Breitling · Superocean Automatic 46 Black Steel Direction
Breitling Superocean M17368D71C1S2 Replica Watch
Ten supplied photographs show a blue dial with large 12/9/6 numerals, date at 3, red-tipped central hand, dark 15/30/45 dive-style bezel, dark case, blue rubber strap, solid back marked M17368 and serial-style number 7228323, plus calliper, scale, directed-light and timing-machine views. The pictured watch reads about 45.8 mm across one horizontal placement, 16.9 mm on one side placement and 111 g on one scale; the timing screen shows +7 s/day, 275 degrees and 0.0 ms at one moment.
Resolve the strap and buckle before ordering
Breitling's exact genuine M17368D71C1S2 page specifies a pushbutton folding clasp, but the supplied photograph appears to show a conventional pin/tang buckle. Confirm the actual blue strap, 24-20 size marking and buckle that will ship.
Existing media retained
Source Video Kept; Copy Written from Ten Still Photos
The original MP4 remains on this page and its media URL returned a valid partial response. It was not watched, and no technical statement below comes from it. The still photographs remain the auditable source for visible details.
Photo evidence at a glance
Dimensions Match the Intended Scale; Performance Still Needs Context
About 45.8 mm
One horizontal calliper placement, close to the genuine reference's official 46 mm context.
About 16.9 mm
One side placement, close to the official 16.85 mm context; tallest-point contacts are not controlled.
About 111 g
One scale snapshot before controlled tare, film check and final strap-and-buckle confirmation.
+7 s/day snapshot
Useful single-screen evidence, not a multi-position or wear-rate guarantee.
Six supporting QC views
Strap, Sizing, Light, Weight & Timing Evidence
Blue rubber strap detail
Large BREITLING lettering and adjustment holes are visible; confirm length, 24-20 marking and the actual buckle supplied.
About 16.9 mm pictured thickness
The display is close to Breitling's official 16.85 mm context, but contact points and calibration remain uncontrolled.
About 45.8 mm pictured width
The reading is close to the official 46 mm diameter; request a crown-excluded repeat with both jaw contacts visible.
Cyan/green directed-light response
Hands, markers and bezel pip respond at one moment; charging and decay are not documented.
About 111 g on one scale
Tare, calibration, protective film and final strap-and-buckle configuration are not controlled.
+7 s/day timing snapshot
The screen also shows 275 degrees, 0.0 ms and 28,800; position, duration and winding state are absent.
Ten-photo boundary
What the Current Images Settle—and What They Do Not
Confirmed in the photographs
Blue dial and rubber strap, dark case and bezel, dial/back markings, matching side/back serial-style number, pin-buckle appearance, two calliper readings, one scale view, directed-light response and one timing screen.
Not independently confirmed
DLC or steel grade, crystal and bezel material, movement identity, jewels, reserve, certification, bezel/crown operation, multi-position rate, lume decay, pressure resistance or the final buckle supplied.
Best next request
One labelled unit with explicit diameter/thickness contacts, zeroed weight, strap and buckle record, continuous control demonstration, movement view, multi-position timing, timed reserve and any agreed pressure result.
Breitling Superocean replica buyer guide
M17368D71C1S2 Guide: Buckle, Size, Timing & Exact-Unit QC
Start with the exact-reference clue, then check the actual buckle
The dial and back point to the M17368 family, and the photographed 45.8 mm width, 16.9 mm side reading and 24-20 strap marking sit close to Breitling's official 46 mm, 16.85 mm and 24/20 dimensions. The most important mismatch is equally visible: the photo appears to show a pin buckle, while the official M17368D71C1S2 page specifies a pushbutton folding clasp. Put the exact offered strap and buckle in the written order record.
The 46 mm-class black-and-blue format is intentionally assertive
Large 12, 9 and 6 numerals, a dark bezel with oversized 15/30/45 markings, broad hands and a vivid blue strap make this a high-contrast tool-watch configuration. On a smaller wrist, diameter and 16.9 mm-class height can matter more than strap softness. Request a straight wrist photo and crown-excluded measurement instead of judging fit from a close-up.
Read 45.8 mm as evidence of one placement
The horizontal calliper display appears near 45.8 mm, close to the genuine reference's published 46 mm diameter. That agreement is useful for scale comparison but does not authenticate the case or guarantee the exact measurement method. A repeat should show both jaw contacts, exclude the crown where stated and include a second maximum-width reading.
The 16.9 mm view makes cuff clearance a real question
Breitling publishes 16.85 mm for the genuine model, and the supplied side calliper image reads about 16.9 mm. The visual agreement helps buyers understand the intended tall Superocean profile. It still does not prove crystal shape, caseback height, gasket construction or material, so request a perpendicular highest-to-lowest reading on the shipping unit.
About 111 g should be repeated with a controlled setup
The scale image suggests this rubber-strap watch is substantially lighter than the 178 g mesh-bracelet Superocean Custom sample. A useful order-specific weight photo should show a zeroed scale, the complete watch, any protective film and the exact buckle that will ship. That also helps resolve whether the strap-and-buckle configuration has changed.
The +7 s/day screen is a starting point, not a promise
A single screen shows +7 s/day, 275 degrees amplitude, 0.0 ms beat error and 28,800. Those numbers can change with position, winding state, lift-angle setting and test duration. For an automatic replica watch comparison, ask for dial-up, crown-down and another relevant position after consistent winding, plus the movement identity in writing.
Pressure language must stay separate from visible text
The dial and back carry 2000M/6600FT-style wording, and Breitling rates the genuine reference to 200 bar. Neither source is a pressure result for this replica. Buyers arriving through waterproof replica watch searches should receive a precise answer: test the exact unit, state test pressure and date, and record permitted use and warranty treatment.
Directed-light colour is not a lume endurance test
The supplied image shows cyan/green response from the hands and markers and a green pip near 12. It does not show how the watch was charged or how brightness changes. If night readability matters, request identical exposure at zero, five, thirty and sixty minutes with the unit identifier in frame.
Use the case and back numbers as continuity clues
The same serial-style number 7228323 appears on the side and solid back, while M17368 is also visible on the back. That helps tie two photographs together, but serial-style engraving is not authentication, movement proof or a factory declaration. The final QC set should keep the identifying markings, dial and buckle in one continuous record.
Natural search language should lead back to evidence
Breitling Superocean replica, Breitling replica watch, luxury replica watch and high quality replica watch describe how buyers search. On a useful product page those phrases lead to measurable choices: case size, strap and buckle, weight, timing snapshot, lume behaviour, movement evidence, pressure test, price and QC terms. They should never replace those facts.
The existing MP4 is retained without becoming a source
This page keeps the original product video and verifies that the media file responds, but the copy was written without watching it. That boundary is deliberate: the ten still photographs are auditable one by one, and any later functional claim should be tied to a labelled exact-unit demonstration rather than assumed from an unreviewed clip.
Compare three related models by a real buying difference
The Superocean Custom page changes to a blue dial, blue bezel and steel-tone mesh bracelet at about 178 g. The Superocean AB201016-G827-154A page uses a pale dial, blue bezel and mesh bracelet with about 153 g pictured. The Royal Oak Offshore 15720ST page keeps a blue rubber diver direction but changes to an angular 42 mm-class case. Choose by wrist footprint, weight, bracelet texture and visual architecture—not by colour alone.
Genuine-reference context was checked against Breitling's official Superocean Automatic 46 Black Steel M17368D71C1S2 page. Official genuine specifications and the replica's photo record remain separate evidence sets.
Genuine-reference context only
Where the Photo Record Aligns—and Where It Stops
Breitling's official M17368D71C1S2
Breitling lists a 46 mm DLC-coated steel case, 16.85 mm thickness, 24 mm lug width, blue 24/20 rubber strap, DLC-coated pushbutton folding clasp, calibre 17, approximately 38 hours, 28,800 vph, 25 jewels, solid screwed back, unidirectional ratcheted bezel, screw-locked crown, convex sapphire and 200-bar context.
This replica's current photo record
About 45.8 mm, 16.9 mm and a 24-20 strap marking visually align with the intended scale. The photos also show about 111 g and a +7 s/day timing screen. They do not verify official materials, calibre, reserve, jewels, crystal, gaskets or pressure rating, and the pictured pin-buckle appearance conflicts with the official folding-clasp specification.
Strap, weight and case-shape comparisons
Three Related Sports Watches with Meaningful Differences
These links compare the things a buyer will feel and see: rubber versus mesh, about 111 g versus 153–178 g pictured, and round 46 mm-class scale versus angular 42 mm-class architecture.
Blue mesh alternative
Superocean Custom
The linked page keeps a dark blue-on-blue diver direction but changes to a polished steel-tone case and Milanese/mesh bracelet. Its photos show about 46.1 mm, 16.4 mm and 178 g—roughly 67 g heavier than this page's scale image. Choose it for mesh texture and stronger wrist mass; keep M17368D71C1S2 for blue rubber, dark casework and large Arabic numerals.
Pale-dial mesh alternative
Superocean AB201016-G827-154A
This option changes to a white/silver dial, blue bezel and mesh bracelet. Its archive shows about 14.9 mm and 153 g, making it visibly brighter and about 42 g heavier than this rubber-strap sample while still thinner in the supplied side readings. Choose it for dial contrast and bracelet texture; keep the current model for a darker tool-watch profile.
Angular rubber diver alternative
Royal Oak Offshore 15720ST
The linked sample also uses blue rubber and a diver layout, but its angular octagonal case, exposed fasteners and 42 mm-class scale create a more compact yet more architectural presence. Choose it for sharp geometry and a smaller nominal footprint; keep the Superocean for a round 46 mm-class case, oversized numerals and blacksteel-style appearance.
How Time-mimic Should Handle an M17368D71C1S2 Inquiry
The order record should anchor every promise to one labelled watch and explicitly resolve the photographed pin-buckle appearance against the official S2 folding-clasp specification.
1 · Lock the configuration
Record blue dial, dark case/bezel, blue 24-20 rubber strap, actual buckle and current US$567 price.
2 · Repeat measurable facts
Show crown-excluded diameter, tallest thickness, zeroed weight, lume sequence and multi-position timing on the exact unit.
3 · Prove requested functions
Document bezel, crown, date, movement, reserve and any agreed pressure test without borrowing genuine-reference claims.
After-sales protection
Warranty & Shipping
Every watch includes daily maintenance tools, a 365-day free warranty, replacement within 30 days for confirmed quality problems, and replacement for a shipment confirmed lost in transit. Record coverage for the selected strap and buckle, dimensional variance, bezel, crown, date, movement, timing, reserve and any agreed pressure result.
Flexible options
Deposit, QC & Final Payment
After M17368D71C1S2, the blue strap, actual buckle and required evidence are written down, a US$20 deposit starts sourcing and QC. Pay the remaining balance only after the exact-unit record matches those terms.
- 1. Confirm the exact reference, blue strap and actual buckle
- 2. Pay US$20 deposit to start sourcing and exact-unit QC
- 3. Review dimensions, weight, controls, movement, timing, reserve and pressure evidence
- 4. Pay balance only after approval; then shipment begins
Product, evidence and order questions
Breitling Superocean M17368D71C1S2 Replica Watch FAQ
What is confirmed by the ten Superocean M17368D71C1S2 photos?
They show a blue dial, large 12/9/6 numerals, baton markers, date at 3, red-tipped central hand, dark case and bezel, blue rubber strap, solid marked caseback, dark pin-buckle appearance, two calliper views, one scale view, one directed-light view and one timing-machine screen.
Does the photographed watch have the official M17368D71C1S2 folding clasp?
The photograph appears to show a conventional pin or tang buckle, while Breitling's exact genuine S2 reference page specifies a DLC-coated steel pushbutton folding clasp. Confirm the actual strap and buckle on the unit offered before payment; the photographed mismatch is not hidden or automatically resolved.
Are 45.8 mm and 16.9 mm guaranteed dimensions?
No. They are approximate readings visible in two supplied calliper photographs. Jaw contacts, calibration and measurement procedure are not controlled. Ask for a crown-excluded diameter and a perpendicular tallest-point thickness measurement on the selected unit.
Does the about 111 g photo guarantee delivery weight?
No. It is one scale snapshot with unknown calibration, tare, protective film and final strap configuration. Ask for a zeroed repeat on the exact watch and strap that will ship.
What does the timing-machine photo establish?
It records one screen showing +7 seconds per day, 275 degrees amplitude, 0.0 milliseconds beat error and 28,800 at one moment. Position, lift angle, test duration, winding state and multi-position stability are absent, so it is a snapshot rather than a movement guarantee.
Is this Breitling Superocean replica waterproof to 2000 metres?
No such conclusion follows from dial or caseback text, visual resemblance or the genuine reference's official 200-bar specification. A waterproof replica watch claim needs a documented pressure test for the exact unit plus written permitted-use and warranty terms.
Does the page prove an automatic movement and 38-hour reserve?
No. The genuine M17368D71C1S2 uses Breitling calibre 17 and Breitling publishes about 38 hours, but the replica's movement identity, jewels and reserve are not visible in the supplied photographs. Request movement and timed reserve evidence for the selected unit.
What does the directed-light image prove about lume?
It shows cyan or green response from hands and markers and a green bezel pip at one moment. The charge source, charge duration, starting brightness, colour consistency and decay are not documented. Timed photographs are needed for an endurance comparison.
Was the existing product video used to make technical claims?
No. The existing MP4 is retained and its media URL was checked for a valid partial response, but it was not watched. All descriptive claims on this rewrite come from the ten still photographs, the existing commercial terms and separately labelled official genuine-reference context.
Which related sports models are most useful to compare?
Superocean Custom changes to a steel-tone mesh bracelet and about 178 g pictured weight; Superocean AB201016-G827-154A adds a pale dial and mesh bracelet; Royal Oak Offshore 15720ST keeps blue rubber diver styling but changes to a smaller angular 42 mm-class case.