9 mm is a crown-side envelope
The caliper display reads about 43.9 mm with the right-side controls included in the measured span. It helps estimate the widest wearing envelope, but it is not equivalent to a crown-excluded case diameter. Do not present it as IWC's official size or a direct 2.9 mm discrepancy.
Request a separate 41 mm method comparison
IWC lists 41 mm for the genuine case. A like-for-like check needs the caliper jaws across the round case body away from crown and pushers, with zero and maximum-diameter placement visible. Preserve the 43.9 mm crown-side reading as a separate overall-width field.
About 13.6 mm is above the official 13.0 mm height
The side reading is roughly 0.6 mm higher than IWC's genuine-watch specification. The image does not show calibration or confirm that the jaws touch the highest crystal and caseback points squarely. A centred repeat at least twice is more useful than explaining away the gap.
The 97 g photograph is a combined accessory load
The scale platform holds the watch with its fitted strap and the detached spare strap sections at the same time. Calling 97 g the watch weight would be inaccurate. At most, it is the combined pictured load under an unshown zero and calibration state.
A watch-only weight needs a clean setup
Remove every loose accessory, confirm which films remain, show the empty scale at zero and then place only the exact watch and fitted strap on the platform. If the extra strap is part of the order, weigh it separately. This creates useful fit and shipping references without mixing components.
No sample timing result is shown
There is no timegrapher screen in the ten photographs. Do not borrow the -3 s/day result from the related blue IW371601 page or turn the official 28,800 VPH specification into a sample measurement. Ask for several positions after a consistent full wind and settling interval.
The genuine 46-hour reserve needs a replica log
IWC lists 46 hours for the genuine calibre 69355. The sample provides no winding protocol or start-to-stop record. Request the actual movement name, a defined full-wind procedure, start time, periodic checkpoints and stop time on the same 6205001-style numbered unit.
Three-bar engraving is not a pressure test
The back ring says 3 BAR and the genuine reference has an official 3 bar rating. Neither statement tests the replica's gaskets, crown, pushers, crystal or assembly. If water resistance matters, agree on a measured exact-unit test and keep the result with the order record.
Sapphire and anti-reflection claims remain unverified
IWC specifies a convex sapphire crystal with anti-reflective treatment on both sides and a synthetic sapphire back window. The sample photos identify neither material. Ask for written sample specifications, neutral-light defect macros and clear warranty coverage.
Buyer keywords do not establish quality
The market sheet supports replica iwc watch, IWC Portugieser replica, chronograph replica watch, automatic replica watch, replica watches, luxury replica watch and high quality replica watch as relevant search language. Some buyers also compare super clone watches. Each phrase still requires exact-unit evidence.
The retained MP4 was not watched
The original video remains embedded and accepted an HTTP Range request, but it was not used as evidence. All sample statements come from the ten photographs. A fresh continuous record should connect the green face, 6205001-style back number, controls, dimensions, watch-only weight and functions.
IW371601 keeps the 3716 platform and changes the colour
The Portugieser IW371601 page provides a blue, anniversary-style 3716 comparison with the same general display-back design direction. Compare dial colour, official component-count context and each sample's independent measurements.
IW371446 is the older silver-blue route
The Portugieser IW371446 page uses a silver-white face with blue details and strap. Its older genuine reference has a standard solid back and 79350 context, making the generation difference visible.
IW358306 removes the chronograph layer
The Portugieser IW358306 page keeps a large Arabic-numeral dress face but removes the pushers and upper register. It is the calmer comparison when small seconds and simpler operation matter more than timing events.
Genuine-reference context was checked against IWC's official IW371615 product page and the official Portugieser reference 3716 press release. Genuine specifications and replica photo evidence remain separate.
Exact genuine-reference context
Official IW371615 vs. This Replica Photo Record
IWC's genuine IW371615
IWC lists a green dial, rhodium-plated hands and appliques, stainless-steel case, black alligator strap, sapphire display back, 41 mm diameter, 13 mm height, 20/18 mm strap/buckle widths, 3 bar, automatic calibre 69355, 46-hour reserve, 28,800 VPH, 205 components, 27 jewels, minute-and-second chronograph, small hacking seconds and convex double-sided anti-reflective sapphire.
This IW371615 replica photo set
The sample broadly follows the green, steel-colour, black-strap and display-back direction. It shows a 43.9 mm crown-side envelope, 13.6 mm thickness and a mixed 97 g scale load, but does not prove official materials, plating, calibre, components, jewels, functions, timing, reserve, crystal, pressure, accessory inclusion, provenance or authenticity.
Blue 3716, older silver-blue, or simpler small seconds
Three Related IWC Models with Clear Reasons to Compare
Stay with the later transparent-back chronograph platform, move to an older colour architecture, or remove the chronograph layer.
Same 3716 family, blue direction
Portugieser IW371601
Its blue anniversary-style face and display back make it the closest platform comparison. Its official 194-component context and sample measurements remain separate from IW371615.
Older silver-and-blue route
Portugieser IW371446
This reviewed sample uses a silver-white face, blue details and dark-blue strap, while its genuine reference belongs to an older solid-back 79350 generation.
Simpler small-seconds route
Portugieser IW358306
The Automatic 40 direction removes both pushers and the upper register, favouring a calmer warm-tone dress-watch face and a different fit target.
How Time-mimic Should Handle an IW371615 Inquiry
The order record should preserve the green, steel-colour, black-strap and display-back configuration while removing ambiguity around the extra strap and mixed scale photo.
1 · Lock watch and accessory separately
Record the fitted strap and state whether the loose pair is included, sized and compatible.
2 · Repeat all physical readings
Separate case diameter from overall width, centre the thickness and weigh the watch alone on a zeroed scale.
3 · Add missing functional proof
Name the movement; show chronograph cycles, multi-position timing, timed reserve and any agreed pressure result.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Record coverage for movement, chronograph, timing, reserve, crystal, fitted strap, any included spare strap, clasp, crown, pushers and agreed pressure result.
Flexible options
Deposit, QC & Final Payment
After IW371615, its photographed green configuration and every included strap are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after the exact-unit record matches the agreed terms.
- 1. Confirm the watch configuration, fitted strap, loose-strap inclusion and back number
- 2. Pay US$20 deposit to start sourcing and exact-unit QC
- 3. Review film-free macros, separate dimensions, watch-only weight, accessory details, actual movement, full chronograph cycles, timing, reserve, crystal and pressure evidence
- 4. Pay balance only after approval; then shipment begins
Product, accessory, evidence and order questions
IWC Schaffhausen Portugieser IW371615 Replica Watch FAQ
What do the ten IW371615 photos confirm?
They show a green vertical two-register chronograph-style dial, steel-colour case, crown and two pushers with blue protective films, black glossy crocodile-pattern fitted strap, deployant clasp, transparent-back automatic mechanical appearance, a separate loose strap pair, a 6205001-style number, about 43.9 mm across the crown-side envelope, about 13.6 mm thickness and a 97 g combined scale load.
Is 97 g the watch-only weight?
No. The scale photo includes the watch with its fitted strap plus the separate loose strap sections on the platform. It records a combined pictured load, not the watch's net weight. Request a zeroed watch-only measurement and, if included, a separate accessory weight.
Is the extra black strap guaranteed to be included?
No. The photos show a loose strap pair in and out of a clear bag, but images alone do not establish inclusion, fit, width, length, material, condition or compatibility. Record every included accessory in the order summary before paying.
Does the 43.9 mm photo conflict with IWC's official 41 mm diameter?
Not directly. The sample image appears to span the crown-side overall envelope, while IWC's 41 mm figure is a case diameter. Ask for separate crown-excluded case and crown-side overall-width measurements with zero and jaw placement visible.
How should the 13.6 mm sample thickness be compared?
It is about 0.6 mm above IWC's official 13.0 mm genuine-watch height. The photo does not establish calibration or centred contact across the highest crystal and back points, so retain the difference and request a repeated exact-unit reading.
Do C.69355 and 27 JEWELS-style markings prove the movement?
No. Those labels correspond numerically to genuine IW371615 specifications, but reproduced engraving, decoration and rotor shape cannot identify the mechanism underneath. Confirm the actual replica movement and service route in writing.
Are the chronograph functions and 46-hour reserve proven?
No. The still set does not show an uninterrupted start-stop-minute-accumulation-stop-reset sequence or a timed reserve log. Request several complete cycles and a recorded full-wind start-to-stop test on the same numbered unit.
Are timing, sapphire and 3 bar verified for the sample?
No. There is no timegrapher screen, crystal-material test or pressure result. IWC's genuine specifications and the sample's 3 BAR-style back text cannot be transferred to the replica as tested facts.
Does the green dial prove an exact genuine-reference match?
No. The colour and vertical-register layout broadly follow genuine IW371615, but photographs do not prove dial construction, rhodium plating, steel, alligator, movement, crystal, production source, serial validity or authenticity.
How do I order this green IWC Portugieser replica?
Record IW371615, the green two-register face, steel-colour exterior, black fitted strap, display back and 6205001-style number. State separately whether the loose strap is included. Then request film-free macros, separate dimensions, watch-only weight, actual movement, full chronograph operation, multi-position timing, timed reserve, crystal statement and any agreed pressure proof. The listed price is US$627 and a US$20 deposit starts sourcing and QC.