Silver-white and blue 3714 direction · ten-photo QC
IWC Schaffhausen Portugieser IW371446 Replica Watch
Ten photographs show a silver-white vertical two-register chronograph-style dial with blue Arabic numerals and leaf-style hands, a steel-colour case, crown and two pushers, dark-blue glossy crocodile-pattern strap, deployant clasp and a transparent back with a decorated automatic mechanical appearance. The set also includes about 13.8 mm thickness and about 40.9 mm across the main case body.
The display back and C.69355/27 JEWELS-style text conflict with IW371446
IWC specifies a standard solid back, calibre 79350 and 31 jewels for the genuine IW371446. The replica sample instead shows an exhibition back carrying later-calibre-style wording. The markings and rotor design do not identify the movement actually installed.
Retained product media
Existing IW371446 Video
The original MP4 remains on the page and its server returned HTTP 206 for a Range request. It was not watched, so no dial, movement, chronograph, material or performance statement in this copy comes from it.
Request a fresh exact-unit record that removes the blue films and connects the 6237953-style back number to dimensions, control operation and every agreed test.
Two dimensions with different conclusions
A Matching 40.9 mm Width, but a Taller 13.8 mm Sample
About 40.9 mm
The jaws appear to span the main case body and exclude controls; one matching number is not identity proof.
About 13.8 mm
Around 1.3 mm above IWC's current 12.5 mm figure, pending a centred calibrated repeat.
No weight or timing photo
The page leaves sample weight, daily rate, amplitude, beat error and measured frequency unclaimed.
Six supporting QC views
Back Conflict, Full-Length Views, Tag & Measurements
Display back with cross-generation markings
C.69355 and 27 JEWELS-style text conflicts with the genuine IW371446's official 79350, 31-jewel, solid-back specification.
Full-length view with open clasp
The dark-blue strap, keepers, hole pattern and deployant placement are visible; no wrist range is measured.
Separate view with changed hand positions
The change is not a continuous start-stop-reset test and cannot prove chronograph operation.
Removable ZF-style hang tag
A movable tag does not prove factory, batch, movement, grade, source or included accessories.
About 13.8 mm pictured thickness
Roughly 1.3 mm above IWC's current 12.5 mm figure, pending a centred, zero-verified repeat.
About 40.9 mm case-body span
The jaws appear to exclude crown and pushers; one matching reading is not proof of construction or identity.
Ten-photo boundary
What Is Visible and What Still Needs Exact-Unit Proof
Confirmed in the photos
Silver-white dial, blue numerals and hands, vertical two-register layout, steel-colour exterior, crown and pushers, dark-blue crocodile-pattern strap, deployant clasp, display-back automatic appearance, C.69355/27 JEWELS/6237953-style marks, about 40.9 mm and 13.8 mm.
Not independently confirmed
Stainless steel, alligator or origin, actual 69355 or 79350, component or jewel count, Swiss manufacture, chronograph operation, weight, timing, 44-hour reserve, sapphire, anti-reflection, 3 bar, serial validity, ZF factory, grade or authenticity.
Best next request
One film-free continuous record with back number, repeated dimensions, zeroed weight, actual materials and movement, winding/setting, complete start-stop-reset cycle, several-position timing, timed reserve, crystal statement and any agreed pressure result.
The back tells a different-generation story
Official Solid Back and 79350 vs. Sample Display Back and 69355-Style Text
Official standard back
IWC's genuine IW371446 specification calls for a standard solid caseback, not a transparent movement view.
Official 79350 and 31 jewels
Those are genuine-reference specifications and cannot be transferred to the photographed replica.
Sample C.69355 and 27 JEWELS text
The visible labels suggest later design language but do not establish the actual movement, jewels or origin.
IWC Portugieser replica buyer guide
IW371446 Guide: Silver-Blue Dial, Cross-Generation Back, Dimensions & QC
The dial is silver-white, not blue
The dial surface reads as silver-white in both close and full-length photographs. Blue is concentrated in the applied-looking Arabic numerals, dot minute markers, leaf-style hour and minute hands, thin central hand, register hands and strap. Keeping that distinction clear helps a buyer compare the actual configuration instead of shopping from an inaccurate colour label.
Vertical registers define the 3714-style face
A register sits at 12 and another at 6, framed by a fine peripheral scale and large Arabic numerals. The genuine IW371446 uses the upper counter for stopped minutes and the lower display for running small seconds. The replica follows the visual arrangement, but still photographs do not establish the actual gear train or function of each hand.
Blue hands need neutral-light macro QC
The central and subdial hands reflect differently as the watch angle changes. Final photographs should use neutral light and a straight-on angle to show colour consistency, polished edges, hand stacking and clearance above the dial. Glare can hide scratches or make one blue treatment look darker than another.
Two pushers do not prove a working chronograph
The control side shows a crown between upper and lower pushers. That supports a chronograph-style case, but no still image can demonstrate start, stop, minute accumulation or reset. Ask for several uninterrupted cycles and inspect whether the thin central hand and upper counter return precisely to zero.
Blue films hide the control-end finish
The crown and pusher ends remain covered by blue protective film. Film can obscure scratches, logos, edge finishing and colour mismatch. The final exact-unit record should remove it, show each control under neutral light and then demonstrate winding, setting, any hacking behaviour and chronograph operation.
Steel colour is not a material certificate
The case, controls, back ring and clasp have a bright steel-colour appearance with polished and brushed-looking areas. IWC specifies stainless steel for the genuine reference. The photograph alone cannot identify the sample alloy, so the actual case and clasp materials and any coating should be confirmed in writing.
The dark-blue strap broadly matches the genuine colour direction
IWC lists a blue alligator strap for the genuine IW371446, and the sample shows a dark-blue glossy crocodile-pattern strap. Colour and texture are visually aligned at a broad level. They do not prove species, tannery, supplier, country of origin or official IWC manufacture.
The display back is the most important construction mismatch
IWC's official historical page lists a standard solid back for IW371446. The photographed replica instead exposes a decorated automatic mechanical appearance. That is not a minor accessory change: it alters the rear architecture and introduces movement-style details that are absent from the official external design.
C.69355-style text points to a different design language
The display-back movement area carries C.69355-style wording and a TWENTY SEVEN (27) JEWELS-style line. The official IW371446 specification names calibre 79350 with 31 jewels. The sample markings resemble a later 69355 visual direction, but they still cannot identify what movement is actually installed.
Rotor and bridge engravings cannot establish origin
A full-size rotor-style component, bridge decoration, red jewel-like points and MADE IN SWITZERLAND-style text are visible. These are useful matching details for delivery. They do not prove Swiss manufacture, functional jewel count, component count, calibre, factory, assembly quality or service compatibility.
The 6237953-style number is a continuity marker only
The back ring carries a 6237953-style string alongside PORTUGIESER, CHRONOGRAPH and 3 BAR-style text. Record it so the later QC unit can be compared with the same pictured case. It is not proof of official serial registration, authenticity, pressure resistance or production history.
About 40.9 mm appears to be the main case-body span
The final caliper image places the jaws across the round case while the crown and pushers remain outside the measured endpoints. The display reads about 40.9 mm. This is stronger than a crown-inclusive envelope image, yet it is still a single reading without shown calibration, repeated placement or tolerances.
A matching official diameter is not identity proof
IWC also lists 40.9 mm for the genuine reference. Matching numbers can be useful for proportion comparison, but they do not prove the same construction, machining, reference or authenticity. Ask for a second measurement from a different angle with the zero state shown before the watch enters the jaws.
The pictured 13.8 mm is above the official 12.5 mm
One side caliper view reads about 13.8 mm, roughly 1.3 mm above IWC's current historical-page height. The image does not show calibration or perfect centring across the highest crystal and back points. Keep the gap visible and repeat the measurement rather than explaining it away.
Old and current official height figures should not be mixed
An older official reference guide lists 12.3 mm, while IWC's current historical page lists 12.5 mm. This page uses 12.5 mm as its principal official comparison and notes the version difference in the research record. Neither genuine-watch number is assigned to the replica.
Full-length photographs show fit components, not wrist range
The later images lay the watch flat with the strap and deployant clasp open. They show overall strap shape, hole pattern, keepers and clasp placement, but no wrist circumference is measured. Ask for the smallest and largest comfortable closed sizes and the exact strap taper.
Changed hand positions are not a continuous function test
The two flat views show some hand positions at different moments. That is consistent with time passing or control operation, but the photographs are separate and do not reveal what happened between exposures. Only an uninterrupted close record can verify running seconds, stopped minutes and reset behaviour.
The ZF-style tag is movable and non-probative
One photograph places a black ZF-style hang tag beside the watch. Because it is a separate movable object, it cannot establish factory, production batch, movement, grade, inspection standard or source. It should also not be promised as included unless the seller confirms the exact delivered accessories.
There is no sample weight or timegrapher screen
This ten-photo set contains no scale and no timing instrument. The page therefore gives no replica weight, daily rate, amplitude, beat error or measured frequency. Those fields should remain blank until exact-unit evidence exists, even though the official genuine specification lists 28,800 VPH.
Official 44-hour reserve needs its own timed log
IWC lists 44 hours for the genuine calibre 79350. The replica photos do not show a winding protocol or start-to-stop sequence. Ask for the actual movement name, a consistent full-wind procedure, start time, periodic checkpoints and stop time on the same 6237953-style numbered unit.
3 BAR engraving is not a pressure result
The back ring carries 3 BAR-style text and the genuine watch is officially rated 3 bar. Neither fact tests the replica's seals, crystal seating, pushers or assembly. If water resistance matters, agree on a measured method and retain the result with the exact unit; otherwise treat the watch cautiously around water.
Sapphire and anti-reflection claims need sample evidence
IWC specifies convex sapphire with anti-reflective treatment on both sides for the genuine model. The sample photos show reflections but no material test or coating inspection. Request the seller's written crystal specification, neutral-light macros and clear defect coverage rather than transferring the genuine claim.
Search phrases should not become product guarantees
The attached workbook supports replica iwc watch, IWC Portugieser replica, chronograph replica watch, automatic replica watch, replica watches, luxury replica watch and high quality replica watch as buyer language. Some users also search for super clone watches. None of those terms proves factory, grade, material, movement, waterproofing or authenticity.
The retained MP4 was not used as evidence
The original video remains embedded and its server accepted an HTTP Range request. It was not watched. All sample descriptions here come from the ten reviewed photographs, with genuine-reference facts kept in a separate official block. A fresh exact-unit record should connect front, back, dimensions and functions continuously.
IW371445 is the closest same-generation colour comparison
The Portugieser IW371445 page keeps the silver-white two-register architecture but its photographed sample uses warm-tone dial details and a brown strap. Compare colour and configuration while keeping each page's back, measurements and QC evidence separate.
IW371601 is the useful later-generation comparison
The Portugieser IW371601 page represents a later 3716 chronograph direction. It is especially relevant because this IW371446 sample carries C.69355 and 27 JEWELS-style back text, but no visual resemblance proves actual movement identity.
IW358306 removes the chronograph layer
The Portugieser IW358306 page keeps a silver-white Arabic-numeral dress face but replaces the vertical chronograph structure with small seconds and a single crown. Choose it for simplicity, then assess its distinct warm-tone sample evidence.
Exact genuine-reference context was checked against IWC's official IW371446 history page and official Portugieser reference guide. Genuine specifications and replica photo evidence remain separate.
Exact genuine-reference context
Official IW371446 vs. This Replica Photo Record
IWC's genuine IW371446
IWC lists a silver dial, stainless-steel case, blue alligator strap, standard solid back, 40.9 mm diameter, 12.5 mm height, 20 mm strap, 18 mm buckle, 3 bar, automatic calibre 79350, 44-hour reserve, 28,800 VPH, 272 components, 31 jewels, minute-and-second chronograph, small hacking seconds and convex double-sided anti-reflective sapphire.
This IW371446 replica photo set
The sample broadly matches the silver-and-blue front colour direction and shows about 40.9 mm across the case body, but its pictured 13.8 mm is taller and its transparent back carries C.69355 and 27 JEWELS-style text. The photos do not prove official materials, calibre, components, jewels, functions, reserve, crystal, pressure, origin or authenticity.
Same generation, later generation, or simpler dial
Three Related IWC Models with Clear Reasons to Compare
Compare a warmer same-generation sample, inspect a later 3716 chronograph direction, or remove the chronograph layer for a calmer Automatic 40 design.
Same-generation warmer route
Portugieser IW371445
This reviewed same-generation page uses warm-tone dial details and a brown sample strap. It carries its own solid-back versus display-back disclosure and independent measurements.
Later-generation chronograph route
Portugieser IW371601
The later 3716 direction is the relevant comparison for transparent-back and 69355-style design language. Its evidence still cannot identify this sample's movement.
Simpler small-seconds route
Portugieser IW358306
This reviewed Automatic 40 sample removes the pushers and upper register, favouring a calmer dress layout with separate warm-tone case evidence.
How Time-mimic Should Handle an IW371446 Inquiry
The order record should preserve the silver-white and blue photographed configuration while explicitly separating the genuine solid-back 79350 specification from the sample's transparent back and later-calibre-style text.
1 · Lock the visible configuration
Record silver-white dial, blue details and strap, steel-colour exterior, display back and 6237953-style number.
2 · Repeat both dimensions
Show calibration and zero, crown-excluded case width, centred height and a zeroed film-free weight.
3 · Prove movement and operation
Name the movement; show winding, setting, full chronograph cycle, multi-position timing, reserve and pressure evidence.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Record coverage for movement, chronograph, timing, reserve, crystal, strap, clasp, crown, pushers and any agreed pressure result.
Flexible options
Deposit, QC & Final Payment
After IW371446 and its photographed silver-white/blue, display-back configuration are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after the exact-unit record matches the agreed terms.
- 1. Confirm dial, blue details and strap, clasp, display back and back number
- 2. Pay US$20 deposit to start sourcing and exact-unit QC
- 3. Review film-free macros, repeated dimensions, weight, actual movement, full chronograph cycle, timing, reserve, crystal and pressure proof
- 4. Pay balance only after approval; then shipment begins
Product, evidence and order questions
IWC Schaffhausen Portugieser IW371446 Replica Watch FAQ
What do the ten IW371446 photos confirm?
They show a silver-white vertical two-register chronograph-style dial, blue Arabic numerals and leaf-style hands, steel-colour case, crown and two pushers, dark-blue glossy crocodile-pattern strap, deployant clasp, exhibition-back automatic mechanical appearance, one 13.8 mm thickness image and one 40.9 mm case-body span image.
Is the pictured dial blue?
No. The dial field appears silver-white. The blue impression comes from the Arabic numerals, dot markers, central hands, register hands and dark-blue strap. Describing it as a blue dial would misstate the photographs.
What is the main conflict with the genuine IW371446?
IWC specifies a standard solid caseback and calibre 79350 with 31 jewels for the genuine reference. The replica photos show a display back with C.69355 and 27 JEWELS-style wording. That is a major construction and labelling mismatch.
Does the 40.9 mm photo prove an exact genuine-size match?
No. The jaws appear to measure the main case body and the display matches IWC's official 40.9 mm diameter, but one photo does not establish calibration, manufacturing tolerances, construction, reference identity or authenticity. It is a sample reading only.
How should the 13.8 mm thickness be compared with IWC's 12.5 mm figure?
The sample image is about 1.3 mm higher than the current official historical-page specification. The photo does not show calibration or whether the highest crystal and back points are centred, so retain the difference and request a repeat instead of treating it as a certified value.
Do C.69355 and 27 JEWELS-style markings identify the movement?
No. They can be recorded as visible decorative text, but engravings and rotor design do not establish calibre, component count, jewel count, origin or service compatibility. Ask for the actual replica movement name and service route.
Are the chronograph functions proven by the photographs?
No. Several stills show different hand positions, but they are not one uninterrupted start-stop-reset sequence. Request clear evidence of running small seconds, start, stopped-minute accumulation, stop and clean zero reset on the exact unit.
Does the ZF-style hang tag prove the factory?
No. It is a removable accessory photographed next to the watch. It does not prove factory, batch, movement, grade, source or that the tag will be included with delivery.
Are 3 bar, sapphire and 44 hours verified for this replica?
No. Those are official genuine-watch specifications or visible back text, while the sample set contains no pressure result, crystal material test or timed reserve log. Each claim requires its own exact-unit evidence.
How do I order this IWC Portugieser replica?
Record IW371446, the silver-white and blue two-register dial, steel-colour exterior, dark-blue crocodile-pattern strap, deployant clasp, exhibition back and 6237953-style number. Then request film-free macros, repeated dimensions, actual movement, full chronograph operation, several-position timing, timed reserve, crystal and any agreed pressure proof. The listed price is US$627 and a US$20 deposit starts sourcing and QC.